Replacement Tip - 100mm long - 3mm width

Features: 4x Holes for Shocks 4x Rubber feet on the bottom 2x Rubber Anti-Slip Stripes on the car stand area 1x hole for motor placement during soldering Technical Data: Height: 33mm (table till car stand area) Width: 108mm (Platform for the car) Length: 165mm (Platform for the car) Diameter of the holes for the shocks: ca. 13mm Diameter of motor hole: 54x33mm Weight: 177g

Features: 4x Holes for Shocks 4x Rubber feet on the bottom 2x Rubber Anti-Slip Stripes on the car stand area 1x hole for motor placement during soldering Technical Data: Height: 62mm (table till car stand area) Width: 115mm (Platform for the car) Length: 165mm (Platform for the car) Diameter of the holes for the shocks: ca. 13mm Diameter of motor hole: 54x33mm Weight: 290g

The new infrared thermometer uses a classic TO-4 thermopile sensor. This sensor is build from 116 little thermoelements with an active surface of 545 µm diameter on a silicium chip. The sensorelement absorbes the energy and creates with that the output signal. Depending on the surface, the measured figure can vary even with the same temperature. Therefore the thermometer can...

The Hobby Knife Set includes a variation of handles and blades for many kinds of materials.

Spare blades for the Ruddog Hobby Knife or similar ones.

Features: 65 W Power regulatet temperature span from 180 to 480° C changeable soldering tips big display Input Voltage: 100-240V Dimensions station: 128x104x79mm Dimensions handle: 128x66x79mm Weight: 0.7kg

Fits the RSI60 Soldering Iron as well as the RSS65 Soldering Station. Includes five different soldering tips.

Features: 60 W Power regulatet temperature span from 180 to 480° C changeable soldering tips Celsius and Fahrenheit display (changeable) LED-display Sleep mode Wire length: 1.5mm

The wrenches fit all electric drills with a 1/4" socket. The set includes: 1x Hex 1.5mm 1x Hex 2.0mm 1x Hex 2.5mm 1x Hex 3.0mm The wrenches are made of HSS steel and have colour coordination for easy identification.

The wrenches fit all electric drills with a 1/4" socket. The set includes: 1x Hex 1.5mm 1x Hex 2.0mm 1x Nut 5.5mm 1x Nut 7.0mm The wrenches are made of HSS steel and have colour coordination for easy identification.

The wrenches fit all electric drills with a 1/4" socket. The wrenches are made of HSS steel and have colour coordination for easy identification.

The wrenches fit all electric drills with a 1/4" socket. The wrenches are made of HSS steel and have colour coordination for easy identification.

The wrenches fit all electric drills with a 1/4" socket. The wrenches are made of HSS steel and have colour coordination for easy identification.

The wrenches fit all electric drills with a 1/4" socket. The wrenches are made of HSS steel and have colour coordination for easy identification.

The wrenches fit all electric drills with a 1/4" socket. The wrenches are made of HSS steel and have colour coordination for easy identification.

The wrenches fit all electric drills with a 1/4" socket. The wrenches are made of HSS steel and have colour coordination for easy identification.

Overall length: 180mm Bristel length: 30mm

Pit Mat 100 x 70 cm

Measurements: 1200x600mm 1.2mm thickness

Check your ball or gear diff hardness - for 1/10 touring or offroad cars with 7mm wheel nut. Take care: This tool will not show you a value of your used oil viscosity. It just shows a value which can be compared between two diffs. A higher number means a harder diff. Different devices will show different values - even if the same diff is measured. You need to compare always...

In order to optimally coordinate a car that can be driven in a balanced way in all situations, a computer-controlled weighing system is essential. SKYRC's Bluetooth Corner Weight System can help achieve just that. The system measures the weight on each individual axis on the model. Thus, it pretty much reflects the existing weight distribution of the racing car on each wheel...

Suitable for 1/10 touring cars (or other cars up to 80mm tire diameter). Needs to by used with an Android / iOS app which can be downloaded for free.

Suitable for 1/8 cars (or other cars up to 100mm tire diameter). Needs to by used with an Android / iOS app which can be downloaded for free.

SkyRC 600069-06 - Aluminium Setup Wheels (4) - BLACK

Aluminium Setup Wheels (4) - BLUE

To measure the chassis droop correctly and precise you will need a chassis droop gauge. With this tool you can measure the positive and negative chassis droop as well. The chassis droop is one of the most important setup parameter as this take effect on the chassis rolling as well as on the weight balance during acceleration and braking and in corners. Scope of Supply: 2x...

Aluminium Chassis Droop Gauge - 4.0 - 6.6mm - BLACK Technical Data: Measurement range: 4 - 6,6mm Step: 0,2mm

Aluminium Chassis Droop Gauge - -3.0 - 10.0mm - BLACK Technical Data: Measurement range: -3.0 - 10.0mm Step: 1mm

With this gauge you can measure the right height of your car, or let`s say you can measure the clearance between the chassis bottom and the ground. Similar than the chassis droop the right height take effect on the rolling of the chassis, the traction and the speed you can have through a corner. Technical Data: Measurement Range: 3,8 - 7mm Steps by: 0,2mm Scope of Supply: 1x...

