No results were found for the filter!
Awesomatix AM1202.1 - A12WC - Alu Motor Mount
Genuine Awesomatix part!
€23.00
*
currently 1x in stock
Awesomatix AM1203WC - A12WC - Alu Battery Plate
Genuine Awesomatix part!
€110.00
*
currently 1x in stock
Awesomatix AM1204WC - A12WC - Alu Chassis Plate
Genuine Awesomatix part!
€55.00
*
currently 1x in stock
Awesomatix AM1205.1 - A12WC - Alu Side Stiffener (1 pc)
Genuine Awesomatix part!
€19.00
*
currently 1x in stock
Awesomatix AM1207.1 - A12WC - Alu Bulkhead - left
Genuine Awesomatix part!
€23.00
*
currently 1x in stock
Awesomatix AT1201 - A12 - Steering Block Nut (2 pcs)
Genuine Awesomatix part!
€5.00
*
currently 34x in stock
Awesomatix AT1202 - A12 - Servo Post (2 pcs)
Genuine Awesomatix part!
€12.00
*
currently 4x in stock
Awesomatix AT1204-X - A12WC - Alu Steering Block
Genuine Awesomatix part!
€33.00
*
currently 10x in stock
Awesomatix AT1204-ZT-S - A12 - Steering Block - for ZT Zero Trail Set - SHORT (1 pc)
Awesomatix A12 Steering Block Zero Trail Short. The Steering Block overall height is 1,4mm less, which provides additional 0,7mm space for droop/ride height settings. contains: 1x A12-AT1204-ZT-S
€33.00
*
currently 10x in stock
Awesomatix AT1206 - A12 - Servo Plate Post (2 pcs)
Genuine Awesomatix part!
€10.00
*
currently 3x in stock
Awesomatix AT1207-X - A12WC - Alu Hub - left
Genuine Awesomatix part!
€25.00
*
currently 5x in stock
Awesomatix AT1208 - A12 - Right Hub - for CS1 / SSS-1
Genuine Awesomatix part!
€32.50
*
currently 10x in stock
Awesomatix AT25-2 - A800 - Alu turnbuckle - M3x39mm (2 pcs)
AT25-2 is set of 2x 39mm length Turnbuckles. This optional set can be used as replacement for AT14 parts at the rear "Toe-In Turnbuckles". The thread will go more deep inside of P13-4 Ball Cups and secure the "Toe-In" stay more consistent at impacts. Contains 2pcs of AT25-2
€8.50
*
currently 32x in stock
Awesomatix C1201 - A12 - Graphite Servo Mount Plate
Genuine Awesomatix part!
€16.50
*
currently 4x in stock
Awesomatix C1201-6.0 - A12 - Graphite Servo Mount Plate - for 6WB Set
Genuine Awesomatix part! Needs to be used with C1205-6.0
€18.00
*
currently 2x in stock
Awesomatix C1201-ZT - A12 - Graphite Servo Mount Plate - for ZT Zero Trail Set
Genuine Awesomatix part!
€17.00
*
currently 2x in stock
Awesomatix C1203.1 - A12WC - Body Holder (1 pc)
Genuine Awesomatix part!
€16.00
*
currently 8x in stock
Awesomatix C1204 - A12 - Graphite Front Bumper Plate
Genuine Awesomatix part!
€14.50
*
currently 15x in stock
Awesomatix C1205-6.0 - A12 - Graphite Suspension Plate - 6.0mm shorter Wheelbase
Genuine Awesomatix part! Needs to be used with C1201-6.0!
€40.50
*
currently 3x in stock
Awesomatix C1205-X - A12WC - Suspension Plate
Genuine Awesomatix part! Tech Tipp for A12 drivers which are searching for C1205-1.5: C1205X has the exact same sizes as C1205-1.5 except for the 1,25 mm depth recess for front pivot balls. So C1205X is a direct replacement. Customers just need to turn the plate in the direction to have the milled out area on the upper side and the flat surface on the lower side.
