Now available - RCK Sponsor T-Shirts! T-Shirts made from 100% cotton. Available in sizes S-4XL - see measurement details in the product pictures. You are looking for an individual print with your favorite brands? Check www.stickon.shop - it's our supplier for this fantastic shirts and he is able to do whatever you want :-)

Now available - RCK Sponsor T-Shirts! T-Shirts made from 100% cotton. Available in sizes S-4XL - see measurement details in the product pictures. You are looking for an individual print with your favorite brands? Check www.stickon.shop - it's our supplier for this fantastic shirts and he is able to do whatever you want :-)

Now available - RCK Sponsor T-Shirts! T-Shirts made from 100% cotton. Available in sizes S-4XL - see measurement details in the product pictures. You are looking for an individual print with your favorite brands? Check www.stickon.shop - it's our supplier for this fantastic shirts and he is able to do whatever you want :-)

The use of this set provides a -6mm shorter wheelbase with AT1204 steering blocks, and a -3mm shorter wheelbase with AT1204-ZT steering blocks. consists of: 1pcs C1201-6.0 1pcs C1205-6.0

A12WC 1/12-Scale Electric On-Road Car The A12WC a refined version of the previous A12 kit firstly introduced during the 2020 World Championship and recently crowned IFMAR Spec World Champion in the hands of Awesomatix’s team manager Max Mächler. It includes the proven A12 concept where the rear spring action is controlled by the flexing of the chassis itself assisted by a...

A12X 1/12-Scale Electric On-Road Car The A12X brings its design slightly more towards traditional 12 th scale cars where side and rear spring actions are independent. This is achieved thanks to a built-in coil spring inside the rear damper and new side coil springs positioned at the very front of the chassis.The new steel chassis brings the CG even lower and allows for a...

A800FX Stickers Sheet

With the A800R platform reaching its maturity it is now time for the world of front-wheel-drive touring to benefit from more than two years of extensive development of its touring car counterpart. The A800FXR builds on the proven A800R touring car concept - shortened chassis plate for minimal overhang and chassis rub and improved damping characteristics over the FX Evo...

A800MMX Stickers Sheet

LATEST VERSION! Now including the new alu lower deck C01B-RAF. This lower deck is not shown in the pictures of the build car. We've added it as single picture - it's the last one in our galery. THE new Awesomatix A800R touring car features: 1. Compact shorter lower deck with an all new shape. The new shape of the lower deck allows the car to dive and roll more without...

THE new Awesomatix A800R touring car features: 1. Compact shorter lower deck with an all new shape. The new shape of the lower deck allows the car to dive and roll more without excessive rubbing on the track. 2. New dampers. New dampers have an even lower center of gravity. New dampers provide independent adjustment of the damping level and the suspension spring rate. New...

Optional Alloy Battery Holders for A800R. Width for battery adjustable via sliding the AM280R in and out. Length for battery adjustable via P68 Battery adjusters (kit parts). Only suitable for A800R. Total weight: ~6g.

Gear Box

Will also fit to any kind of A700 / A800. A bit wider and longer than the old A800 standard part.

Servo Holder Right

Shocks Holder

Genuine Awesomatix spare parts!

Steering Rod

Spare part for the MMCX-2 kit. Can be used also as optional for the old MMCX kit.

Optional part for the MMCX kit. Will allow different flex settings in the back of the car.

AM105H MMX Rear Stiffener. Heavier version (30g. total weight) of AM105. Useable with all Middle Motor chassis.

Spare Part for DL

Awesomatix A700-AM11-2 - Tower

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Spare part for HRB.

Official replacement for AM12-1 - with a higher range of settings for different kind of batteries (like LCG).

Spur Holder

Genuine Awesomatix spare parts!

AM14H Steering Arms are a special stronger version of the AM14LS steering arms (same footprint). Recommended to use when racing on tracks with click-track / hard boards.

Especially made for the new LS1. Can be also used without LS1. Without LS1 also for A700 suitable!

Battery Nut x 2

Genuine Awesomatix spare parts!

Spare part for the ABH set.

Genuine Awesomatix spare parts!

AM177-2 Motor Mount for A800MMX/A made from high grade 7075 T6 alloy. The new version features an increased slot for the ESC wire to allow an easier electronics installation. Additionally, the AM177-2 has the Belt Anti Skip unit integrated To make use of this, you need additionally 1x B73SS ball bearing and 1x SB3X5 screw. (INFO - A800-BAS set is not suitable to use with...

Alu Damper Holder The range of adjustment for A and B is reduced, compared to the old A800 parts. Please make sure not to mix up!

Alu Damper Holder The range of adjustment for A and B is reduced, compared to the old A800 parts. Please make sure not to mix up!

AM180EVO2 SB Bellcrank for the Single Bellcrank Steering. The EVO2 version is an updated design of the EVO version and features an additional screw on top that secures the bearings in the alloy part and avoids a bearing shift at high force impacts. INFO: AM180EVO2 is only compatible with ST118L-1 !

The EVO version is equipped with the same bigger bearings as the M5 version to further increase the reliability. Furthermore the height of the AM180EVO is slighlty adjusted to avoid contact with P12X at certain setups. By this change, less bumpsteer shims are needed on the steering arm, which reduces the stress in this part. To keep the same bumpsteer value as with AM180M5...

Genuine Awesomatix Spare Parts!

Spare part for FSS.

In normal positions these holders provide +1mm longer top link compared to AM19R. Reverse mounting is also possible to get extra long top links which are ~10mm longer than AM19R. (requires optional AT25-2 turnbuckles!). It also offers an intermediate mounting position which provides ~8mm longer top links. AM19-LTL should be mounted reverse for that. One link mounted on the...

Genuine Awesomatix spare parts!

IAS Steering Rod

IAS Steering Plate

IAS Steering Arm x2

Weighs 20g. + space for optional 6x ST110 (not included). Fits with P14-1X / P14-1-R in combination with P15FX.

Awesomatix A700-AM23-1 - Rear Steering Arm x 2

This version is longer compared to the previous AM23-1 Rear Steering Arm. This feature reduces the free play of the rear toe and improves ARS characteristics. The improved characteristics of the ARS helps with better midcorner steering and reduce the risk of snap oversteer during load changes. We recommend to use 0,5mm less bumpsteer shims, to keep the same ARS action as...