Features: 4x Holes for Shocks 4x Rubber feet on the bottom 2x Rubber Anti-Slip Stripes on the car stand area 1x hole for motor placement during soldering Technical Data: Height: ca. 30mm (table till car stand area) Width: ca. 105mm (Platform for the car) Length: ca. 165mm (Platform for the car) Diameter of the holes for the shocks: ca. 13mm Diameter of motor hole: 54x33mm

Features: 4x Holes for Shocks 4x Rubber feet on the bottom 2x Rubber Anti-Slip Stripes on the car stand area 2x magnetic surfaces for small parts 1x hole for motor placement during soldering Technical Data: Height: ca. 60mm (table till car stand area) Width: ca. 105mm (Platform for the car) Length: ca. 165mm (Platform for the car) Diameter of the holes for the shocks: ca....

SkyRC SK600089BK - SkyRC Led Pit Light Black SKYRC pit light features convenient sensitive controls with adjustable light color and brightness / dimming. This pit light employs clean, stress free lighting LED technology that eliminates the harsh whites of fluorescent making it ideal for general illumination. The light incorporates 32 high-power LEDs and uses 11 watts or less...

This very small multi-port distributor features 3x DC output ports which support banan connector (4mm) and alligator clip. 2x 5V/2.1A USB ports which support smart phone and other devices. The DC input power lead is changeable. Input Voltage: 6-18V Max. Current: 10A USB Power: 5V/2.1A Dimensions: 63.7x44x22.5mm Weight: 46g

Tyre Rubber Sander Features: Rubber tire sander for touring class Powerful high torque DC motor with dual metal bearings Light-weight aluminum case Quiet operation Technical Data: Dimension (LXWXH): 138 x 73 x 70mm Input Voltage: DC 6V-12V Minimum Input Current: 10A Case Material: Aluminum Power Supply Cable: Silicon Cable with Banana Plug

Cutting Tool included. No wheel adapter included! Please purchase seperatly!

Cutting Tool included. No wheel adapter included! Please purchase seperatly!

Steel Cutting Tool for tire truer (e.g. HUDY) 21mm length - 2.1mm width. Does NOT fit for HUDY tire truers - they need a maxium of 1.5mm.

Fits all tire truers with 8mm shaft. The adapter fits all 1/12 onroad tires (front as rear) and WGT tires.

Fits all tire truers with 8mm shaft. The adapter fits all 1/12 onroad tires (front as rear) and WGT tires.

Fits all tire truers with 8mm shaft. The adapter fits all Tamiya F103/F104 tires. 14mm hex hub in the rear - 8mm/10mm bearing in the front.

Fits all tire truers with 8mm shaft. The adapter fits all 1/10 touring car tires with 12mm hex.

This tool will be used if your ball heads are very tight. You can modify the ball joint by using this tool. It will help to have a free moving suspension.

This tool will be used if your ball heads are very tight. You can modify the ball joint by using this tool. It will help to have a free moving suspension.

Set of 10pcs - 10mm outer diameter.

Suitable for a range from 19 to 30mm ride height.

WHAT A BEAUTY! 17x10x3cm size - perfect size for 1:10 / 1:12 Onroad cars.

145mm total length.

Place it between your bulkheads to make sure to have always straight bulks without any tweak. Suitable for cars with 19mm or 22mm gap between the bulkheads. For example: Yokomo BD7 XRAY T4 Team C TC10 Tamiya 418 Hot Bodies Pro 5 ARC ...and many more. Check your gap!

Eliminate tweak with the T-Work's Tweak Terminator Usage: 1. Clean bottom of main chassis and ensure no screws or parts protrude beyond the bottom surface of main chassis 2. Loosen upper chassis screws and place touring car on hard flat surface (e.g. glass) 3. Press Tweak Terminator down onto front and rear shock towers and tighten upper chassis screws NEW V2 - splitted into...

Eliminate tweak with the T-Work's Tweak Terminator Usage: 1. Clean bottom of main chassis and ensure no screws or parts protrude beyond the bottom surface of main chassis 2. Loosen upper chassis screws and place touring car on hard flat surface (e.g. glass) 3. Press Tweak Terminator down onto front and rear shock towers and tighten upper chassis screws NEW V2 - splitted into...

Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo...

Super short nut socket driver.

Super short nut socket driver.

Spare part for TT-042 tool set.

Place it between your bulkheads to make sure to have always straight bulks without any tweak. Suitable for cars with 20mm gap between the bulkheads. For example: Mugen MTC-1 Infinity IF14 ...and many more. Check your gap!

Suitable for 1/10 on-road/off-road, 1/8 on-road/GT/off-road. Description: After fold in smaller size,easy to pack. Bottom with carbon fiber balance plate, turn out the balance plate can increase holder stability. Each holder with 2 different size holes. Each size holes with 4 spacers, using which spacers depend on the shocks. Each holes with laser mark, easy to identify the...

Place it between your bulkheads to make sure to have always straight bulks without any tweak. Suitable for cars with 18mm or 19mm gap between the bulkheads.

Turnbuckle Duo- purpose Adjustment Tool T-Work's has a new product to aid in adjusting your Turnbuckles. The tool has a 2mm extended bit to allow easier adjusting for turnbuckles with hole. In addition, it comes with a 4mm turnbuckle tool on the other end.

Turnbuckle Duo- purpose Adjustment Tool T-Work's has a new product to aid in adjusting your Turnbuckles. The tool has a 1.6mm extended bit to allow easier adjusting for turnbuckles with hole. In addition, it comes with a 4mm turnbuckle tool on the other end.