Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 5
No results were found for the filter!
NEW
PRE-ORDER: Awesomatix A800RR - Car Kit - 190mm Touring - Alu Lower Deck Version PRE-ORDER: Awesomatix A800RR - Car Kit - 190mm Touring - Alu Lower Deck Version
TAKE CARE: The item description shows still the old A800R. We will update with further information as soon as we have them. THE new Awesomatix A800R touring car features: 1. Compact shorter lower deck with an all new shape. The new shape of the lower deck allows the car to dive and roll more without excessive rubbing on the track. 2. New dampers. New dampers have an even...
€780.00 *
NEW
PRE-ORDER: Awesomatix A800RR - Car Kit - 190mm Touring - Graphite Lower Deck Version PRE-ORDER: Awesomatix A800RR - Car Kit - 190mm Touring - Graphite Lower Deck Version
TAKE CARE: The item description shows still the old A800R. We will update with further information as soon as we have them. THE new Awesomatix A800R touring car features: 1. Compact shorter lower deck with an all new shape. The new shape of the lower deck allows the car to dive and roll more without excessive rubbing on the track. 2. New dampers. New dampers have an even...
€780.00 *
NEW
HUDY 294313 - Steel Pinion - Module 1 - 13T HUDY 294313 - Steel Pinion - Module 1 - 13T
Material: Steel Pitch: Module 1 Shaft: 5.0mm Overall width: ca. 13 mm Width of teeth: ca. 7 mm
€21.99 *
currently 1x in stock
NEW
HUDY 294314 - Steel Pinion - Module 1 - 14T HUDY 294314 - Steel Pinion - Module 1 - 14T
Material: Steel Pitch: Module 1 Shaft: 5.0mm Overall width: ca. 13 mm Width of teeth: ca. 7 mm
€22.99 *
currently 1x in stock
NEW
HUDY 294315 - Steel Pinion - Module 1 - 15T HUDY 294315 - Steel Pinion - Module 1 - 15T
Material: Steel Pitch: Module 1 Shaft: 5.0mm Overall width: ca. 13 mm Width of teeth: ca. 7 mm
€22.99 *
currently 1x in stock
NEW
HUDY 294316 - Steel Pinion - Module 1 - 16T HUDY 294316 - Steel Pinion - Module 1 - 16T
Material: Steel Pitch: Module 1 Shaft: 5.0mm Overall width: ca. 13 mm Width of teeth: ca. 7 mm
€22.99 *
currently 1x in stock
NEW
BDTP-5141_ml.jpeg Bittydesign BDTP-5141 - Anti-Slip Table Pad 51x41cm
Practical pit mat made of elastic and durable material. Protects the table and conveniently holds everything you need for working in your car. The mat is 2.5mm thick and rolls up easily. With a total size of 510mm x 410mm, it is relatively compact and therefore particularly suitable for certain applications and space constraints.
€14.99 *
currently 1x in stock
NEW
CRC 1382 - Xti-WC - 1/8 E-Clips (10 pcs) CRC 1382 - Xti-WC - 1/8 E-Clips (10 pcs)
Xti-WC - 1/8 E-Clips TAKE CARE: CRC has updated this item in 2025 and reduced the qty from 100 to 10. At the same time they reduced the price.
€4.99 *
currently 2x in stock
NEW
RCK 250200 - Replacement Front Housing - for RCK Brushless Motors - V2 RCK 250200 - Replacement Front Housing - for RCK Brushless Motors - V2
Fits for 13.5T and also 17.5T version of our motor!
€24.99 *
currently 2x in stock
NEW
Hot Race Tires - 1:10 PanCar Foam Tires - rear - 30 Shore (2 pcs) Hot Race Tires - 1:10 PanCar Foam Tires - rear - 30 Shore (2 pcs)
Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.
€12.99 *
currently 13x in stock
NEW
PRE-ORDER: Team Associated 6041 - RC10 - Kinwald Edition Kit PRE-ORDER: Team Associated 6041 - RC10 - Kinwald Edition Kit
The RC10 started as the vision of Team Associated’s founder Roger Curtis (RC) and became one of the most iconic RC cars in history. In celebration of the 41st anniversary of the original RC10, we are proud to bring to you the RC10 Brian Kinwald Edition kit, a faithful reproduction of Brian’s 1993 world championship-winning car that cemented his legacy in the world of RC...
