The Porsche 956 is an iconic sports prototype car which was developed along with the start of Group C regulations for the World Endurance Championship in 1982. In the same year, it achieved both Manufacturer’s and Driver’s Championships. This assembly kit recreates the Le Mans version of the 1983 works Porsche 956 which achieved victory at all seven races in the 1983 season!...

The RC10 started as the vision of Team Associated’s founder Roger Curtis (RC) and became one of the most iconic RC cars in history. In celebration of the 40th anniversary of the original RC10, Associated is proud to bring to you the RC10 Classic Jay Halsey Edition kit , a faithful reproduction of Jay’s world championship-winning car that changed the world of RC off road...

PRE-GLUED riber tires for 1:12 scale! Set of four pieces. Front: 25.5mm width - 44mm diameter - rim with standard bearing hub Rear: 38mm width - 45mm diameter - rim with standard 3-screw hub

A CRC Carpet Knife with metric hardware, the MetriCKs. (pronounced "metrix"). Finishing 1-2 at both the 2024 Snowbird and Canadian Nationals, the new car sets a new "metric" for performance, durability and affordability. Our new car platform was a project that started over a year ago. Some of our goals for the new car are; Fast and efficient in the corners Super low center...

Genuine spare and option parts by XRAY!

You want to use a battery with 5mm but you have only 4mm on your ESC? No problem, use this adapters!

Genuine Awesomatix part! Replacement part for ST1202-XA

Tired of your tires claiming half your pit space in a large pile? No more, organize your TC tires with this handy tire Caddy. Suitable for a diameter up to 65mm and made for 24mm width.

Tired of your tires claiming half your pit space in a large pile? No more, organize your VTA tires with this handy tire Caddy. Suitable for a diameter up to 68mm and made for 26+31mm width.

This low profile car stand is perfect for setting up and displaying your 1/10th scale touring car. Race like a pro with precision and ease thanks to its stable design. Take your RC racing experience to the next level with this essential tool.

Maximize your car's performance with our low profile Car Stand - 1/12. The innovative design prevents catching on spur gears, reducing friction and increasing speed. Crafted from lightweight materials, this stand is perfect for 1/12 pan cars.

Expertly organize your small parts with our 5 compartment organizer. Easily access the compartments for quick retrieval. Perfect for small items that tend to get lost, making your work more efficient. Lightweight and compact, it's ideal for any workspace.

Control your grip level with precision application of the traction additive. 5pieces

The Bumper has been designed to support the nose of the body on high grip carpet. We selected the material to be strong enough to withstand extreme racing condition.

The Bumper has been designed to support the nose of the body on high grip carpet. We selected the material to be strong enough to withstand extreme racing condition.

The CRC Black Carpet has many great advantages over the old gray carpet and the ETS carpet, like the high consistent grip level, less tire wear, more forgiving with 1/12 tire choices and so on. But with many things in life there are also some draw backs. Most of them only need some adjustments in driving style and setup, but some of them are more hidden and can result in a...

We updated our very successful Pan-Car Setup System based on customer requests and suggestions throughout last year. The outcome of this is the Pan-Car Setup System V2 which machined from 6061 Aluminum and hard anodized in black. The V2 will now withstand the hardest use cases. The mounting hole is now M3 threaded which makes mounting it to the car much easier. The Pan-Car...

Usually, the servo position and angle of the servo-horn or servo-safer are set with the eye balling method. This method usually results in inaccurate servo positions and incorrect servo horn angle. Our Servo Setup tools are designed to counter this problem and introduce a high repeatability of the servo setup process of today’s R/C cars. The Pan-car Servo Straight Edge is...

The servo position and angle of the servo-horn or servo-safer are set with the eye balling method. This method usually results in inaccurate servo positions and incorrect servo horn angle. Our Servo Setup tools are designed to counter this problem and introduce a high repeatability of the servo setup process of today’s R/C cars. The 1/8 and 1/10 Servo Straight Edge is...

