Products from T-Work's
Verantwortlicher nach GPSR – person responsible GPSR:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
Hersteller – manufacturer:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
No results were found for the filter!
T-Work's TT-043 - Anti Tweak Block - 20mm - Mugen MTC-1 and Infinitiy IF14 - BLACK
Place it between your bulkheads to make sure to have always straight bulks without any tweak. Suitable for cars with 20mm gap between the bulkheads. For example: Mugen MTC-1 Infinity IF14 ...and many more. Check your gap!
€15.99
*
currently 3x in stock
T-Work's TT-046 - Alu Shock Stand
Suitable for 1/10 on-road/off-road, 1/8 on-road/GT/off-road. Description: After fold in smaller size,easy to pack. Bottom with carbon fiber balance plate, turn out the balance plate can increase holder stability. Each holder with 2...
€54.99
*
currently 5x in stock
T-Work's TT-050BK - Anti Tweak Block - 18mm / 19mm - BD9 and T4 - BLACK
Place it between your bulkheads to make sure to have always straight bulks without any tweak. Suitable for cars with 18mm or 19mm gap between the bulkheads.
€16.99
*
currently 5x in stock
T-Work's TT-052-S - Universal Cleaning Case - for Ball Bearings and Small Parts - KLEIN
This Universal Cleaning Case helps to remove dust and dirt of the bearings/screws/small parts with hassle-free. Simply put the bearings/screws/small parts inside the cleaning case, add cleaners and shake the case until dust/dirt is being...
€13.99
*
currently 16x in stock
T-Work's TT-053 - Turnbuckle Duo/Purpose Adjustment Tool - 4mm + 2mm Pin - for Mugen MTC-1
Turnbuckle Duo- purpose Adjustment Tool T-Work's has a new product to aid in adjusting your Turnbuckles. The tool has a 2mm extended bit to allow easier adjusting for turnbuckles with hole. In addition, it comes with a 4mm turnbuckle...
€10.99
*
currently 5x in stock
T-Work's TT-057-T - Glow Plug Magnifier Tool for Turbo Glow Plug
T-Work's is pleased to introduce the Glow Plug Magnifier tool. The tool allows you to check the inner coil condition of the glow plug at 50x magnification; giving you a good gauge when it's time for replacement. The tool comes in...
€32.99
*
currently 1x in stock
T-Work's TT-059-H2.0 - L-Type Allen Wrench - 2.0mm
L-Type hex wrench.
€10.99
*
currently 5x in stock
T-Work's TT-059-H2.5 - L-Type Allen Wrench - 2.5mm
L-Type hex wrench.
€10.99
*
currently 6x in stock
T-Work's TT-059-H3.0 - L-Type Allen Wrench - 3.0mm
L-Type hex wrench.
€10.99
*
currently 5x in stock
T-Work's TT-059-H5.5 - L-Type 5.5mm Socket Driver 5.5mm
5.5mm - L-Type socket driver.
€13.99
*
currently 8x in stock
T-Work's TT-063 - Bearing Checker and Measuring Tool - 2-15mm
For bearings with 2-15mm inner diameter. Including 1/8 and 1/4 bearings.
€21.99
*
currently 15x in stock
T-Work's TT-064 - Tire Sanding Tool - 12 and 17mm Hex
Suitable for 1/10 (12mm hex) and 1/8 (17mm hex) wheels.
€29.99
*
currently 15x in stock
T-Work's TT-065 - Driveshaft Correcting Tool
The length of this product is 50mm, which is suitable for the transmission shaft with a length of more than 50mm.
€43.99
*
currently 1x in stock
T-Work's TT-065S - Driveshaft Correcting Tool - for 1/10 Onroad
The length of this product is 31.5mm, which is suitable for the transmission shaft with a length of more than 31.5mm.
€43.99
*
currently 8x in stock
T-Work's TT-066 - Onroad Clutch Spring Adjust Tool
Made for onroad clutch - 1/8 and 1/10.
€16.99
*
currently 1x in stock
T-Work's TT-069 - 2in1 Tool - 5.5mm + 7.0mm Socket Driver
One driver - two sizes!
€31.99
*
currently 5x in stock
T-Work's TT-074BK - Anti Tweak Block - 16mm / 17mm - T4 2020 - BLACK
Place it between your bulkheads to make sure to have always straight bulks without any tweak. Suitable for cars with 16mm or 17mm gap between the bulkheads.
