The A800RR builds on the success of the A800R platform and focuses on refining the revolution brought by the A800R. Retaining the key features of the A800R - shortened chassis plate for minimal overhang and chassis rub and improved damping characteristics over the MMX platform - the A800RR incorporates several key quality-of-life upgrades. These include the newly designed D4...

The A800RR builds on the success of the A800R platform and focuses on refining the revolution brought by the A800R. Retaining the key features of the A800R - shortened chassis plate for minimal overhang and chassis rub and improved damping characteristics over the MMX platform - the A800RR incorporates several key quality-of-life upgrades. These include the newly designed D4...

Outer Measurements: 230x180x110mm Comes with two dividers, which can be placed to your own liking. Also comes with a tool tray, see pictures.

Measurements: 0,35x35x80mm The set includes three pieces of tape. Extraordinary strength and weather-resistance.

Measurements: 395x345mm Height: 10mm Weight: 700g Comes with a bubble wrap protection bag.

Measurements: 395x275mm Height: 10mm Weight: 500g Comes with a bubble wrap protection bag.

The XeRun Bandit G4R is a specially designed 1/10 outlaw competition motor that impresses with maximum performance, low heat generation, and high efficiency. Thanks to its dual hall sensing design and a modular structure for easy maintenance, this motor offers outstanding performance and durability. Key Features: 15°C cooler than the G4 version under the same power...

Features: Durable materials and extra-hard CNC housing Up to 60,000 RPM! IP67-certified Linear and smooth operation High-precision bearings for durability and smooth running Overheating protection when combined with the MAX8 G2S Technical data: Type: Brushless sensored Pole: 4 KV Ratind: 2500 KV LiPo: 3-4S no-load: 5.0A Outer diameter: 42mm Length: 68mm Shaft diameter: 5mm...

ESC Technical Data: Current: 160A / 1050A Motor Limit: with 4S LiPo: KV with 6S LiPo: KV Motor Size 4278 Input: 3-6S LiPos BEC Output: 6V / 7.4V / 8.4V (switchable) Fan: included Size: ca. 60 x 48 x 40.5mm Weight: ca. 192g Plug: XT90 Motor Technical data: Type: Brushless sensored Pole: 4 KV Ratind: 2500 KV LiPo: 3-4S no-load: 5A Outer diameter: 42mm Length: 68mm Shaft...

The compact SkyRC ITP380 infrared thermometer is used for the safe and contactless measurement of the temperature of special surfaces such as engines, chargers or entire vehicles. Compared to its predecessor, SkyRC relies on a classic TO-46 thermopile sensor. The sensor element, consisting of 116 elements of small thermocouples with an active area of 545 µm diameter on a...

Genuine XRAY parts!

Genuine spare and option parts by XRAY!

Original spare and option parts from XRAY!

Stronger side links that do not flex under load, especially on higher grip tracks for increased consistency through the corners.

Allows for quick and easy front to back battery bias adjustments without the need of the original rear battery stoppers. For use with most 4800-6400 standard and lcg shorty packs. Note 4600 and smaller packs would need 2mm foam spacers on each end.

Put down huge power with our heavy duty hardened steel complete CVD axle sets and diff cups. -Pre-assembled CVD's. -Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping out the stock plastic axle sets. -Increased traction from improved suspension action due to less axle binding (the plastic sliders locks up when on...

Sold as 1 pair of wheels f or use with Exotek F1 tires only. For use on 1/10 pan car style F1's such as by Exotek, Xray and Schumacher etc. Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, we have taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set...

Sold as 1 pair of wheels f or use with Exotek F1 tires only. For use on 1/10 pan car style F1's such as by Exotek, Xray and Schumacher etc. Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, we have taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set...

Genuine Team Associated parts - the best solution for your Asso car!

Genuine Team Associated parts - the best solution for your Asso car!

Genuine Team Associated parts - the best solution for your Asso car!

Genuine Team Associated parts - the best solution for your Asso car!

