Products from Yeah Racing
Verantwortlicher nach GPSR – person responsible GPSR:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
Hersteller – manufacturer:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
No results were found for the filter!
NEW
Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.
€35.99
*
currently 4x in stock
NEW
Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.
€19.99
*
currently 4x in stock
NEW
Move the upper camberlink on your Tamiya TT-02 to a vertical mounting for easier height adjustment!
€14.99
*
currently 10x in stock
NEW
Move the upper camberlink on your Tamiya TT-02 to a vertical mounting for easier height adjustment! The alu parts will be delivered in BLACK colour - even if it's shown in blue color in the installed picture.
€14.99
*
currently 10x in stock
Where should I put the setup system on the table? Yeah Racing answers this question in-house! The aluminum holder holds the Yeah Racing Setup System YT-0140 perfectly and keeps the table tidy. Always within reach and at the same time...
€34.99
*
currently 2x in stock
Spare part for the TATT-S04 conversion kit. May also be used for upgrading a standard TT-02 chassis - but other parts (depending on which car you already have) might be necessary.
€14.99
*
currently 3x in stock
220x80cm size
€29.99
*
currently 1x in stock
Yeah Racing Sn63 / Pb37 solder wires are formulated from a mix of 63% tin and 37% lead. Made from high quality metals, the flux core manufacturing process eliminates flux voids and irregular wire. A higher amount of Tin allows for this...
Content
0.05 Kilogramm
(€159.80 * / 1 Kilogramm)
€7.99
*
currently 3x in stock
Will fit for DSG-0050 and DSG-0055 shocks. Does NOT fit for DBB Qutus shocks! Please take care: The colour of the sealings might be different than shown in the picture.
€4.99
*
currently 5x in stock
Gain smoother cornering on your Tamiya tourer with these double jointed driveshafts! For: Tamiya TA06 TA08 Material: Spring Steel Color: Brown Replace : Tamiya 42216
€32.99
*
currently 8x in stock
Upgrade part for you to install shorty packs onto your Tamiya TT02, quick battery change with the included elastic bands
€19.99
*
currently 5x in stock
Secure your drivetrain bearings with these aluminum holders, offering more stability than the stock plastic part'
€14.99
*
currently 17x in stock
Aluminum gearbox cover for upgrading Tamiya's TT02! Full aluminum housing helping with the rigidity of your chassis. This set will include ONE set. For a complete car you will need TWO of them. Take care: Only the first picture shows...
€49.99
*
currently 8x in stock
Upgrade set for your Tamiya TT02, comes with two Aluminum gearbox covers for upgrading the front and rear! Full aluminum housing helping with the rigidity of your chassis. Also comes with Big Bore shocks paired with graphite shock towers.
€109.99
*
currently 10x in stock
Aluminum handle cover for Sanwa's M17, adding extra bling and strengthening the handle!
€24.99
*
currently 4x in stock
Accurately check if your 1/8 Onroad car has any form of tweak with this set of bearing supported weighted setup wheels! Place your car on a flat surface and have the weights spun on their side. Slowly lift your chassis and if a side...
€79.99
*
Aluminum motor mount and cover package to better protect your gears and offer better cooling!
€39.99
*
currently 1x in stock
For the use with 1:10 touring cars. Accurately measure the downstop across all your cars with this downstop gauge which allows you to measure your axle height from the bottom of your chassis! If that is not to your liking, the...
€24.99
*
currently 19x in stock
Two piece aluminum and graphite damper mount for your Tamiya MB01, lightweight and durable!
€15.99
*
currently 6x in stock
Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!
€24.99
*
currently 1x in stock
Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!
€14.99
*
currently 5x in stock
Aluminum chassis brace, which also seconds as a fan mount with the included 540 tornado fan to keep your motor cool!
€19.99
*
currently 10x in stock
Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance! Arms are suitable for the front and rear.
€24.99
*
currently 1x in stock
Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!
€14.99
*
currently 4x in stock
Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!
€15.99
*
currently 10x in stock
Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!
€24.99
*
currently 10x in stock
Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance! Arms are suitable for the front and rear.
€19.99
*
currently 1x in stock
Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!
€8.99
*
currently 10x in stock
G45 Steel Drive Axle for Tamiya's T3-01 Trike! A change back to the traditional axle style of mounting for a more secure way of installing wheels! Included are a set of shims for you to change the trackwidth!
€19.99
*
currently 10x in stock
Setup your 1/28 Racer with ease with this Tool Set! Comes with all the tools you would see used to setup 1/10 Touring Cars, comes with enough tools for you to setup the Droop, Rideheight and Camber. TAKE CARE: It's made for Mini-Z....
€39.99
*
currently 2x in stock
Install a 370 or 380 size motor onto your 540 sized motor mount! Sometimes you want slower speed and with a smaller motor this is the perfect way to achieve that! Included is a sleeve adaptor for you to use your normal sized pinions!
