Suitable for G42 - the 1/10 FWD car from FENIX Racing.

Suitable for G42 - the 1/10 FWD car from FENIX Racing.

Suitable for G42 - the 1/10 FWD car from FENIX Racing.

In 1983 Lancia need a new car to compete with Porsche, in Group C class. So far, using the synergy of the group, they choose a huge Ferrari V8 twin turbo as engine, tuned by Abarth, while the chassis was prepared by Dallara. The result was the elegant and refined Lancia LC2, especially in his classic livery. The fight was sort of "David and Goliath". While Porsche 956 was...

Craft your own masterpiece with our unassembled, unpainted car body featuring authentic Audi decals, licensed by Audi AG. Elevate your project with genuine Audi flair and attention to detail. Get ready to turn heads on the road. Key Features • 1mm polycarbonate special strengths • Official Audi AG licensed decals • Side mirrors and spoiler with max. downforce Scale: 1/10...

Genuine Mugen spare parts! Replacement for A2420

Genuine Mugen spare parts! Replacement for A2416

Viper 990-e EVO 1/8 EP 4WD Car Kit ​Delivered as a kit - no electronics, no motor, no batteries, no body, no wheels.

Features: Durable materials and extra-hard CNC housing Up to 60,000 RPM! IP67-certified Linear and smooth operation High-precision bearings for durability and smooth running Overheating protection when combined with the MAX8 G2S Technical data: Scale: 1/8 Type: Brushless sensored Pole: 4 KV Ratind: 2250 KV LiPo: 3-6S no-load: 5.3A Outer diameter: 42mm Length: 78mm Shaft...

ESC Technical Data: Current: 160A / 1050A Motor Limit: with 4S LiPo: KV with 6S LiPo: KV Motor Size 4278 Input: 3-6S LiPos BEC Output: 6V / 7.4V / 8.4V (switchable) Fan: included Size: ca. 60 x 48 x 40.5mm Weight: ca. 192g Plug: XT90 Motor Technical data: Type: Brushless sensored Pole: 4 KV Ratind: 2500 KV LiPo: 3-4S no-load: 5A Outer diameter: 42mm Length: 78mm Shaft...

Features: - Capacity: 7000mAh - Nominal voltage: 7.6V - Discharge Rate: 75C/150C - Length: ca. 113m - Width: ca. 46.5mm - Height: ca. 25mm - Weight: ca. 250g - Plug: 5mm Plug - Balancer: 2mm Plug Charging and storage instructions: Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We...

MUGEN SEIKI MTC-3 Mugen Seiki is excited to announce the new MTC-3 electric touring car kit. The MTC-3 is an evolution of the highly successful MTC-2 and MTC-2R platform. The prototype was first raced at the 2024 IFMAR World Championship, where the two MTC-3’s entered in the event both qualified for the A-Main final in its first event with Ronald Volker finishing 4th and...

Made for RCK-KleinSerie

You don't want to use the included headlight inserts? No problem - just use a sticker for the headlight. Oh, wait. Tamiya doesn't include headlight stickers for the 992 GT3 R... RCK will care ;-)

The RUDDOG Racing RNX.4 is the next evolution of RUDDOG’s high-performance nitro offroad engines, building on the success of its predecessor, the RNX22.3. Developed in collaboration with top racers, the RNX.4 was used in its prototype stage by Marcus Kaerup at the 2024 World Championships in Redovan, Spain, where he secured a place in the A-Main. This latest version features...

Machined 6061 alloy fan mount for 30mm fans (fan not included). Allows secure, low profile fan mounting to any flat surface with a 3mm chassis hole. 2-m2.5 fan screws and 1-m3 mount screw included.

Suitable for the Mistral - the FENIX Racing formula car.

Suitable for the Mistral - the FENIX Racing formula car.

Suitable for the Mistral - the FENIX Racing formula car.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

Only available in German language.

As shown. For older ORCA brushless motors. Details unknown.

