Genuine Tamiya spares - maybe the best solution for your car!

Spare part for the GeForce spring rate gauge which is necessary if you want to measure very short or very hard springs.

The currently most popular type of rear axle shaft construction for 1:12 scale cars is the use of a spool (rigid axle – without any differential effect). Many manufacturers fail to build this spool that is stable, durable, and lightweight at the same time. Awesoamtix has done a great job of this. The Awesomatix spool can also be installed in most other 1:12 scale cars on the...

As usual, we’ve make a good use of the drivers suggestion, and we’ve developed the R14. A new path for Pro10 bodies, with the use of the center of the body to create most of the downforce. The new way of design allow a minimal longitudinal flex of the body, improving the rigidity of the rear end. A “Gurney Flap” is provided in the mold to further tune the rear end grip. The...

Suitable for the Mistral - the FENIX Racing formula car.

FENIX is an absolute enthusiast of the Formula classes. To match this love, there is, of course, a current Formula model from Fenix. Key data: - 2WD rear-wheel drive - Ball differential on the rear axle - Carbon chassis plate - Independent suspension with king-pin axle at the front - Front camber adjustable via R/L threaded rods - Caster adjustment possible by moving the...

Suitable for G42 - the 1/10 FWD car from FENIX Racing.

Precut for ARC R8 Electric. Scale: 1/8 Unpainted, including side stiffeners with window stickers.

TS040 Body - EFRA 31540 - 1:8 Onroad - 0.6mm - SUPER LIGHTWEIGHT 0.6 Fits the most VG8 typical cars like XRAY RX8, Serpent 977 and so on... Scale: 1/8 Unpainted, not cut, including side stiffeners and window masks.

Using the inserts the Flex Bumper can be positioned more forward to accomedate the body. Standardposition is 0. The inserts without dots can either provide 0mm or turned around +5mm in positioning. The insert with one dot can either provide +1mm or turned around +4mm in positioning. The insert with two dots can either provide +2mm or turned around +3mm in positioning.

Genuine spare and option parts by ARC!

Genuine spare and option parts from ARC.

Fits FlySky NB4 and NB4+ Technical Specifications Capacity: 4300mAh Input: DC 5V/2A Output: DC 5V/1A Port: Micro USB

Fits FlySky NB4 and NB4+ Technical Specifications Capacity: 4300mAh Input: DC 5V/2A Output: DC 5V/1A Port: USB-C

Fits FlySky NB4+ pro Technical Specifications Capacity: 4300mAh Input: DC 5V/2A Output: DC 5V/1A Port: USB-C

Replacement Trigger - new Version

Suitable for MBX8 / MBX7R / MBX7

Suitable for MBX8R

Suitable for MSB-1

This product is compatible with the original number:#91132 Inner gear shaft is made of 7075-T6 aluminum alloy with hard coated process surface to enhance wear resistance and hollow design to reduce weight.

Alum. Sus. Mount C made of 7075-T6 material with black anodized surface, thickened design around the position of the mounting rubber sleeve to enhance the hardness and prevent the rubber sleeve from being damaged in the event of an impact to enhance safety. This product is compatible with the original number # 92432 #

This product is shared with the original 92420 Diff Cross Pin is made of 7075-T6 aluminum alloy with hard coated process surface to enhance wear resistance. The design of the cross shaft keeps the two axles of the differential at cross perpendicularity to make the differential smoother.

Stainless Steel Front Chassis Skid Protector ,can effectively reduce the friction between the front chassis and ground or race track, reduce wear and tear, prolong the use of the front chassis, reduce the frequency of replacement and maintenance costs, and more effectively enhance the performance of the model car.

Suitable for Kyosho MP10 / MP9 Shock caps are constructed from high quality aluminum with Black Anodized adding strength and durability. The package includes 3 different adjustable shock caps and 3 different seals - honeycomb, round cap, and O-ring, can be assembled. Each combination will have different shock rebound effects, to keep the shock system at its best working...

Latest version with updated color. NOT the black ones anymore.

Made from 3mm high-quality carbon with a diameter of 61.8mm. Incl. 4pcs of aluminum nuts for easy assembling.