€11.99
*
currently 9x in stock
Set of three different springs - four pieces of each. Suitable for 50mm Big Bore shocks. Spring length: ca. 20mm Spring inner diameter: ca. 14mm
€8.99
*
currently 7x in stock
Set of three different springs - four pieces of each. Suitable for 55mm Big Bore shocks. Spring length: ca. 26mm Spring inner diameter: ca. 14mm
€8.99
*
currently 3x in stock
Upgrade part series for Tamiya's BB-01 chassis, upgrade stock parts to remove play and increase durability!
€24.99
*
currently 3x in stock
Upgrade part series for Tamiya's BB-01 chassis, upgrade stock parts to remove play and increase durability!
€24.99
*
currently 3x in stock
Aluminum motor mount and cover package to better protect your gears and offer better cooling!
€39.99
*
currently 3x in stock
Upgrade part series for Tamiya's BB-01 chassis, upgrade stock parts to remove play and increase durability!
€15.99
*
currently 3x in stock
Aluminum spring tension nut for use in Tamiya's BB-01, being made from aluminum allows you to tighten it further than the plastic part.
€11.99
*
currently 3x in stock
Upgrade part series for Tamiya's BB-01 chassis, upgrade stock parts to remove play and increase durability!
€24.99
*
currently 2x in stock
Upgrade part series for Tamiya's BB-01 chassis, upgrade stock parts to remove play and increase durability!
€4.99
*
currently 2x in stock
Upgrade part series for Tamiya's BB-01 chassis, upgrade stock parts to remove play and increase durability!
€5.99
*
currently 3x in stock
Protect your gearbox and front suspension with this stainless steel protector set, being stainless steel you can run this through water without problems!
€21.99
*
currently 1x in stock
Upgrade part series for Tamiya's BB-01 chassis, upgrade stock parts to remove play and increase durability!
€24.99
*
currently 3x in stock
Stainless steel chassis protector and stiffener, offering you a better handling chassis and better durability!
€24.99
*
currently 3x in stock
Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task. Content: 1 Pair - as shown in the first picture.
€8.99
*
currently 139x in stock
Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task. Content: 1 Pair - as shown in the first picture.
€8.99
*
currently 14x in stock
Neatly sort your pit space with this tool stand with three separate compartments to store small parts such as screws and bodyclips! 12.5x9x1.8cm 190g weight Hole diameter: 18.2mm - 10 pcs
€24.99
*
currently 8x in stock
Neatly sort your pit space with this tool stand with three separate compartments to store small parts such as screws and bodyclips! 12.5x9x1.8cm 190g weight Hole diameter: 18.2mm - 10 pcs Including 10 tools with alu handle!
€89.99
*
currently 4x in stock
Aluminum servo and Gyro mount, being made of aluminum allows for it to double as a heatsink for your highspeed servos which may become hot.
€16.99
*
currently 3x in stock
Aluminum stiffener for Tamiya's XV-02, reinforcing the area between the shock tower and steering for a more responsive steering!
€9.99
*
currently 1x in stock
Aluminum shock tower mount for Tamiya's XV-02, providing a more stable base for both the shock tower and steering rack. Fits front or rear use. Needs to be used with the additional schock tower: TXV2-001BK for front TXV2-002BK for rear
€15.99
*
currently 1x in stock
Aluminum spur gear holder for Tamiya's XV-02, providing a more stable platform for mounting your spur!
€9.99
*
currently 1x in stock
Aluminum upgrade parts for Tamiya's XV-02, reinforcing your chassis to aluminum, reducing slop in moving areas and aiding in heat dissipation
€15.99
*
currently 2x in stock
Spring steel driveshafts for higher durability and a more responsive throttle feedback.
€26.99
*
currently 3x in stock
Graphite shock towers for better durability with minimal weight increase. Needs the additional shock tower mount TXV2-003BU which fits front or rear use.
€14.99
*
currently 3x in stock
Graphite shock towers for better durability with minimal weight increase. Needs the additional shock tower mount TXV2-003BU which fits front or rear use.
€14.99
*
currently 1x in stock
Aluminum heatsink with a offset center position which allows for more flexibility with wiring and not getting into way other things as well. We recommend to use the fan with 6V only.
€13.99
*
currently 71x in stock
Tool wrenches designed in conjunction with World Champion across multiple disciplines: Atsushi Hara! Laser etched notches on the tip for easy identifying different tip sizes and
€21.99
*
currently 9x in stock
Tool wrenches designed in conjunction with World Champion across multiple disciplines: Atsushi Hara! Laser etched notches on the tip for easy identifying different tip sizes and
€21.99
*
currently 14x in stock
Tool wrenches designed in conjunction with World Champion across multiple disciplines: Atsushi Hara! Laser etched notches on the tip for easy identifying different tip sizes and
€21.99
*
currently 11x in stock