€459.99 *
NEW
VP Racing 99635 - Transmitter LiPo Battery for Futaba T4PM / T4PV / T4PX / T6PV  T7PX / T10PX - 2200mAh VP Racing 99635 - Transmitter LiPo Battery for Futaba T4PM / T4PV / T4PX / T6PV T7PX / T10PX -...
This is a transmitter only, rechargeable LiPo battery pack that fits some Futaba transmitters and also other radio brands. Fits Futaba Transmitters: T4PM T4PLS T4GRS T4PV T4PX T6K T6PV T7PX T7XC (tight fit) T8J T10J T10PX T12K T14SG T16SZ T18SZ FX20 FX36 Make sure the transmitter battery settings are for 2S LiPo with alarm cut-off set to 6.4 volt. Specs: Type: LiPo...
€29.99 *
currently 10x in stock
NEW
Revolution Design 0713 - XRAY XB4 2025 - Carbon Fiber Battery Mount Set Revolution Design 0713 - XRAY XB4 2025 - Carbon Fiber Battery Mount Set
Designed for both aesthetics and function, this upgrade allows for adjustable battery height using the included black aluminum shims. Also included are screws in various lengths to ensure a precise fit. Best of all, battery changes can be done without any tools. Features: Material: Lightweight and strong carbon fiber Includes black aluminum shims for height adjustment...
€15.99 *
currently 1x in stock
NEW
MXLR - MAX-01-005 - Ball Bearing Oil - V2 (10ml) MXLR - MAX-01-005 - Ball Bearing Oil - V2 (10ml)
Friction is the natural enemy of performance. Ball bearings are the preferred remedy to reduce the friction of drivetrains in RC models. To get the best performance out of Ball bearings they need some special care and treatment. Introducing the BALL BEARING OIL V2 – our newly refined formula developed once again in close collaboration with a specialized German manufacturer,...
Content 0.01 Liter (€899.00 * / 1 Liter)
€8.99 *
currently 978x in stock
NEW
MXLR - MAX-01-006 - Driveshaft and Gears Oil - V2 (10ml) MXLR - MAX-01-006 - Driveshaft and Gears Oil - V2 (10ml)
Driveshafts and gears in RC models are constantly exposed to high loads and rotational stress – making effective lubrication essential to minimize wear without restricting movement. With DRIVESHAFT & GEARS OIL V2 , we present an updated formula that builds on the success of the original version. Developed once again in close cooperation with a specialized German...
Content 0.01 Liter (€899.00 * / 1 Liter)
€8.99 *
currently 474x in stock
NEW
FENIX HDD4 - Pan Car Sphere Left Hub FENIX HDD4 - Pan Car Sphere Left Hub
Suitable for 6.35 axles.
€22.99 *
NEW
Team Titan 54032U2 -  48dp Alu Pinion Lightweight - 32T Team Titan 54032U2 - 48dp Alu Pinion Lightweight - 32T
Alu Pinion by Team Titan 48dp
€7.99 *
currently 3x in stock
NEW
Team Titan 56039U2 - 64dp Lightweight Pinion - Alu - 39T Team Titan 56039U2 - 64dp Lightweight Pinion - Alu - 39T
The Team Titan pinions are lightweight and hard coated. They have the same quality as standard pinions, but are much lighter. The pinions fit a 3.175mm shaft. Please note: The name of the brand is Team Titan - the pinions are not made from Titan.
€7.99 *
currently 3x in stock
NEW
Team Titan 56040U2 - 64dp Lightweight Pinion - Alu - 40T Team Titan 56040U2 - 64dp Lightweight Pinion - Alu - 40T
The Team Titan pinions are lightweight and hard coated. They have the same quality as standard pinions, but are much lighter. The pinions fit a 3.175mm shaft. Please note: The name of the brand is Team Titan - the pinions are not made from Titan.