€40.50
*
currently 12x in stock
Awesomatix C1205-X-1.5 - A12WC - Suspension Plate - -1.5mm Wheelbase
Genuine Awesomatix part! Suspension Plate with 1,5mm shorter front wheelbase. It increases the initial steering and reaction of the car and provides a faster direction change. Recommended especially for low, low-med, medium traction conditions.
€40.50
*
currently 7x in stock
Awesomatix C1205-ZT - A12 - Graphite Suspension Plate - for ZT Zero Trail Set
Genuine Awesomatix part!
€40.50
*
currently 5x in stock
Awesomatix C1206 - A12 - Graphite Rear Axle - for CS-1 Spool
Genuine Awesomatix part! Weight of: C1206 - 4.63g ST1212 - 7.56g
€12.00
*
currently 7x in stock
Awesomatix DG1XM - A700 / A800 / A800R - Damper Gauge - V3
Damper Gauge
€18.00
*
currently 10x in stock
Awesomatix DT1214 - A12WC - Downstop Screw Holder
Genuine Awesomatix part!
€3.50
*
currently 7x in stock
Awesomatix EHRC - A12WC - Extra High Roll Center Set
EHRC (Extra High Roll Center) set is +3,8mm higher roll center measured from the lower face of AM1204 compared to ELRC. EHRC is recommended for med/high - high grip conditions. The car will rotate more over the rear end and increases steering. contains: 2pcs ST1244 1pcs ST1249 1pcs ST1250 2pcs ST1261 1pcs ST1262 2pcs ST1251 1pcs ST1253 2pcs SH4X5.5X0.05
€22.00
*
currently 4x in stock
Awesomatix ELRC - A12WC - Extra Low Roll Center Set
Genuine Awesomatix part! ELRC (Extra Low Roll Center) set is what we used in the first A12 car. It is a 0mm positioned roll center measured from the lower face of AM1204. ELRC set is optional for A12WC and A12X cars. ELRC is recommended for low - medium grip conditions. The car will generate more grip by the increased chassis roll.
€35.00
*
currently 12x in stock
Awesomatix HRC - A12WC - High Roll Center Set
Genuine Awesomatix part! HRC (High Roll Center) set is +2mm higher roll center measured from the lower face of AM1204 compared to ELRC. HRC is recommended for medium - med/high grip conditions. The car will be more free and keeps more cornerspeed. contains: 2pcs ST1235 2pcs ST1241 1pcs ST1242-1 1pcs ST1243 2pcs SH5.5X7.7X0.05
€18.00
*
currently 24x in stock
Awesomatix LRC - A12WC - Low Roll Center Set
Genuine Awesomatix part! LRC (Low Roll Center) set is +1mm higher roll center measured from the lower face of AM1204 compared to ELRC. LRC set is the kit's set for A12WC and A12X cars. LRC is recommended for low-medium - medium grip conditions. contains: 2pcs ST1254 2pcs ST1255 1pcs ST1256 1pcs ST1257 2pcs SH5.5x7.7x0.05
€17.00
*
currently 16x in stock
Awesomatix LWRD - A12 - LIGHTWEIGHT Rear Damper Set
Awesomatix A12 LWRD Lightweight Rear Damper set Total weight of the LW Damper set is ~8,7g. This is a reduction of ~18g. compared to the std Damper (~26.7g) The LWRD allows to change the weight BIAS of your car and further adjust it by using additional weights. Furthermore, the use of Alloy material near the Motor will have less interference of the magnetic field, which...
€68.00
*
currently 2x in stock
Awesomatix OR15 - A12 - O-Ring - 1x5mm - Rear Axle (2 pcs)
Genuine Awesomatix part!
€2.50
*
currently 25x in stock
Awesomatix OR153V - A12 - O-Ring - 1.5x3mm - Center Damper (2 pcs)
Genuine Awesomatix part!
€2.50
*
currently 10x in stock
Awesomatix OR155SI - A12 - Silicone O-Ring - 1.5x5mm - for steering blocks (4 pcs)
Genuine Awesomatix part!
