1/10th Scale Pre-Assembled 4WD Touring Car with 2.4GHz Radio System and painted BMW 2002 Turbo Body SPECIFICATIONS: Length: 431mm (17") Height: 127mm (5") Width: 200mm (7.9") Wheelbase: 254mm (10") Includes: 4 AA batteries What you need: 2S or 3S LiPo pack with T-plug - HPI Recommends 2S LiPo or #106401 3S LiPo Battery charger for car battery - HPI Recommends #118050, 118051...

1/10th Scale Pre-Assembled 4WD Touring Car with 2.4GHz Radio System and painted BMW 2002 Turbo Body SPECIFICATIONS: Length: 431mm (17") Height: 127mm (5") Width: 200mm (7.9") Wheelbase: 254mm (10") Includes: 4 AA batteries What you need: 2S or 3S LiPo pack with T-plug - HPI Recommends 2S LiPo or #106401 3S LiPo Battery charger for car battery - HPI Recommends #118050, 118051...

20x10x10cm internal size

In order to have a perfectly understandable and smoothly functioning car, you should have a setup system available. Everything else is a compromise. This compromise can be made under certain circumstances. But if you have the time, you should use the setup system. With the setup system, you can read the camber on all four wheels at the same time. The toe gauge can be placed...

In order to have a perfectly understandable and smoothly functioning car, you should have a setup system available. Everything else is a compromise. This compromise can be made under certain circumstances. But if you have the time, you should use the setup system. With the setup system, you can read the camber on all four wheels at the same time. The toe gauge can be placed...

Scale: 1:10 Suitable for: any 1/10 formula chassis - starting with maybe 2015. It does NOT fit for old cars like Tamiya F103 which is used with transversal battery. Scope of delivery: Body Decal sheet Take care: The driver helmet and Halo are NOT included. Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with...

Scale: 1:10 Width: approx. 188mm front / 189mm rear Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear wing Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with the unpainted body shows the actual scope of delivery. The painting example is equipped...

Scale: 1:10 Width: approx. 190mm Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear wing Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with the unpainted body shows the actual scope of delivery. The painting example is equipped with additional...

In most cases, in 2025, preglued wheels will be used - so you can use them (more or less well) already glued out of the bag But there are still classes in which you have to glue the tires yourself. For example, the Tamiya Race Truck Series in the Tamiya Euro Cup - which is essentially what this tool is aimed at. Some people enjoy it - some don't. Those who don't like it - or...

In most cases, in 2025, preglued wheels will be used - so you can use them (more or less well) already glued out of the bag But there are still classes in which you have to glue the tires yourself. For example, the Tamiya M-Chassis Series in the Tamiya Euro Cup - which is essentially what this tool is aimed at. Some people enjoy it - some don't. Those who don't like it - or...

Futaba 2.4GHz transmitter incl. receiver. No batteries included and also no batterycase - we recommend to directly use a LiPo battery instead.

Genuine Turbo spares!

Type: Digital Bearing: Dual Motor Type: Coreless Gear Type: Metal Gear Material: 7075 Aluminum control system: pulse width control working frequence: 1520μs / 333hz operating voltage: dc4.8-8.4v operating temperature range: -10 to + 60 degree operating speed (4.8v): 0.100 sec/60 degrees at no load operating speed (6.0v): 0.080 sec/60 degrees at no load operating speed...

Suitable for 1/10 touring Outer Diameter: 64mm Width: 24mm Hub: 12mm hex

Suitable for 1/10 touring Outer Diameter: 64mm Width: 24mm Hub: 12mm hex

Will fit to any colt transmitter.

Replacement case set - delivered as shown.

ONLY the case set, including decals for 472

Genuine Tamiya Optional Parts.

Charger for 6 cell NiMH battery packs with a charging current of 2 amps and automatic cut-off after charging. With TAMIYA-plug. The LED shows the actually charging status. Technical data: Input voltage: 100-240 V, 50-60 Hz (AC) Charging current: max 2 A / 8.4 V Battery types: NiMH 6 cells Technical details: - automatic cut off after charging - suitable for NiMH 6 cells...

Genuine Tamiya spares!

Not painted, not cut. Including decal sheet. Only the body. No wheels, no chassis!

Made for use with F104 and F104 foam tires. 14mm hex in the rear, 10mm bearing hub in the front.

Width: 35mm Inner Diameter: 40mm Outer Diameter: 60mm

MADE IN GERMANY - made of 2.25mm graphite. Suitable for XRAY T4 20216 - instead of XRAY 301139

Build your own charging wires!

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Technical specs: _ 540 style _ 3.175mm shaft diameter _ brushed design

Heavy duty yet lightweight and finished in a custom polished Exotek blue for that factory look. 2x M3x36 5x M3x24

The Tamiya Group C chassis does not include a foam front bumper as standard. As long as the chassis is just on the shelf, this does not play a major role. Unfortunately, when it goes on the track, the front may be stronger because it cannot be cushioned. The tuning front bumper consists of a carbon base that is dimensioned so large that it supports the foam bumper on top of...

Too little attention is often paid to the connectors. Especially with 5mm connectors - but similarly with 4mm connectors - there are always difficulties in handling. Sometimes a connector is too difficult to put in (and then can't be taken out again...), sometimes it sits too loosely. Kawada has taken on all these challenges and developed its OWN connector. Not a part bought...

Too little attention is often paid to the connectors. Especially with 5mm connectors - but similarly with 4mm connectors - there are always difficulties in handling. Sometimes a connector is too difficult to put in (and then can't be taken out again...), sometimes it sits too loosely. Kawada has taken on all these challenges and developed its OWN connector. Not a part bought...

Tires: SOFT Wheels: Square F103, 14mm Hex Hub Tire Diameter: ca. 58mm Tire Width: ca. 44mm Pre-glued - ready to use.

Tires: HARD Wheels: Square F103, 8mm bearing hub Tire Diameter: ca. 56mm Tire Width: ca. 30mm Pre-glued - ready to use.

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Matches the stock geometry for a perfect fit of 4800-6400 shorty packs. Installs using the stock hardware and instructions as well.

Genuine spare and option parts by ARC!

Setscrew allen m4x4 (10 pcs)

Original Serpent Spare Part

Build your own charging wires!

Build your own charging wires!

Genuine spare part for your F1 ULTRA!

Genuine Exotek spare part.

On side of the charger: 4mm plugs + XH 2S On side of the battery: XH 2S

On side of the charger: XT60 + XH 2S On side of the battery: XH 2S

- Lenght: 93.0mm - Height: 18.5mm - Width: 47.0mm - Weight: 163g - 5mm Plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and the maximum capacity diminishes. Bloated LiPos are NO defect product and consequently out of warranty. NEVER keep your LiPo completely charged...