Exotek

NEW

Exotek 2288 - P-ZERO R GT Body 190mm 1/10

Pzero R USGT approved! The legendary multi national winning body has now been optimized for todays ultra low profile touring car suspensions. New 1/10 Italian super car modeled GT body with 194mm width allows you to run wider suspension...

€38.99 *

currently 29x in stock

Remember

Exotek 1967 - F1 ULTRA R4 / R5 - HD LiPo Cup, Carbon Fiber and Alloy

Glossy carbon fiber construction with alloy posts for extra secure lipo mounting.

€19.99 *

currently 1x in stock

Remember

Exotek 2283 - F1 ULTRA R4 / R5 - Heavy Duty Racing Servo Saver Set - 1/10 scale - for 25 Spline...

Designed for excellent servo protection but returns to center perfectly after impacts thanks to the heavy gauge steel springs and fiber reinforced nylon construction which also provides precise steering control. Designed with narrower...

€14.99 *

currently 25x in stock

Remember

Exotek 2296 - Asso B7 - Carbon Fiber Battery Brace Set

Matches the stock geometry for a perfect fit of 4800-6400 shorty packs. Installs using the stock hardware and instructions as well.

€18.99 *

currently 10x in stock

Remember

EXOTEK 2280 - F1 ULTRA R5 / PanCar - HD Diff Gear 48dp 64T

Heavy duty spur gear for pan cars and F1's that use 1/8" diff balls. All machined delrin gear for ultimate roundness and flatness and much stronger and longer lasting than 64 pitch gears. Designed with maximum hole cuts allowing the use...

€12.99 *

currently 26x in stock

Remember

EXOTEK - F1 ULTRA R5 CARPET WORKS - 1/10 2WD Formula Competition Car Kit

Lighter, leaner and meaner. The F1ULTRA R5 CW is a cutting edge high-performance F1 racing kit that evolves all of the great features of original F1Ultra into a perfected race machine designed specifically for carpet tracks. Some of the...

€459.99 *

currently 3x in stock

Remember

Exotek 2282 - Traxxas Slash - Rear HD Steel CVD Axle Set 76mm - V3 - 2.5mm Pins

For the Traxxas Modified, SLASH 4x4 (REAR) or SLASH 2wd (NOT Drag Slash, Rally, Bandit, etc). New 1/8 scale style ver.3 set with larger cva couplers and larger 2.5mm pin. Put down huge power with our heavy duty hardened steel complete...

€39.99 *

currently 2x in stock

Remember

Exotek 2274 - Asso Reflex 14 - HD Spur Gear 58T - Steel

Heavy duty hardened steel spur gear for the Associated Reflex 14 line. No more melted or stripped teeth and will last much longer than the stock plastic spur when running high powered electronics.

€19.99 *

currently 3x in stock

Remember

Exotek R4521 - F1 ULTRA R4 / R5 - Alu Caster Posts - 33mm (2 pcs)

Genuine spare part for your F1 ULTRA!

€9.99 *

currently 7x in stock

Remember

Exotek 2275 - Arrma Typhon / Granite Grom - Steering Hub - Alloy 7075 - red (1 pair)

Heavy duty, precision machined alloy steering hub set for the Arrma Typhon GROM and Granite GROM (Not for the Mojave Grom or Nascar). Machined bearing pockets insures smooth and accurate bearing fit and the hubs matches the stock...

€24.99 *

currently 1x in stock

Remember

Exotek 2275 - Arrma Typhon / Granite / Mojave Grom - Rear Hub - Alloy 7075 - red (1 pair)

Heavy duty, precision machined alloy rear hub set for the Arrma Typhon GROM, Granite GROM, Mojave GROM and Losi Nascar. Machined bearing pockets insures smooth and accurate bearing fit and the hubs matches the stock geometry for easy...

€24.99 *

currently 1x in stock

Remember

EXOTEK R4518 - F1 ULTRA R4 / R5 - Micro Shock Spring Set (3x 2 pcs)

Genuine spare part for your F1 ULTRA!

