An F1 spool helps eliminate 'diffing out' of the rear pod on extra high grip black carpet conditions and gives your F1 more corner exit speeds. This spool also greatly reduces the weight compared to a gear diff or standard ball diff for a cooler running motor and increased acceleration. Our sturdy design eliminates any holes in the shaft for increased shaft durabilty. The...

Easy to install and stronger holding strength than the stock clips.

Universal type tire sander arbor set that can be used on multiple style of arbor or sander systems including even electric drills. The machined alloy 7075 arbor will fasten various 1/10th style wheels from off road or on-road vehicles. The arbor works with; 12mm hex wheels- 1/10 Touring car, Street Eliminators, Off Road buggies etc. 14mm hex wheels- 1/10 rear F1 tires 10mm...

Exotek is proud to release our first entry into the 1/10 F1 tire segment! Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, Exotek has taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set up. On top of that they have contracted to have these produced by...

Exotek is proud to release our first entry into the 1/10 F1 tire segment! Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, Exotek has taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set up. On top of that they have contracted to have these produced by...

Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, Exotek has taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set up. On top of that they have contracted to have these produced by the premier RC rubber touring car tire factory in Japan, using premium...

Sold as 1 pair of wheels f or use with Exotek F1 tires only. For use on 1/10 pan car style F1's such as by Exotek, Xray and Schumacher etc. Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, we have taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set...

Sold as 1 pair of wheels f or use with Exotek F1 tires only. For use on 1/10 pan car style F1's such as by Exotek, Xray and Schumacher etc. Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, we have taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set...

Super F1 2023 style race body for the F1Ultra and similar dimensioned narrow style 1/10 F1 pans cars. 2 scale option side intake styles included- scooped RB style via add on molded trims and classic flat style by not using the added trims. Modern design with slim style side pods with the addition of high downforce aero details for good looks and high performance. The body is...

Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, Exotek has taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set up. On top of that they have contracted to have these produced by the premier RC rubber touring car tire factory in Japan, using premium...

Lightweight 7075 ball ends for use on the F1Ultra steering ends or sway bars. Tighter fitting for reduced play and hard anodized for durability. Set of 4. Thread length is 4mm. Do not use for the camber links or side links.

New V2 FIRM Yellow 40X (40 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire. New redesigned foam inserts for improved fit and performance. The yellow sets are best suited for hot asphalt racing weather or low grip tracks and creates less aggressive steering compared to the 38X RED fronts . Designed...

New V2 MEDIUM RED 38X (38 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire. New redesigned foam inserts for improved fit and performance. The red sets are suited for carpet racing and high grip asphalt racing and creates more aggressive steering compared to the 40X yellow fronts . Designed 100%...

New V2 soft DOUBLE RED 36X (36 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire. New redesigned foam inserts for improved fit and performance. The double red sets are suited for carpet racing and creates more aggressive steering compared to the 38X red fronts . Designed 100% from the ground up, and...

New light weight 1/4" titanium axle replacement for the Exotek F1Ultra ball diff for more rpm's and lighter rear pod movement. About 10 grams lighter than the stock steel axle yet stronger than comparable carbon fiber or aluminum axles. Direct replacement for the F1Ultra.

Offers lower friction than the alloy ball for the smoothest steering pin movement and suspension action. Insert the ball into the cup from the narrow end of the cup.

Wider shock mount geometry provides less chassis roll to maximize performance on high grip carpet tracks.

Lowered mounting and less flex, best suited for high grip carpet tracks. Not for older F1 Ultras.

Provides more steering for high grip black carpet tracks. For use with LCG shorty packs (20mm or lower) and smaller ESC's such as the Hobbywing XR10 Stock Spec.

New hyper soft 22x compound with newly designed carpet foam insert are suited for carpet racing. Not suited for asphalt due to possible over heating. Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, Exotek has taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and...

Heavy duty alloy pivot cup for Exotek kits such as the Vader and F1Ultra. Replaces the stock nylon cup and uses the stock C-clip. To install the alloy ball press the ball through the slotted side of the cup. Alternative for Exotek 2248 and a tuning option for Exotek R4040.

Heavy duty 7075 alloy clamped racing servo horn. Perfect fit and geometry for robust steering and performance. Check our dimensions above for compatibility. Large M2.5 clamping screw included. For Futaba and all other 25 spline servos.

New specially developed firmer front springs for black carpet racing. Includes; 2265 FIRM FRONT SPRING SET R4505 LARGE GRAB CLIP R4101 M3 THIN WASHER

Rear diffuser that provides extra downforce and rear traction. All 3d printed nylon construction and weighs 10grams. Direct fit for the Exotek F1 Ultra R5 only. Do not over tighten screws or you may damage the diffuser- simply use blue thread lock for screws.

Genuine spare part for your F1 ULTRA!