€7.99 *
currently 3x in stock
NEW
Ruddog Products 0810 - RP543 - 540 Sensored Brushless Motor - Modified - 3.5T Ruddog Products 0810 - RP543 - 540 Sensored Brushless Motor - Modified - 3.5T
Building on the successful RP542 platform, the RP543 has been further developed to deliver maximum performance, efficiency, and control on the track. A newly designed stator improves the power delivery and response, while the high-precision sensor unit ensures accurate throttle control and smooth operation. Special attention was given to reducing operating temperatures....
€89.99 *
currently 1x in stock
NEW
Square SGX-108S - Alu Senk-Unterlegscheibe - M3 - SILBER (6 Stück) Square SGX-108S - Alu Senk-Unterlegscheibe - M3 - SILBER (6 Stück)
outer diamater: 6mm, inner diameter: 3mm Replacement for SGE-108S
€5.99 *
currently 5x in stock
NEW
Ruddog Products 0811 - RP543 - 540 Sensored Brushless Motor - Modified - 4.0T Ruddog Products 0811 - RP543 - 540 Sensored Brushless Motor - Modified - 4.0T
Building on the successful RP542 platform, the RP543 has been further developed to deliver maximum performance, efficiency, and control on the track. A newly designed stator improves the power delivery and response, while the high-precision sensor unit ensures accurate throttle control and smooth operation. Special attention was given to reducing operating temperatures....
€89.99 *
currently 1x in stock
NEW
Ruddog Products 0812 - RP543 - 540 Sensored Brushless Motor - Modified - 4.5T Ruddog Products 0812 - RP543 - 540 Sensored Brushless Motor - Modified - 4.5T
Building on the successful RP542 platform, the RP543 has been further developed to deliver maximum performance, efficiency, and control on the track. A newly designed stator improves the power delivery and response, while the high-precision sensor unit ensures accurate throttle control and smooth operation. Special attention was given to reducing operating temperatures....
€89.99 *
currently 1x in stock
NEW
Ruddog Products 0813 - RP543 - 540 Sensored Brushless Motor - Modified - 5.0T Ruddog Products 0813 - RP543 - 540 Sensored Brushless Motor - Modified - 5.0T
Building on the successful RP542 platform, the RP543 has been further developed to deliver maximum performance, efficiency, and control on the track. A newly designed stator improves the power delivery and response, while the high-precision sensor unit ensures accurate throttle control and smooth operation. Special attention was given to reducing operating temperatures....
€89.99 *
currently 1x in stock
NEW
Ruddog Products 0814 - RP543 - 540 Sensored Brushless Motor - Modified - 5.5T Ruddog Products 0814 - RP543 - 540 Sensored Brushless Motor - Modified - 5.5T
Building on the successful RP542 platform, the RP543 has been further developed to deliver maximum performance, efficiency, and control on the track. A newly designed stator improves the power delivery and response, while the high-precision sensor unit ensures accurate throttle control and smooth operation. Special attention was given to reducing operating temperatures....
€89.99 *
currently 1x in stock
NEW
Ruddog Products 0815 - RP543 - 540 Sensored Brushless Motor - Modified - 6.0T Ruddog Products 0815 - RP543 - 540 Sensored Brushless Motor - Modified - 6.0T
Building on the successful RP542 platform, the RP543 has been further developed to deliver maximum performance, efficiency, and control on the track. A newly designed stator improves the power delivery and response, while the high-precision sensor unit ensures accurate throttle control and smooth operation. Special attention was given to reducing operating temperatures....
€89.99 *
currently 1x in stock
NEW
Ruddog Products 0816 - RP543 - 540 Sensored Brushless Motor - Modified - 6.5T Ruddog Products 0816 - RP543 - 540 Sensored Brushless Motor - Modified - 6.5T
Building on the successful RP542 platform, the RP543 has been further developed to deliver maximum performance, efficiency, and control on the track. A newly designed stator improves the power delivery and response, while the high-precision sensor unit ensures accurate throttle control and smooth operation. Special attention was given to reducing operating temperatures....