€6.50
*
currently 5x in stock
Awesomatix OR230 - A12 - O-Ring - for battery mount and Damper building (1 pc)
Genuine Awesomatix part!
€2.00
*
currently 27x in stock
Awesomatix OR91 - A12 - O-Ring - 1.0x9mm - for Spur Gear (1 pc)
Genuine Awesomatix part!
€1.50
*
currently 12x in stock
Awesomatix OR915 - A12 - O-Ring - 1.5x9mm - for Spur Gear (1 pc)
Genuine Awesomatix part!
€1.50
*
currently 20x in stock
Awesomatix P1213 - A12 - Ball Cup 4.0mm (2 pcs)
Genuine Awesomatix part!
€3.00
*
currently 9x in stock
Awesomatix P14-2 - A700 / A800 / A12 - Body Post Set (4 pcs)
Body Post Set
€10.00
*
currently 67x in stock
Awesomatix SB3X10 - A700 / A800 - M3x10 Button Head Screw x 4
M3x10 Button Head Screw x 4
€4.00
*
currently 42x in stock
Awesomatix SB3X12 - A800 - M3x12 Button Head Screw (4 pcs)
M3x12 Button Head Screw x 4
€3.50
*
currently 10x in stock
Awesomatix SB3X4 - A12WC - Button Head Screw - M3x4mm (2 pcs)
Genuine Awesomatix part!
€3.50
*
currently 3x in stock
Awesomatix SB3X5 - A700 / A800 - M3x5 Button Head Screw x 4
M3x5 Button Head Screw x 4
€4.00
*
currently 33x in stock
Awesomatix SB3X5AL - A700 / A800 - Alu Screws M3x5mm - 7075 T6 (8 pcs)
Especially made from Awesomatix. The actual length is 5.3mm, made of hard A7075 T6 alloy. The screws are useful only for the top side of the car.
€12.50
*
currently 40x in stock
Awesomatix SB3X6 - A700 / A800 - M3x6 Button Head Screw x 4
M3x6 Button Head Screw x 4
€4.00
*
currently 91x in stock
Awesomatix SB3X7AL - A12 - Alu Screws for Rear Wheels - M3x7mm (6 Stück)
Precision machined 7075 T6 alloy screws to mount the rear wheels on the A12 Pan car. Almost x3 times lighter than the steel screws. The actual length of the thread is 7,3mm. (specially adapted for A12 hubs). The actual outer diameter of the head is 4,9mm. Special designed to fit with CRC / BSR / HotRace Wheels. contains: 6pcs SB3X7AL
€11.00
*
currently 1x in stock
Awesomatix SB3X8 - A700 / A800 - M3x8 Button Head Screw x 4
M3x8 Button Head Screw x 4
€4.00
*
currently 29x in stock
Awesomatix SC25X8 - A12 - Cap Head Screw - M2.5x8mm (2 pcs)
Genuine Awesomatix part!
€1.50
*
currently 11x in stock
Awesomatix SC3X5 - A12WC - Rear Wheel Screw - M3x5mm (6 pcs)
Genuine Awesomatix part!
€6.00
*
currently 20x in stock
Awesomatix SF3X10 - A700 / A800 - M3x10 Flat Head Screw x 4
M3x10 Flat Head Screw x 4
€4.00
*
currently 7x in stock
Awesomatix SF3X6 - A700 / A800 - M3x6 Flat Head Screw x 4
M3x6 Flat Head Screw x 4
€4.00
*
currently 49x in stock
Awesomatix SH0.25 - A700 / A800 - 6x3x0.25mm Spacer (Silver) x 10
6x3x0.25mm Spacer (Silver) x 10
€7.50
*
currently 11x in stock
Awesomatix SH01 - A700 / A800 - 6x8x0.1mm Shims (4 pcs)
6x8x0.1mm Shims (4 pcs)
€4.00
*
currently 13x in stock
Awesomatix SH05 - A700 / A800 - 6x3x0.5mm Spacer (Silver) x 10
6x3x0.5mm Spacer (Silver) x 10
€7.50
*
currently 31x in stock