€13.99 *

currently 2x in stock

Remember

Exotek 2271 - Asso MT10/Pro4 SC10 - HD Motor cooling plate set - stainless steel - set

Extra stiff stainless steel construction insures proper gear mesh when jumping and bashing and adds an extra mounting screw that greatly reduces motor plate flexing as well. Designed with extra cooling fins to keep your motor running...

€38.99 *

currently 1x in stock

Remember

Exotek 2273 - Exotek/Asso/XRAY/Mugen/Losi/Tekno - Clamping servo horn - 25 T - Alu 7075 - blue

Heavy duty clamping servo horn designed for extra holding power in many off road cars and trucks. The clamping screw design insures a perfect and tight fit on 25 spline servos such as Futaba and Protek. Check the attached graphic to...

€16.99 *

currently 10x in stock

Remember

Exotek - XRAY XB2 - Alu Radträger hinten - SCHWARZ (1 Stück) - Ersatz für 1656

€9.99 *

previously €39.99*

currently 1x in stock

Remember

Exotek 2258 - Mugen MSB1 - Locked Spur Mount Set with titanium bolt

New super light alloy locked spur mount with titanium center bolt for our lightest spur locker yet. Excellent for stock buggy racing to reduce rotating mass and a lower cg. The complete set with optional spur gear shown weighs 9gr- the...

€29.99 *

currently 5x in stock

Remember

Exotek 2259 - Mugen MSB1 - Top Shaft Screw - Titanium

Almost half the weight of the stock screw at 2.4gr (stock is 4.3gr), this titanium screw lightens your rotating mass and lowers your CG. Direct fit on the stock laydown top shaft and slipper.

€15.99 *

currently 3x in stock

Remember

Exotek 2262 - Pro Tire and Wheel Balancer Set - fits 12mm/14mm hex and 10mm bearing

Hand held tire and wheel balancing tool set designed to easily balance your tires for optimal handling. Works with many types of cars and trucks that have 12mm hexes (off road and on road), 14mm hexes (1/10 F1) and 10mm bearing front...

€44.99 *

currently 2x in stock

Remember

Exotek 2264 - Traxxas 2WD - Drag Steel CVA axle set - V3

New 1/8 scale style ver.3 set with larger cva couplers and larger 2.5mm pin. For the Traxxas DRAG SLASH. Also compatible with Traxxas kits using 2wd 2750R arms (2wd Bandit). Put down huge power with our heavy duty hardened steel complete...

€39.99 *

currently 1x in stock

Remember

Exotek 2266 - Asso MT10/Pro4 SC10 - HD Steering Set - 7075 alloy

The ultimate heavy duty pro style steering set for the Associated MT10 and PRO4 SC10 series . Includes left crank, right crank, drag link, 4 bearings, chassis spacer screws and hardware. Robustly designed and engineered to have the most...

€59.99 *

currently 1x in stock

Remember

Exotek 2267 - Asso MT10/Pro4 SC10 - HD Steering Hubs - 7075 alloy

Factory style heavy duty alloy steering hubs for the Associated MT10 and PRO4 SC10 series. Polished blue finish with heavy duty construction for smooth and precise steering operation. Also has machined bearing pockets for super precise...

€37.99 *

currently 1x in stock

Remember

Exotek 2268 - Asso MT10/Pro4 SC10 - HD Caster Hubs - 7075 alloy (1 pair)

Factory style heavy duty alloy caster hubs for the Associated MT10 and PRO4 SC10 series. Polished blue finish with heavy duty construction for smooth and precise suspension and steering operation. Always use blue thread lock and do not...

€37.99 *

currently 1x in stock

Remember

Exotek 2269 - Asso MT10/Pro4 SC10 - HD Rear Hubs - 7075 alloy (1 pair)

Factory style heavy duty alloy rear hubs for the Associated MT10 and PRO4 SC10 series. Polished blue finish with heavy duty construction for smooth and precise suspension operation. Also has machined bearing pockets for super precise...