€89.99 *
currently 1x in stock
NEW
Ruddog Products 0817 - RP543 - 540 Sensored Brushless Motor - Modified - 7.5T Ruddog Products 0817 - RP543 - 540 Sensored Brushless Motor - Modified - 7.5T
Building on the successful RP542 platform, the RP543 has been further developed to deliver maximum performance, efficiency, and control on the track. A newly designed stator improves the power delivery and response, while the high-precision sensor unit ensures accurate throttle control and smooth operation. Special attention was given to reducing operating temperatures....
€89.99 *
currently 1x in stock
NEW
Ruddog Products 0818 - RP543 - 540 Sensored Brushless Motor - Modified - 8.5T Ruddog Products 0818 - RP543 - 540 Sensored Brushless Motor - Modified - 8.5T
Building on the successful RP542 platform, the RP543 has been further developed to deliver maximum performance, efficiency, and control on the track. A newly designed stator improves the power delivery and response, while the high-precision sensor unit ensures accurate throttle control and smooth operation. Special attention was given to reducing operating temperatures....
€89.99 *
currently 1x in stock
NEW
Team Associated 80951 - RC8T4 Team Kit - 1:8 Nitro 4WD Offroad Truggy Car Kit - Gearbox Upgrade Team Associated 80951 - RC8T4 Team Kit - 1:8 Nitro 4WD Offroad Truggy Car Kit - Gearbox Upgrade
Gearbox Upgrade! The new upgraded 40/9 ring and pinion are completely re-designed with massive teeth which allow for more tooth engagement and prevent skipping. In addition, the RC8B4 front and rear gearboxes are updated for the tightest possible screw and bearing fit using high stiffness polymer. Team Associated driver Spencer Rivkin used the new parts win the 2024 ROAR...
€719.99 *
currently 1x in stock
NEW
Team Associated 80952 - RC8T4e Team Kit - 1:8 4WD Offroad Truggy Car Kit - Gearbox Upgrade Team Associated 80952 - RC8T4e Team Kit - 1:8 4WD Offroad Truggy Car Kit - Gearbox Upgrade
Gearbox Upgrade! The new upgraded 40/9 ring and pinion are completely re-designed with massive teeth which allow for more tooth engagement and prevent skipping. In addition, the RC8B4 front and rear gearboxes are updated for the tightest possible screw and bearing fit using high stiffness polymer. Team Associated driver Spencer Rivkin used the new parts win the 2024 ROAR...
€685.99 *
currently 1x in stock
NEW
Team Associated 29029 - 15S Nitro Engine - with Rotary Carb and Side Exhaust Team Associated 29029 - 15S Nitro Engine - with Rotary Carb and Side Exhaust
15S Engine w/Rotary Carb and Side Exhaust Power your RC10GT and other vintage nitro platforms with this exclusive Team Associated small block nitro engine supplied by Team Associated with a full line of parts support. This small block engine features a side exhaust, rotary carb and standard threaded crankshaft (non SG Shaft). Features: High Quality ABC Piston / Sleeve...
€169.99 *
currently 3x in stock
NEW
Team Associated 6218 - RC10 - Front Inline Axles (1 pair) Team Associated 6218 - RC10 - Front Inline Axles (1 pair)
Genuine Team Associated parts - the best solution for your Asso car!
€9.99 *
currently 1x in stock
NEW
Hobbywing 30112103 - ETS - Xerun XR10 Stock Spec G2 - 100A Brushless ESC Hobbywing 30112103 - ETS - Xerun XR10 Stock Spec G2 - 100A Brushless ESC
ETS legal for Season 2025/26. The second generation XR10 Stock Spec was specially developed for 1/10 Touring Car and Buggy STOCK classes. Reliable hardware in combination with great software are ideal conditions for tough racing. There are 32 different parameters to individually adapt the controller to the current racing conditions and your own driving style. Those who love...
€109.99 *
NEW
Hobbywing 30401760 - ETS - XERUN V10 G4R - Brushless Motor - 17.5T Hobbywing 30401760 - ETS - XERUN V10 G4R - Brushless Motor - 17.5T
ETS legal for Season 2025/26. The Xerun V10 G4R motor from Hobbywing ensures outstanding performance on the track. With up to 7% more speed and 9% more power, it clearly stands out from comparable motors in the industry. Even compared to its G4 predecessor, the improvement in performance is still 4%, offering an excitingly powerful driving experience in every 1/10 stock...