Brass Flathead screws are perfect for lowering the center of gravity in your car. This is due to the fact that brass being more than 10%* heavier than steel. We CNC machined the screw head to perfectly fit in to the countersinks of your cassis plate.

Brass Flathead screws are perfect for lowering the center of gravity in your car. This is due to the fact that brass being more than 10%* heavier than steel. We CNC machined the screw head to perfectly fit in to the countersinks of your cassis plate.

Brass Flathead screws are perfect for lowering the center of gravity in your car. This is due to the fact that brass being more than 10%* heavier than steel. We CNC machined the screw head to perfectly fit in to the countersinks of your cassis plate.

M3x3mm set screws for pinions with a specially machined flat tip to ensure a more reliable fastening of the pinion to the motor shaft.

Pro Ball Diff Grease offers high viscosity for precise, durable gear diffs, perfect for racing. Its advanced formula ensures optimized performance and reliability.

Windy Fan Shroud Open has been designed to be installed at the motor. That is perfect location to cool your stock/modified motor. The Fan Shroud is compatible with the WTF Windy, most Touring Cars and 540 size motors. Fan, Car, and Hardware not included.

Windy Fan Shroud Front has been designed to be installed in front of the ESC and reach over to the motor. That is perfect for stock classes where usually no ESC fan is used and the Fan is mounted in front of the ESC to cool both units. The Fan Shroud is compatible with the WTF Windy, most Touring Cars and 540 size motors. Fan, Car, and Hardware not included.

This shroud is the larger version of our evolution of our 30mm RC Motor Cooling Shroud Pro. This allows the use of the very popular 40mm cooling fans. The fan shroud is compatible with most Touring Cars , most 4 0mm fans and 540 size motors. Fan, Car, and Hardware not included.

This shroud is the evolution of our original 30mm Open Flow Fan Shroud, with enhancements in cooling efficiency by tweaking the fit to allow more airflow, as well as brass inserts which simplify mounting while simultaneously increasing lifetime. The fan shroud is compatible with most Touring Cars , most 30mm fans and 540 size motors. Fan, Car, and Hardware not included.

We have designed this Fan Shroud to channel the Airflow to the whole motor-can of the latest Stock and Modified motors. This greatly reduces the motor temperatures The Fan Shroud is compatible with most Touring Cars , most 30mm Fans and 540 size motors. Fan, Car, and Hardware not included.

We have designed this Fan Shroud to direct the Airflow to the opening in the motor-can of the latest Stock and Modified motors. This greatly reduces the motor temperatures The Fan Shroud is compatible with most Touring Cars , most 30mm Fans and 540 size motors. Fan, Car, and Hardware not included.

2WD Buggy Fan Shroud long is designed to be perfectly suited for Stock Classes and the most forward Motor position. It is compatible with most 1/10 2WD Mid Motor Buggies and Stadium Trucks, 30mm Fans and 540 size motors We recommend to use double sided tape to secure it to the chassis. Some trimming to the Side Guard maybe required due to the motor position. Fan, Car, and...

2WD Buggy Fan Shroud long is designed to be perfectly suited for Stock Classes and the most forward Motor position. It is compatible with most 1/10 2WD Mid Motor Buggies and Stadium Trucks, 30mm Fans and 540 size motors We recommend to use double sided tape to secure it to the chassis. Some trimming to the Side Guard maybe required due to the motor position. Fan, Car, and...

2WD Buggy Fan Shroud long is designed to be installed on top of the battery and directs the flow to the Frontend End-bell openings. It is perfectly suited for Stock and modified Classes. It is compatible with most 1/10 2WD Mid Motor Buggies and Stadium Trucks, 30mm Fans and 540 size motors. We recommend to use double sided tape to secure it to the chassis. Some trimming to...