€37.99 *

currently 1x in stock

Remember

Exotek 2270 - Asso MT10/Pro4 SC10 - HD Wheel Hex set - alloy (4 pcs)

Factory fast heavy duty alloy hex hub set for the Associated MT10 and PRO4 SC10 series. Polished blue finish with heavy duty construction for smooth and precise wheel fit. These stronger alloy hex sets provide more secure wheel...

€29.99 *

currently 1x in stock

Remember

Exotek 2256 - F1 ULTRA R4 / R5 - Heavy Duty Racing Servo Horn - Alu 7075 - 25T

Heavy duty 7075 alloy clamped racing servo horn. Perfect fit and geometry for robust steering and performance. Check our dimensions above for compatibility. Large M2.5 clamping screw included. For Futaba and all other 25 spline servos.

€16.99 *

Remember

Exotek R4520 - F1 ULTRA R5 - Nylon Rear Diffuser

Rear diffuser that provides extra downforce and rear traction. All 3d printed nylon construction and weighs 10grams. Direct fit for the Exotek F1 Ultra R5 only. Do not over tighten screws or you may damage the diffuser- simply use blue...

€16.99 *

currently 14x in stock

Remember

Exotek 2217 - Asso B74.2 - Battery Mounting Tab Set - for shorty and LCG shorty

Lightweight battery mounting tabs with adjustable alloy post set. Super secure and modular too- allows easy adjustment for forward or back battery positioning to tune your weight balance and also works with LCG shorty packs or standard...

€33.99 *

currently 4x in stock

Remember

Exotek 2265 - F1 ULTRA R4 / R5 - Front Copper Spring Set - firm

New specially developed firmer front springs for black carpet racing. Includes; 2265 FIRM FRONT SPRING SET R4505 LARGE GRAB CLIP R4101 M3 THIN WASHER

€6.99 *

currently 11x in stock

Remember

Exotek 2263 - Asso B7 - Flite Direct Spur Mount Shaft Set - Alu 7075 - extra lightweight

In the world of ultra competitive stock racing on high grip tracks, every gram counts and there is no better way to separate yourself from the pack than having a more efficient and lighter drive train. Maintains the stock gear teeth...

€33.99 *

currently 9x in stock

Remember

EXOTEK R4061 - F1 ULTRA R4 / R5 - Alu Ball Ends - V2 (6 pcs)

Genuine spare part for your F1 ULTRA! New v2 balls with tighter fitting tolerance. New silver grey color.

€15.99 *

currently 9x in stock

Remember

Exotek 2252 - F1 - 1/10 Rubber Tires - Rear - 22X - Carpet - Hyper Soft (1 pair)

New hyper soft 22x compound with newly designed carpet foam insert are suited for carpet racing. Not suited for asphalt due to possible over heating. Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk...

€24.99 *

currently 8x in stock

Remember

Exotek 2255 - F1 ULTRA R4 / R5 - 5.8mm Alloy Suspension Ball with Cup

Heavy duty alloy pivot cup for Exotek kits such as the Vader and F1Ultra. Replaces the stock nylon cup and uses the stock C-clip. To install the alloy ball press the ball through the slotted side of the cup. Alternative for Exotek 2248...

€9.99 *

currently 21x in stock

Remember

Exotek 2238 - Tamiya BBX BB-01 - HD Gear Box - Aluminum

The heavy duty gearbox delivers extra durability and precision gear mesh and alignment- the alloy construction insures the drive shaft gear maintains 100% teeth engagement against the diff gear to eliminate the problem of worn gear teeth...

€59.99 *

currently 2x in stock

Remember

Exotek 2244 - Asso B7 - HD Arm Mount D - black/blue

Updated design adds more support material on the back side for increased durability over the stock mounts.

€18.99 *

currently 8x in stock

Remember

Exotek 2246 - Asso B7 - HD Servo Mount - black/blue

Heavy duty design that is machined to be lightweight at only 7gr each. Also designed with a 1mm wider opening for easier servo installation.

€19.99 *

currently 6x in stock

Remember

EXOTEK R4505 - F1 ULTRA R4 / R5 - Front Spring Set - SOFT - replacement for R4087

Genuine spare part for your F1 ULTRA!