Genuine spare and option parts from Serpent.

Genuine spare and option parts from Serpent.

Genuine spare and option parts by Serpent! Replacement for Serpent 903397.

Genuine spare and option parts by Serpent!

Genuine spare and option parts by Serpent!

These precision-machined pivot balls replace the standard steel versions and help reduce front-end weight significantly – each ball weighs just 0.21 g . In addition to saving weight, the tighter manufacturing tolerances of the aluminium balls reduce play in the caster block and steering knuckle area. The result is improved steering precision, more direct response, and a...

Based on the proven RDRP design philosophy, these caster blocks are machined from aircraft-grade 7075-T6 aluminium to provide the perfect balance of reduced unsprung weight and maximum strength. The 7° caster angle, used by most XRAY drivers, gives the car more initial steering. This makes the car more predictable and the overall steering response more stable. The black...

Made from high-quality 7075-T6 aluminium, these rear hubs replace the standard composite parts to provide greatly improved durability and a more precise handling experience — especially under high-stress racing conditions. The increased stiffness of the aluminium design keeps the suspension geometry stable even under heavy loads, resulting in a more consistent and...

CNC-machined from strong 7075-T6 aluminium, it delivers superior rigidity and accurate steering response. The black anodized finish, silver chamfered edges, and laser-etched branding give it a premium factory appearance. Its standout feature is the adjustable linkage length from 15 to 19 mm , allowing fine-tuning of steering response to suit different track conditions or...

Manufactured from high-quality, low-friction material, this white belt ensures smooth and efficient power delivery while offering excellent durability and low wear over time. Measuring 351 mm in length and 3 mm in width, it is designed to fit most popular mid-motor, dual-belt 1/10 touring cars – including platforms such as the Awesomatix A800R , Xray X4 , Mugen MTX3 ,...

The 2mm carbon fiber plate is both lightweight and extremely durable. Its rigid design ensures precise front wing support and improved durability during hard landings or impacts. In addition to the performance benefits, the carbon fiber plate also gives your car a sleek, professional appearance. Features: Lightweight and high rigidity Increased durability during jumps and...

Made from 2mm high-quality carbon fiber, this wing plate combines lightweight construction with excellent rigidity. Its durable design offers increased crash resistance and helps maintain consistent wing alignment during high-speed runs and rough landings. Besides the functional benefits, the carbon plate also adds a clean, professional look to your 1/8 scale buggy or...

Pit Mat - 110x50cm

Made from high-quality CNC-machined aluminium and finished in durable black anodizing, this organiser is designed to work perfectly with 12 to 14 AWG motor wires commonly used in 1/10-scale vehicles. Whether you're aiming for a cleaner look or simply want to avoid tangled wires, the RUDDOG Wire Organiser is a must-have addition to your electronics setup. Features: • Keeps...

Original spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine Mugen spare parts! Replacement for A2160

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine Mugen Spare & Option Parts :-) Replacement for C0801Ha

Genuine Mugen Spare & Option Parts :-) Replacement for E0601

Genuine Mugen Spare & Option Parts :-) Replacement for E2805

Mugen Original Spare Parts Replacement for T2805 Will replace the item H0867

Perfect fit for Tamiya 4WD Buggies like TT-02B. Possible to be used also with DT-04 (2WD Buggy) cause of its 12mm hex hub on both axles. It's not a high competition tire set. It's a cheap - but still good - solution to go through the dirt. It's made for dirt and street at the same time. Scale: 1/10 Diameter: xx mm Tire width front: xx mm Tire width frear: xx mm Hub front:...

The compact SkyRC ITP380 infrared thermometer is used for the safe and contactless measurement of the temperature of special surfaces such as engines, chargers or entire vehicles. Compared to its predecessor, SkyRC relies on a classic TO-46 thermopile sensor. The sensor element, consisting of 116 elements of small thermocouples with an active area of 545 µm diameter on a...