Alu Spacer Set 3mm - 1.5t (orange) / 2.0t (silver) / 2.5t (orange) - (2 pcs each)

Servo Gear Set for SB-2262SG - incl. ball bearings

The Hobbywing XeRun XR10 Pro G3 sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle...

The Hobbywing XeRun XR10 Pro G3X sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle...

High flex series of topdecks for the Xpress Execute XQ11 and XQ3S, featuring a different cutout and a more narrow design to induce more flex into the chassis.

Xpress rear body mount with a middle section cutout to increase chassis flex in the rear area. Two sets of bodypost mount holes to shift the bodyposts to allow for a more forward mounting body.

Genuine Futaba spare parts for your futaba products!

New super light alloy locked spur mount with titanium center bolt for our lightest spur locker yet. Excellent for stock buggy racing to reduce rotating mass and a lower cg. The complete set with optional spur gear shown weighs 9gr- the stock slipper set weighs 22.2grams! Uses a wider range of available spur gear sizes by Exotek and Kimbrough. Attaches right to the stock top...

Almost half the weight of the stock screw at 2.4gr (stock is 4.3gr), this titanium screw lightens your rotating mass and lowers your CG. Direct fit on the stock laydown top shaft and slipper.

Hand held tire and wheel balancing tool set designed to easily balance your tires for optimal handling. Works with many types of cars and trucks that have 12mm hexes (off road and on road), 14mm hexes (1/10 F1) and 10mm bearing front wheels (remove the bearings from the wheel). The faster your car or truck goes the more you will experience tire hop and strange traction...

New 1/8 scale style ver.3 set with larger cva couplers and larger 2.5mm pin. For the Traxxas DRAG SLASH. Also compatible with Traxxas kits using 2wd 2750R arms (2wd Bandit). Put down huge power with our heavy duty hardened steel complete CVA axle sets and diff cups. -Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping...

The ultimate heavy duty pro style steering set for the Associated MT10 and PRO4 SC10 series . Includes left crank, right crank, drag link, 4 bearings, chassis spacer screws and hardware. Robustly designed and engineered to have the most precision thanks to the machined 7075 alloy design that incorporates an additional 4 bearings to connect the drag link, instead of bushings,...

Factory style heavy duty alloy steering hubs for the Associated MT10 and PRO4 SC10 series. Polished blue finish with heavy duty construction for smooth and precise steering operation. Also has machined bearing pockets for super precise bearing fit. Unidirectional design- works either as a left or right hub. Always use blue thread lock and do not over tighten screws.

Factory style heavy duty alloy caster hubs for the Associated MT10 and PRO4 SC10 series. Polished blue finish with heavy duty construction for smooth and precise suspension and steering operation. Always use blue thread lock and do not over tighten screws.

Factory style heavy duty alloy rear hubs for the Associated MT10 and PRO4 SC10 series. Polished blue finish with heavy duty construction for smooth and precise suspension operation. Also has machined bearing pockets for super precise bearing fit. Unidirectional design- works either as a left or right hub. Always use blue thread lock and do not over tighten screws.

Factory fast heavy duty alloy hex hub set for the Associated MT10 and PRO4 SC10 series. Polished blue finish with heavy duty construction for smooth and precise wheel fit. These stronger alloy hex sets provide more secure wheel attachment to preventing rounding out of the expensive wheels and tires. Includes m3 set screws to securely lock the hex to your axle. Always use...

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

HEX SCREW SH M2.5x5 (10)

HEX SCREW SFH M2.5x10 (10)

4.8-8.4V operating voltage 0.052sec / 60° @ 8.4V 3kg-cm @ 8.4V 20x17.8x8mm 7g

Genuine Tamiya spares.

Genuine XPRESS spare spart!

Genuine XPRESS spare spart!

Genuine XPRESS spare spart!

Genuine XPRESS spare spart!

Genuine XPRESS spare spart!

Genuine XPRESS spare spart!

Genuine XPRESS spare spart!

Genuine XPRESS spare spart!

Genuine XPRESS spare spart!

Multifunction turnbuckle tool for easy building and adjusting turnbuckles! In the center is a cutout for sliding in 4mm ball ends to hold them in place during building. A 4mm wrench at the other end for adjusting and a 1.5mm pin to adjust turnbuckles with a adjustment hole!

Included: 3-channel, 2.4 GHz transmitter, 4-channel mini-receiver, instruction booklet Features: 1. 1 additional switch channel for special functions 2. 15 model memory 3. Servo reverse (reverses the direction of travel) and trim function 4. Dual rate channel 1-2 (limits the servo travel) 5. Ergonomically adjustable control unit 6. Blue backlit LCD display Technical data: •...

The new 2024 battery Line of NOSRAM! - Lenght: 97.0mm - Height: 18.5mm - Width: 47.0mm - Weight: 155g NEVER keep your LiPo completely charged or uncharged! Both of these charging states damage the LiPo irreversible and lead to bloating the cells. A completely charged LiPo has the same consequences concering the mount as a completely uncharged LiPo. Please follow the...