€5.99 *

currently 12x in stock

Remember

Exotek 2248 - F1 ULTRA R4 / R5 - 5.8mm POM Suspension Ball with Cup

Offers lower friction than the alloy ball for the smoothest steering pin movement and suspension action. Insert the ball into the cup from the narrow end of the cup.

€5.99 *

currently 15x in stock

Remember

Exotek 2249 - F1 ULTRA R4 / R5 - Carpet Shock Tower - Wide

Wider shock mount geometry provides less chassis roll to maximize performance on high grip carpet tracks.

€14.99 *

currently 10x in stock

Remember

Exotek 2250 - F1 ULTRA R5 - Carpet Wing Mount Carbon Fibre

Lowered mounting and less flex, best suited for high grip carpet tracks. Not for older F1 Ultras.

€18.99 *

currently 10x in stock

Remember

Exotek 2251 - F1 ULTRA R5 - Carpet Inline Strap CF

Provides more steering for high grip black carpet tracks. For use with LCG shorty packs (20mm or lower) and smaller ESC's such as the Hobbywing XR10 Stock Spec.

€19.99 *

currently 5x in stock

Remember

Exotek 2253 - Losi 22S - HD Front Spindle Hub Set - black/silver (1 pair)

Polished black and silver finish with heavy duty construction for smooth and precise steering operation. Always use blue thread lock and do not over tighten screws.

€40.99 *

currently 10x in stock

Remember

Exotek 2254 - Losi 22S - HD Caster Block Set - black/silver (1 pair)

Polished black and silver finish with heavy duty construction for smooth and precise steering operation. Always use blue thread lock and do not over tighten screws.

€40.99 *

currently 10x in stock

Remember

Exotek 1678LBL - FLITE WING BUTTONS, 16MM (2 pieces) LIGHT BLUE

FLITE WING BUTTONS, 16MM (2 pieces) LIGHT BLUE Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing and touring cars. Large 16mm diameter to securely hold your wing while offering protection from crashes. Requires...

€8.99 *

currently 2x in stock

Remember

Exotek 2225 - Asso B7 - Top Shaft Screw - Titanium Slipper Screw

About half the weight of the stock screw at 2gr, this titanium screw lightens your rotating mass and lowers your CG. Direct fit on the stock laydown top shaft and slipper. Allows the use of a 2mm hex wrench on the slipper side to hold...

€15.99 *

currently 6x in stock

Remember

Exotek 2240 - Asso B7 - HD Steering Rack - 2 colour

Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts. And the alloy construction insures precise steering input and heavy duty long lasting performance. And for...

€19.99 *

currently 1x in stock

Remember

Exotek 2241 - Asso B7 - HD Steering Cranks - 2 colour (1 pair)

Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts. And the alloy construction insures precise steering input and heavy duty long lasting performance. And for...

€31.99 *

currently 1x in stock

Remember

Exotek 2242 - Asso B7 - Slipper Perchs - Titanium (1 pair)

Over half the weight of the stock steel perch at 1.2gr, this set lightens your rotating mass and lowers your CG. Direct fit on the stock laydown top shaft and slipper and hardware.

€15.99 *

currently 6x in stock

Remember

Exotek 2243 - Asso B7 - HD Arm Mount C - 2 colour

Updated design removes the side notches that can break or bend on the stock mounts. Customized polished black base with blue chamfered accents.

€18.99 *

currently 2x in stock

Remember

Exotek 2247 - Asso B7 - HD Front Axles - Titanium (1 pair)

At only 4.1 grams per pair these axles are stronger than the stock aluminum axles while still being lightweight. Rounded and angled hex profile also makes wheel installation extra quick and easy.

€29.99 *

currently 2x in stock

Remember

Exotek 2222 - Traxxas Drag Slash - Front Bumper Set with GNSS Slot - V3

Add protection to your Traxxas Drag Slash and 2wd Slash based oval cars with our heavy duty alloy, carbon fiber and foam bumper set. Allows for optional mounting of SkyRC GNSS gps modules safely protected inside of the foam bumper and...

€39.99 *

currently 3x in stock

Remember