Standard size for most of the todays touring cars - to be used with the wheel hubs. 10 pcs - ready to use - pre-oiled.

Square Alloy Spacer - available in many different colours and sizes.

Square Alloy Spacer - available in many different colours and sizes.

Genuine Schumacher Spare- and Optional-Parts!

Will prevent the rear part of the lower deck from damages and scratches. Set of two pcs. cause this part will wear - instead of the lower deck :-)

Will prevent the front part of the lower deck from damages and scratches. Set of two pcs. cause this part will wear - instead of the lower deck :-)

This product is compatible with the original number #365444 Spring Steel Diff. Joint has high strength to reduce the impact and pressure of the model car during driving. Features: Steal light design to reduce the weight of the model car Improve the acceleration performance and handling speed of the model car, improve the efficiency of power transmission. The shaft center...

This product is compatible with the original number #364963 Spring Steel Diff. Joint has high strength to reduce the impact and pressure of the model car during driving. Features: Steal light design to reduce the weight of the model car Improve the acceleration performance and handling speed of the model car, improve the efficiency of power transmission. The shaft center...

This product is compatible with the original number #364962 Spring Steel Diff. Joint has high strength to reduce the impact and pressure of the model car during driving. Features: Steal light design to reduce the weight of the model car Improve the acceleration performance and handling speed of the model car, improve the efficiency of power transmission. The shaft center...

The Drive Shaft makes the model car have smoother power transmission system,enhance the model car starting significantly and improve transmission efficiency and speed.

The Drive Shaft makes the model car have smoother power transmission system,enhance the model car starting significantly and improve transmission efficiency and speed.

64 Titanium Adjustable Body Shell Front End Downtravel Screw V2 with round ball design, enjoy the ultimate smoothness and keep your model car in the best condition at all times. Features: High quality lightweight titanium alloy material, strong and durable, improve performance Round ball design reduces surface friction and improves the smoothness of parts.

64 Titanium Adjustable Body Shell Front End Downtravel Screw V2 with round ball design, enjoy the ultimate smoothness and keep your model car in the best condition at all times. Features: High quality lightweight titanium alloy material, strong and durable, improve performance Round ball design reduces surface friction and improves the smoothness of parts.

-This handle made with high strength carbon fiber bring benefit to lightweight and high strength. Ensure it won't bend and durable. -Only can use with either TT-116-A/B adjustable ride height gauge, help you easier to put the ride height gauge to the Centre of chassis.

10mm Chassis Droop Gauge Blocks is used to measure the height of the lower stop of the swingarm and the axle height of the output shaft, which is one of the indispensable tools for tuning the vehicle to improve the accuracy and consistency when tuning the suspension system of the shock absorber.

Domino Droop Gauge Extender 10mm used with TT-129-A, each stacked layer adds 10mm, convenient to realize the needs of frame data tuning changes.

Features: 1. Carbon fiber material lightweight and portable design; 2. Exquisite shape design, streamlined appearance, practicality and aesthetics coexist; 3. Precise regulate and measurement, meet different regulate needs; 4. Optimize driving performance and stability to ensure the best handling performance and tire life

Features: 1. Carbon fiber material lightweight and portable design; 2. Exquisite shape design, streamlined appearance, practicality and aesthetics coexist; 3. Precise regulate and measurement, meet different regulate needs; 4. Optimize driving performance and stability to ensure the best handling performance and tire life

A perfect wheel arch is not only a matter of appearance but also of durability. If the wheel arch appears stepped or has small cuts, these are all potential points where the bodywork could crack with the next movement. If you run this tool over the cutting edge, it will be even and thus remain durable. With a little feel in your hand, you can also sand straight edges with...

Spare part for TT-130-A

Taken from a TA-02 kit. Consist of 1x 5x11mm Thrust Washer from 9803252 1x 6mm Thrust Washer from 9803268 8x 1/16 inch Steel Balls from 51417 Take care: For a complete thrust bearing you will addionatelly the composite housing (gear set 50529)