€109.99 *
currently 5x in stock
NEW
Hobbywing 30401761 - ETS - XERUN V10 G4R - Brushless Motor - 21.5T Hobbywing 30401761 - ETS - XERUN V10 G4R - Brushless Motor - 21.5T
ETS legal for Season 2025/26. The Xerun V10 G4R motor from Hobbywing ensures outstanding performance on the track. With up to 7% more speed and 9% more power, it clearly stands out from comparable motors in the industry. Even compared to its G4 predecessor, the improvement in performance is still 4%, offering an excitingly powerful driving experience in every 1/10 stock...
€109.99 *
currently 7x in stock
NEW
ZooRacing ZR-0020-07 - HYRAX - 1:10 LMH Touring Car Body - 0.7mm REGULAR ZooRacing ZR-0020-07 - HYRAX - 1:10 LMH Touring Car Body - 0.7mm REGULAR
ZooRacing HYRAX – The Ultimate Aerodynamic Racing Machine The New Era of RC Racing – Hypercar Class The Hypercar Class is the latest revolution in RC touring car racing, combining cutting-edge aerodynamics, extreme performance, and hyper-realistic designs. Designed for high-speed competition, these cars feature low-slung, wide-body chassis, optimized for maximum downforce...
€34.99 *
currently 102x in stock
NEW
107a90131a_ml.jpg SANWA 107A90134B - High traction steering pad
High traction steering pad Replacement for 107A90134A
€8.99 *
currently 45x in stock
NEW
Exotek 2281 - Asso MT10/Pro4 - Spur Gear - 54T - 32dp - hardened steel Exotek 2281 - Asso MT10/Pro4 - Spur Gear - 54T - 32dp - hardened steel
No more melted or stripped teeth and will last much longer than the stock plastic spur when running high powered electronics.
€29.99 *
currently 3x in stock
NEW
Exotek 2317 - Losi Mini-B/Mini-T - Locker Spur Gear - 55T - Modul 0.5 Exotek 2317 - Losi Mini-B/Mini-T - Locker Spur Gear - 55T - Modul 0.5
Note- Requires a slotted motor mount for proper mesh. Slipper eliminator direct mount spur gear for use on high traction conditions such as carpet and street racing. The spur gear also has wider teeth (4.5mm total) for increased durability with high powered motors. 100% machined POM spur gear system that weighs only 2.7 grams! The stock parts are 4.3 grams. Simply remove all...
€14.99 *
currently 5x in stock
NEW
Exotek 2300 - F1 ULTRA R4 / R5 - Front Arm - +2mm Exotek 2300 - F1 ULTRA R4 / R5 - Front Arm - +2mm
Wider arms for non-Exotek wheels that have narrower width and wheel bearing off sets. Note 2 mini holes machined into arms for easy identification.
€15.99 *
currently 8x in stock
NEW
Exotek 2308 - F1 ULTRA R5 - Bearing Cams - POM - 0mm (1 pair) Exotek 2308 - F1 ULTRA R5 - Bearing Cams - POM - 0mm (1 pair)
Heavy duty machined POM cam inserts for the F1Ultra series. Thicker ring to help absorb wall hits and 100% machined for exact tolerances and engraved numbers for easy identification.
€12.99 *
currently 8x in stock
NEW
Exotek 2309 - F1 ULTRA R5 - Bearing Cams - POM - 0.5mm (1 pair) Exotek 2309 - F1 ULTRA R5 - Bearing Cams - POM - 0.5mm (1 pair)
Heavy duty machined POM cam inserts for the F1Ultra series. Thicker ring to help absorb wall hits and 100% machined for exact tolerances and engraved numbers for easy identification.