€16.99
*
currently 1x in stock
T-Work's TT-077 - Brush Set Soft Brittle (3 brushs)
Big Brush: Length: 205 mm Width: 50.8mm (2") Middle Brush: Length: 200mm Width: 38.1mm (1,5") Small Brush: Length: 195 mm Width: 25.4mm (1")
€10.99
*
currently 8x in stock
T-Work's TT-077-L - Brush Large - Soft Brittle
Big Brush: Length: 205 mm Width: 50.8mm (2")
€5.99
*
currently 8x in stock
T-Work's TT-077-M - Brush Medium - Soft Brittle
Middle Brush: Length: 200mm Width: 38.1mm (1,5")
€5.99
*
currently 9x in stock
T-Work's TT-077-S - Brush Small - Soft Brittle
Small Brush: Length: 195 mm Width: 25.4mm (1")
€5.99
*
currently 5x in stock
T-Work's TT-079 - Multi-Function Hex Tool Kit - 1.5 + 2.0 + 2.5 + 3.0mm Hex
Powertool insert - 1/4 inches, 6.35mm
€32.99
*
currently 5x in stock
T-Work's TT-079-1.5 - Power Tool Hex Tip - 1.5mm
Powertool insert - 1/4 inches, 6.35mm
€9.99
*
currently 5x in stock
T-Work's TT-079-2.5 - Power Tool Hex Tip - 2.5mm
Powertool insert - 1/4 inches, 6.35mm
€9.99
*
currently 9x in stock
T-Work's TT-079-3.0 - Power Tool Hex Tip - 3.0mm
Powertool insert - 1/4 inches, 6.35mm
€9.99
*
currently 8x in stock
T-Work's TT-081 - Multi-Function Hex Tool Kit - 1.5 + 2.0 + 2.5 + 3.0mm Hex
Handle + 4x powertool insert
€43.99
*
currently 4x in stock
T-Work's TT-082 - Hex Driver Power Tool Holder
Suitable for 1/4 inch (6.35mm) bits.
€14.99
*
currently 3x in stock
T-Work's TT-084 - Glowplug Tool - Nut Wrench - 8mm / 10mm + 5mm hex
5mm hex, 8mm nut and 10mm nut - all in one tool.
€17.99
*
currently 1x in stock
T-Work's TT-085-2.5 - L-Type Allen Wrench - 2.5mm
L-Type hex wrench. Take care: It's very small - only 90mm total length.
€10.99
*
currently 9x in stock
T-Work's TT-086-S - Multi-Function Hex Tool Kit - 1.5 + 2.0 + 2.5 + 3.0mm Hex
Handle + 4x insert
€21.99
*
currently 2x in stock
T-Work's TT-087-5.5 - Power Tool Nut Driver Tip - 5.5mm
Powertool insert - 1/4 inches, 6.35mm
€10.99
*
currently 1x in stock
T-Work's TT-087-7.0 - Power Tool Nut Driver Tip - 7.0mm
Powertool insert - 1/4 inches, 6.35mm
€10.99
*
currently 3x in stock
T-Work's TT-088 - Multi-Tool - 1/8 Offroad / Onroad / GT - Nitro / Electric
T-Work's Multi-Purpose Wrench Includes: - Handle - 8mm/10mm Nut Driver - 7075-T6 Hard Coated 17mm nut driver - 7075-T6 Hard Coated 17mm extra long nut driver
€54.99
*
currently 9x in stock
T-Work's TT-090-L - Multi-Tool - Flywheel and Wheel Nut - 17mm - long for 1:8 Truggy
Short version - for truggy wheels. Will also work for buggies.
€21.99
*
currently 17x in stock
T-Work's TT-090-S - Multi-Tool - Flywheel and Wheel Nut - 17mm - short for 1:8 Buggy
Short version - for buggy wheels.
€21.99
*
currently 1x in stock
T-Work's TT-066 - Offroad Buggy Clutch Spring Adjust Tool
Made for offroad clutch - 1/8.
€16.99
*
currently 1x in stock
T-Work's TT-094 - Chassis Balancing Tools - Alu - BLACK
You want to have your car well balanced? Just do it... :-)
€15.99
*
currently 6x in stock
T-Work's TT-095 - Ride Height Tool - 1/10 Touring - 3-7.5mm
Suitable for a range from 3 to 7.5mm ride height.
€18.99
*
currently 11x in stock
T-Work's TT-096 - Ride Height Tool - Onroad - 3-15mm
Suitable for a range from 3 to 15mm ride height.
€19.99
*
currently 9x in stock
T-Work's TT-097 - Ride Height Tool - Offroad - 3-42mm
Suitable for a range from 3 to 42mm ride height.
€27.99
*
currently 18x in stock
T-Work's TA-144 - Brass Shims - 3x6mm - 0.5 / 0.75 / 1.0 & 2.0mm (each 10 pcs) + box
Sometimes it's helpful to have even the shims as heavy as possible.
€21.99
*
currently 14x in stock
T-Work's TE-198-X423 - DLC coated Shock Shafts - for XRAY X4 2023 (4 pcs)
Will be used instead of XRAY 308365 and will fit in any car which is using this part. X4 2023, X4 2024 DLC coated shock shafts for very smooth operating shocks.
€18.99
*
currently 8x in stock
T-Work's TT-087-17 - Power Tool Nut Driver Tip - 17.0mm
Powertool insert - 1/4 inches, 6.35mm
€18.99
*
currently 7x in stock