RadioLink 1RL0110 - RC6GS V2 -2.4GHz Radio - incl. R6F Receiver

7-channel computer RC steering wheel set Radiolink with FHSS 2.4GHz telemetry transmission system for recreational models of cars and ships. With the R7FG FHSS receiver included in the set (with built-in gyro) you have 7 PWM channels for classic servos without telemetry. The RC6GS V3 transmitter can also be used with the R6F or R6FG receiver with built-in gyro or R8EF and R8FM flight receivers (primarily designed for the T8FB and T8S transmitters). The range of the RC set is up to 400 m, so you don't have to worry about taking your ship into larger waters. With the upcoming R8F/R8FG telemetry receivers, telemetry transmission is enabled and the supply voltage of the receiver and the signal strength received by the receiver are shown on the transmitter display.

The RC6GS V3 transmitter in a classic steering wheel design with a comfortable grip is equipped with a steering wheel control, a throttle lever, rotary knob for channel 3, three digital trims around the steering wheel (for channels 1-3), two three-position switches and two button switches. Programming is done via four buttons. An LCD display allows easy navigation through the intuitive menu. The RC6GS V3 transmitter has a memory for 30 models and a variety of programming functions, including two freely programmable mixers that make it easy to set up common and special car models (e.g. steerable front and rear wheels for crawlers, tracked vehicles, two-shaft ships, etc.).

To start using the transmitter, you need 6 AA alkaline batteries or NiMH rechargeable batteries, which are housed in a holder in the transmitter.

FEATURES

FHSS 2.4GHz transmission system for RC cars
6 proportional channels (channels 1 and 2 with controllers, channels 3 to 7 with freely assignable controllers or switches)
Steering wheel control
Throttle control trigger
Channel 3 rotary knob (button switches can also be assigned)
3 digital trims (steer, throttle, channel 3)
2 three-position switches above the steering wheel (can be assigned to turn on mixers and as channel controllers)
2 button switches on the handle (can be assigned to turn on mixers and as channel controllers)
Program functions

Memory for 10 models (configurable name with 7 characters)
Setting the deflection size for all channels
Reverse for all channels
Subtrim for all channels
Expo of the deflection size
Throttle curve (for forward travel: smooth exponential curve, dashed line or 5-point curve; for brake/reverse: smooth Exponential curve)
Speed ​​of the steering and throttle servos
Dual rate deflections
Fail-safe for all channels
Controller selection for channels 3 to 7
ABS
Safe idle
Throttle acceleration
Two freely programmable mixers with the arbitrary assignment of the control channel and the controlled channel (e.g. B. for controlling the second steering servo, the dual-circuit brakes, tanks and other tracked vehicles, two-shaft ships, etc.)
Status display of the transmitter batteries/rechargeable batteries on the display with adjustable threshold voltage for warning signaling
Gyro remote control
With telemetry receiver: Display of the receiver's supply voltage and signal strength on the display with adjustable threshold voltage for warning signaling
ID SEED: Special functions especially for ship models - if the ship loses course (e.g. due to defects in the ship's propeller) or capsizes, you can switch to another model in the transmitter's memory, with which you can push the "affected" model to the shore (while the "affected" model does not respond to the movements of the controller).
Compatible receivers

Radiolink R6F (6-channel receiver for RC cars)

Radiolink R6FG (6-channel receiver with gyro for RC cars)

Radiolink R8EF (8-channel receiver for general use)

Radiolink R8FM (miniature 8-channel S.BUS/PPM receiver for general use)

Radiolink R8F (8-channel receiver for RC cars)

Radiolink R8FG (8-channel receiver with gyro for RC cars)

RC KIT INCLUDES

Transmitter Radiolink RC6GS V3 2.4GHz
Receiver R6F
Strap
Instruction manual