€12.99 *
currently 3x in stock
NEW
Exotek 2310 - F1 ULTRA R5 - Bearing Cams - POM - 1.0mm (1 pair) Exotek 2310 - F1 ULTRA R5 - Bearing Cams - POM - 1.0mm (1 pair)
Heavy duty machined POM cam inserts for the F1Ultra series. Thicker ring to help absorb wall hits and 100% machined for exact tolerances and engraved numbers for easy identification.
€12.99 *
currently 8x in stock
NEW
Exotek 2311 - F1 ULTRA R5 - Bearing Cams - POM - 1.5mm (1 pair) Exotek 2311 - F1 ULTRA R5 - Bearing Cams - POM - 1.5mm (1 pair)
Heavy duty machined POM cam inserts for the F1Ultra series. Thicker ring to help absorb wall hits and 100% machined for exact tolerances and engraved numbers for easy identification.
€12.99 *
currently 3x in stock
NEW
Durango TD709011 - Pivot Ball Bushing (10pcs) Durango TD709011 - Pivot Ball Bushing (10pcs)
Genuine Durango Spares & Optionals!
€7.99 *
currently 1x in stock
PIP-Aero TC235 - 1:10 Touring Car Body - 235mm - 0.5mm PIP-Aero TC235 - 1:10 Touring Car Body - 235mm - 0.5mm
PIP-Aero is a product developed and manufactured entirely in Germany. Design, mold making and production take place in Germany. The implementation is of very high quality and always carried out from the perspective of the absolute thoroughbred racer. Scale: 1:10 Width: approx. 235mm Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing...
€27.99 *
currently 9x in stock
PIP-Aero TC200 - 1:10 Touring Car Body - 200mm - 0.75mm PIP-Aero TC200 - 1:10 Touring Car Body - 200mm - 0.75mm
PIP-Aero is a product developed and manufactured entirely in Germany. Design, mold making and production take place in Germany. The implementation is of very high quality and always carried out from the perspective of the absolute thoroughbred racer. Scale: 1:10 Width: approx. 200mm Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing...
€24.99 *
currently 9x in stock
PIP-Aero GT3 - 1:8 GT Body - WB325 - 0.75mm PIP-Aero GT3 - 1:8 GT Body - WB325 - 0.75mm
PIP-Aero is a product developed and manufactured entirely in Germany. Design, mold making and production take place in Germany. The implementation is of very high quality and always carried out from the perspective of the absolute thoroughbred racer. Scale: 1:8 Width: approx. 310mm Wheelbase: approx. 325mm Scope of delivery: Body Window masking Decal sheet Rear wing...
€38.99 *
currently 10x in stock
PIP-Aero GT3 - 1:8 GT Body - WB325 - 1.0mm PIP-Aero GT3 - 1:8 GT Body - WB325 - 1.0mm
PIP-Aero is a product developed and manufactured entirely in Germany. Design, mold making and production take place in Germany. The implementation is of very high quality and always carried out from the perspective of the absolute thoroughbred racer. Scale: 1:8 Width: approx. 310mm Wheelbase: approx. 325mm Scope of delivery: Body Window masking Decal sheet Rear wing...
€38.99 *
currently 9x in stock
PIP-Aero LMPIP1 - 1:8 Onroad Body - 0.75mm PIP-Aero LMPIP1 - 1:8 Onroad Body - 0.75mm
PIP-Aero is a product developed and manufactured entirely in Germany. Design, mold making and production take place in Germany. The implementation is of very high quality and always carried out from the perspective of the absolute thoroughbred racer. Scale: 1:8 Wheelbase: 300mm (not visible - feel free!) Width: 264mm Scope of delivery: Body Window masking Decal sheet...
€24.99 *
currently 10x in stock
Ehrbar Engineering - EF1 High Downforce Formula Rear Wing - 1:10 F1 - BLACK Ehrbar Engineering - EF1 High Downforce Formula Rear Wing - 1:10 F1 - BLACK
Ehrbar Engineering introduces a rear wing designed for both realistic proportions and improved performance in 1/10 electric F1 cars. While the role of aerodynamics in RC racing continues to be debated, this wing was designed to avoid any compromises between realistic looks and performance for those interested in both. After analyzing a number of commercially available rear...