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

+2mm Rear Link Mount for the Team Associated B7. Manufactured in T6082 Aluminium with inbuilt +2mm raised geometry to avoid use of multiple washers . Completed in a blue anodised finish with a 2nd operation WS logo. Component Weight - 6.1g

Machined 316 Stainless Steel Under Servo Weight for the Team Associated B7. Weighs 24 Grams which is marked in laser etched detail along with WS logo. Manufactured in 316 Stainless Steel, polished finish. NOTE - If using Factory Team 15.5mm Clamping Servo Horn #1370 the clamping screw must be swapped to a button head item for clearance.

B7 - Aluminium +2 -2 Caster Block Link Mounts. Manufactured in 7075 Aluminium incorporating +2mm and -2mm link positions. Single piece aluminium design with machined threads to remove the factory nyloc nut for ease of ball stud removal and adjustment. Component Weight (Pair) - 3.01g

B7 - Aluminium +4 +0 Caster Block Link Mounts. Manufactured in 7075 Aluminium incorporating 0mm and +4mm link positions. Single piece aluminium design with machined threads to remove the factory nyloc nut for ease of ball stud removal and adjustment. Component Weight (Pair) - 3.06g

Machined 26T PEEK Idler Gears Set (3) for the Team Associated B7. We wanted to create the ultimate fit and forget Idler Gear solution for the Team Associated B7 in terms of performance and reliability. No compromise, machined high precision, high performance material, considered design. Redesigned to take 5 X 9 X 3mm Bearings (Supplied) Reducing the bearing diameter to...

B7 One Degree C Block! With all pills in central position with the standard geometry D Block will place the inboard Toe at 1 degree (Effectively -2 degree compared to standard part). This gives option to access 0.5 degree and 0 degree inboard Toe as well as being able to alter pivot width by still having room to position pills in wide or narrow positions! Manufactured in...

O Ring Style Carbon Fibre Battery Mount Set for the Team Associated B7. Single O Ring Design. Compatible with original battery hold downs if you just desire the Carbon Tray! Manufactured from premium matt finish 3mm Carbon Fibre.

Universal 2mm Carbon Fibre Battery Hold Down Tabs. Supplied as a pair (2pcs)

Single Piece Carbon Fibre Rear Wing Brace for Team Associated B7. WS Logo Engraved. Manufactured from premium matt finish 2mm Carbon Fibre.

Carbon Fibre Roll 0.5mm Front Roll Center Shims for Team Associated B7. Supplied as a pair (2pcs). Manufactured from premium matt finish 0.5mm Carbon Fibre. Component Weight - 0.22g (each)

Carbon Fibre Roll 1mm Front Roll Center Shims for Team Associated B7. Supplied as a pair (2pcs). Manufactured from premium matt finish 1mm Carbon Fibre. Component Weight 0.45g (each)

Carbon Fibre Motor Mount for Team Associated B7. Manufactured from premium matt finish 5mm Carbon Fibre.

Manufactured in 316 Stainless Steel with a 35% increase in cross sectional material for improved durability and increased weight over the original manufacturer component. Replaces AE # 92436. Component Weight - 30.03g

Manufactured in 316 Stainless Steel with a 35% increase in cross sectional material for improved durability and increased weight over the original manufacturer component. Replaces AE # 92437. Component Weight - 29.17g

Manufactured in 316 Stainless Steel with a 35% increase in cross sectional material for improved durability and increased weight over the original manufacturer component. Replaces AE # 92436. Component Weight - 30.03g

Manufactured in 316 Stainless Steel with a 35% increase in cross sectional material for improved durability and increased weight over the original manufacturer component. Replaces AE # 92436. Component Weight - 30.03g

B7 Strengthened "Full Brace" D Block With the B7 series the D block is secured to the underside of the gearbox rather than the chassis plate. The WS "Full Brace" D block incorporates the D Block and Roll Bar mount into a singular billet aluminium piece. This allows the D block to be fastened to the transmission case in two planes underneath the box and to the flat back...

B7 Strengthened C Block! Manufactured in T6082 Aluminium with increased wall section surrounding pills and removal of notch compared to original part for improved durability. Replaces AE # 92432. Component Weight - 3.1g