RadioLink 1RL0100 - RC4GS V3 -2.4GHz Radio - incl. R6F Receiver

5-channel computer RC steering wheel set Radiolink with FHSS 2.4GHz telemetry transmission system for recreational models of cars and ships. With the R6F FHSS receiver included in the set, you have 5 PWM channels for classic servos without telemetry. The RC4GS V3 transmitter can also be used with the R6FG receiver with built-in gyro or the R8EF and R8FM flight receivers (primarily designed for the T8FB and T8S transmitters). The range of the RC set is up to 400 m, so you don't have to worry about taking your ship into larger waters. With the upcoming R7FG telemetry receivers, telemetry transmission is enabled and the supply voltage of the receiver and the signal strength received by the receiver are displayed on the transmitter display.

The RC4GS V3 transmitter in the classic steering wheel design with a comfortable handle is equipped with a steering wheel control, a throttle lever, rotary knob for channel 3, three digital trims around the steering wheel (for channels 1-3) and two button switches. Programming is done via four buttons. An LCD display allows easy navigation through the intuitive menu. The RC4GS V3 transmitter has a memory for 30 models and a variety of programming functions, including two freely programmable mixers that make it easy to set up common and special car models (e.g. steerable front and rear wheels for crawlers, tracked vehicles, two-shaft ships, etc.).

To start using the transmitter, you need 6 AA alkaline batteries or NiMH rechargeable batteries, which are housed in a holder in the transmitter.

FUNCTIONS

FHSS 2.4GHz transmission system for RC cars
4 proportional channels (channels 1 and 2 with controllers, channels 3 to 5 with freely assignable controllers or switches)
Steering wheel control
Throttle control trigger
Rotary knob for channel 3 (button switches can also be assigned)
3 digital trims (steer, throttle, channel 3)
2 button switches on the handle (can be assigned to turn on mixers and as channel controllers)
Program functions

Memory for 30 models (configurable name with 7 characters)
Setting the deflection size for all channels
Reversal for all channels
Subtrim for all channels
Expo of the deflection size
Throttle curve (for forward travel: smooth exponential curve, dashed line or 5-point curve; for brake/reverse: smooth exponential curve)
Speed ​​of the steering and throttle servos (depending on the position of the throttle stick two different delay values ​​for throttle can be switched)
Dual rate deflections
Fail-safe for all channels
Controller selection for channels 3 to 5
ABS
Throttle acceleration
Safe idle
Throttle shut-off/engine shutdown
Two freely programmable mixers with the arbitrary assignment of the control channel and the controlled channel (e.g. B. for controlling the second steering servo, the dual-circuit brakes, tanks and other tracked vehicles, two-shaft ships, etc.)
Status display of the transmitter batteries/rechargeable batteries on the display with adjustable threshold voltage for warning signaling
Gyro remote control
Timer with selectable stopwatch mode (time up) or timer mode (time down) and time measurement up to 30 laps, measured times are saved and can be called up later)
With telemetry receiver: Display of the receiver's supply voltage and signal strength on the display with adjustable threshold voltage for warning signaling
ID SEED: Special functions especially for ship models - if the ship loses course (e.g. due to defects in the ship's propeller) or capsizes, you can switch to another model in the transmitter's memory with which you can push the "affected" model to the shore (while the "affected" model does not respond to the movements of the controller).
Compatible receivers

Radiolink R6F (6-channel receiver for RC cars)

Radiolink R6FG (6-channel receiver with gyro for RC cars)

Radiolink R8EF (8-channel receiver for general use)

Radiolink R8FM (miniature 8-channel receiver S.BUS/PPM)

Radiolink R7F (7-channel telemetry receiver for RC cars)

Radiolink R7FG (7-channel telemetry receiver with gyro for RC cars)

RC SET INCLUDES

Transmitter Radiolink RC4GS V3 2.4GHz
Receiver R6F
Instruction manual