€21.99 *
currently 17x in stock
BLITZ 60808 - GT5 Zonda - 1:8 GT RallyeGame Body - LIGHTWEIGHT 1.0 - with Type S Rear Wing BLITZ 60808 - GT5 Zonda - 1:8 GT RallyeGame Body - LIGHTWEIGHT 1.0 - with Type S Rear Wing
Scale: 1/8 Wheelbase: ca. 323-328mm Width: ca. 313mm Take care: This is the version with the new Type S rear wing. The pictures with the painted body are showing the regular wing which is not included. You will receive the new one which is shown in the unpainted picture. Unpainted, not cut, including wing, small decal sheet and window masks.
€36.99 *
currently 1x in stock
BLITZ 60809 - GT6 Pista - 1:8 GT RallyeGame Body - REGULAR 1.0 - with Type S Wing BLITZ 60809 - GT6 Pista - 1:8 GT RallyeGame Body - REGULAR 1.0 - with Type S Wing
Scale: 1/8 Wheelbase: ca. 323-328mm Width: ca. 305mm Take care: This is the version with the new Type S rear wing. The pictures with the painted body are showing the regular wing which is not included. You will receive the new one which is shown in the unpainted picture. Unpainted, not cut, including wing, small decal sheet and window masks.
€39.99 *
currently 3x in stock
BLITZ 60809 - GT6 Pista - 1:8 GT RallyeGame Body - LIGHTWEIGHT 0.7 - with Type S Wing BLITZ 60809 - GT6 Pista - 1:8 GT RallyeGame Body - LIGHTWEIGHT 0.7 - with Type S Wing
Scale: 1/8 Wheelbase: ca. 323-328mm Width: ca. 305mm Take care: This is the version with the new Type S rear wing. The pictures with the painted body are showing the regular wing which is not included. You will receive the new one which is shown in the unpainted picture. Unpainted, not cut, including wing, small decal sheet and window masks.
€39.99 *
currently 3x in stock
ARC R800025 - R8.4LCG 25 - 1:8 Onroad Nitro Car Kit ARC R800025 - R8.4LCG 25 - 1:8 Onroad Nitro Car Kit
ARC is making a minor upgrade for the 2025 R8.4 LCG. - New upper deck - New front bumper - New pulleys - New wheel axles - New brake pads - + Other new small parts IMPORTANT: These items are included with the car. You will receive both a standard R8.4 LCG kit and the upgrade parts to the 2025 standard version. What's the difference between R8.4 and R8.4 LCG? - LCG stands...
€749.99 *
currently 1x in stock
Ehrbar Engineering - EF1 High Downforce Formula Front Wing - 1:10 F1 - BLACK Ehrbar Engineering - EF1 High Downforce Formula Front Wing - 1:10 F1 - BLACK
Ehrbar Engineering introduces a front wing designed for both realistic proportions and improved performance in 1/10 electric F1 cars. While the role of aerodynamics in RC racing continues to be debated, this wing was designed to avoid any compromises between realistic looks and performance for those interested in both. After analyzing a number of commercially available front...
€21.99 *
currently 13x in stock
Ehrbar Engineering - EF1 High Downforce Formula Front Wing - 1:10 F1 - WHITE Ehrbar Engineering - EF1 High Downforce Formula Front Wing - 1:10 F1 - WHITE
Ehrbar Engineering introduces a front wing designed for both realistic proportions and improved performance in 1/10 electric F1 cars. While the role of aerodynamics in RC racing continues to be debated, this wing was designed to avoid any compromises between realistic looks and performance for those interested in both. After analyzing a number of commercially available front...
€21.99 *
currently 15x in stock
Team Associated 6042 - RC10 - Team Car Metallic Edition 2025 Kit Team Associated 6042 - RC10 - Team Car Metallic Edition 2025 Kit
On December 5th, 1984 the All-American designed Team Associated RC10 was introduced to the RC world. Being the first to take home the gold in both the ROAR National and IFMAR 2WD World Championships, the RC10 secured its place as a legend in RC car history. This year (2025) marks the 41st anniversary of the RC10 and we are proud to offer this special limited 2025 Metallic...
€419.99 *
currently 1x in stock
1 From 5