BURI-Racer E1.3 '22: The further development of the successful trendsetter BURI-Racer E1.2 as an entry-level model in the fast, unsprung E8 on-road (stock or PAN) class. Highlights: - New chassis design with more flex and options for all battery options (4s block, 2x 2s stick, or 2x 2s shorty) - Vertical steering servo (low profile) with aluminum servo saver - Unique height...

BURI-Racer E1.2 '24: a small new edition of the BURI-Racer E1.2 as an entry-level model in the fast, unsprung E8 on-road (stock or PAN) class. The successful original BURI established this racing class and is also very popular as a simple training vehicle, true to the motto: Fast - Simple - Fun. Less maintenance means more time for (driving) fun. The BURI-Racer E1.2 is the...

BURI-Racer E1.2 '24: a small new edition of the BURI-Racer E1.2 as an entry-level model in the fast, unsprung E8 on-road (stock or PAN) class. The successful original BURI established this racing class and is also very popular as a simple training vehicle, true to the motto: Fast - Simple - Fun. Less maintenance means more time for (driving) fun. The BURI-Racer E1.2 is the...

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Many car kits include plastic shims as standard, which are easily deformed and changed in their height. By this deformation and wear of the soft plastics (for example when used at suspension arms) there will be excessive free play which causes bad handling of your model....

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Flanged Alloy Wheelnuts extend the support surface to rim in comparison to the standard wheelnuts. The Nylock ring secure the nut from not wanted unscrewing during the run. The BASEIQ Alloy nuts are machined from high grade alloy material, and available in different...

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Flanged Alloy Wheelnuts extend the support surface to rim in comparison to the standard wheelnuts. The Nylock ring secure the nut from not wanted unscrewing during the run. The BASEIQ Alloy nuts are machined from high grade alloy material, and available in different...

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! Flanged Alloy Wheelnuts extend the support surface to rim in comparison to the standard wheelnuts. The serrated backside “bites” itself into the rim secure the nut from not wanted unscrewing during the run. The BASEIQ Alloy nuts are machined from high grade alloy material,...

BASEIQ products give you the chance to make RC model more precise in handling as well as more reliable! BANDO belts are known for their durability and quality. Here's a low-friction version that further improves your vehicle's drivetrain and increases efficiency! 351mm – suitable for most mid-engine touring cars. This set consists of: 2x BANDO 351mm low-friction belts, WHITE...

The droop gauge with 10mm chassis blocks and droop measure wheels is lightweight and small, ideal for transportation. It can measure the axle height from 21.5 - 24.5mm in 0.2mm steps. The set includes: - 1 droop gauge - 2 chassis blocks 10mm - 2 droop measurement wheels

EFRA 4097 Scale: 1/10 Wheelbase: ca. 257mm Width: ca. 190mm Unpainted, not cut, including wing, small decal sheet and window masks.

EFRA 4097 Scale: 1/10 Wheelbase: ca. 257mm Width: ca. 190mm Unpainted, not cut, including wing, small decal sheet and window masks.

EFRA 4097 Scale: 1/10 Wheelbase: ca. 257mm Width: ca. 190mm Unpainted, not cut, including wing, small decal sheet and window masks.

EFRA 4096 Scale: 1/10 Wheelbase: ca. 257mm Width: ca. 190mm Unpainted, not cut, including wing, small decal sheet and window masks.

EFRA 4096 Scale: 1/10 Wheelbase: ca. 257mm Width: ca. 190mm Unpainted, not cut, including wing, small decal sheet and window masks.

EFRA 4096 Scale: 1/10 Wheelbase: ca. 257mm Width: ca. 190mm Unpainted, not cut, including wing, small decal sheet and window masks.

The wheel arch marker is made from 2mm carbon fiber. With the included 5mm bars it can be fitted for different tire diameters.

The stiffeners are made with a thin carbon stick and have 3D-printed sockets. The sockets can be mounted into the body using glue or tape (both not included). Each set weighs 2g.

Width: 35mm Inner Diameter: 40mm Outer Diameter: 60mm

Width: 30mm Inner Diameter: 40mm Outer Diameter: 60mm

Futaba 2.4GHz transmitter incl. receiver. No batteries included and also no batterycase - we recommend to directly use a LiPo battery instead.

One pot of each.

Only available in German language.

XRAY has modified the colour of those parts. This offer is still for the "old" black colour.

Standard size for most of the todays touring cars - to be used with diff and spool. 4 pcs - ready to use - pre-oiled - with rubber sealings