Awesomatix A700-AM23-1 - Rear Steering Arm x 2

This version is longer compared to the previous AM23-1 Rear Steering Arm. This feature reduces the free play of the rear toe and improves ARS characteristics. The improved characteristics of the ARS helps with better midcorner steering and reduce the risk of snap oversteer during load changes. We recommend to use 0,5mm less bumpsteer shims, to keep the same ARS action as...

AM24-20 optional Servo Holder for all A800 car models (beside A800FX) in combination with SB1 Steering. This new designed part combine servo holder and steering holder to one single part. It offers a more equal chassis flex as the Servo holder doesn't need to be screwed outside of the chassis center line.

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts! Ball bearings already included.

Genuine Awesomatix spare parts! Ball bearings are already included.

Genuine Awesomatix Spare Parts!

Spare part for FSS.

Rear Ball Holder x 2

Genuine Awesomatix spare parts!

Awesomatix AM279 Rear Belt Tensioner for A800R. Mounted on the chassis, right behind the motormount. Further reduces belt skipping on the rear pulley and extends the lifespan of the belts.

Trial Caster Link

Spare part for the ABH set.

Spare part for FD.

Awesomatix A700-AM30-5 - Chassis Stiffener

Genuine Awesomatix Spare Parts! You want to convert your existing A800FX into an A800FX EVO? No problem. You will need: C01FXAL or C01FXCL AM24FX AM180FX 2x AM78FX AM30FX AT159 C27FX-S For a full conversion you should add also: C107S ST230 If your car does not already include you may also upgrade to: ST69-00 and AT119 C15A D2.2-S-P

Chassis Stiffener Long

FFG Gear Box Support

Awesomatix A700-AM42-3 - FFG Links Holder Front

FFG Main Shaft Support

Short FFG Tower

FFG Rear Stopper

Awesomatix A700-AM54-3 - FFG Links Holder Rear

FFG Clamping Bar

Awesomatix A700-AM69 - MM2 Battery Support

A800 Alu Steering Bellcrank (including bearings)

Genuine Awesomatix spare parts!

Spare parts for cars using the MMCX conversion kit.

Direct replacement for AM77X. It includes a holder for DL / DL-A and offers a 0.5mm gap in the rear for a different flex setting.

Genuine Awesomatix Spare Parts! Please note: It's a standard AM78X1 Bulkhead which has been modified. The modified area is not anodized anymore. Can be also used in A800FX.

A800X Alu Bulkhead (1 piece) Direct replacement for AM78, AM78X and AM78X1 If you want to replace an old one we recommened to change always both. AM78X3 Bulkhead made from high grade 7075 T6 alloy. This version features slightly modified end tips to further extend the clearance of the steering link at full lock under suspension up travel. It's a direct replacement for AM78X1...

Awesomatix A700-AM80 - RFG Body Holder

Awesomatix A700-AM81 - RFG Bearing Housing

Awesomatix A700-AM82 - RFG Plate

Awesomatix A700-AM83 - RFG Links Holder

Spare part for LS1

Spare Parts for LS2 There is a mistake in the manual. AT862 doesn't exist. AT862 = AM862

Spare Parts for LS2

A800 Alu Shock Holder - left

A800 Alu Shock Holder - right

VTD Holder

The APS - Additional Progressive Spring set is designed for use in the Awesomatix A800R touring car. Progressive conical tapered springs of the APS set press on the lower suspension arms and add a progression into the suspension spring rate. Test results showed more consistent laptimes with improved overall feeling on the low-med grip asphalt and carpet tracks. Two types of...

Servo Gear Set - will fit to AS-700L and AS-701L as well.

Diff Case1

Alu Spool Axle. Will fit only to P138S / P138LFS and must be used with SB3X5 Screws! Then it's possible to use in A800, too. Replacement for AT03B - please use new pulley and bigger screws as described above.

Awesomatix A700-AT03M - Spool Axle

New spool design with reduced weight (only 2,6g.) and improved rigidity. Only compatible with P138A / P138A-LF Pulley (3pcs SC2x4 needed!)

Awesomatix A700-AT04-2 - Main Shaft

Antenna Holder

Replacement part for PSS.

Replacement part for PSSX

Spur Nut

Genuine Awesomatix spare parts! The ball bearings are already installed. We don't recommend to change them by yourself. It's recommened to get a complete new pulley. If you want to try it by yourself you will need the bearings B106RS and B84RS (one of each).

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Updated version of AT1203 with an additional notch for easy track width measurement.

Genuine Awesomatix part!

Awesomatix A12 Steering Block Zero Trail Short. The Steering Block overall height is 1,4mm less, which provides additional 0,7mm space for droop/ride height settings. contains: 1x A12-AT1204-ZT-S

Genuine Awesomatix part!