Ball Joint-2 x 4

Arm Ball Cap x 5

Arm Ball Cap x 5

Arm Hasp x 4

Sway Bar Joint x 4

Downstop Collar x 5

Arm Clip x 10

P09X set is for "progressive" settings of the springs. P09X set includes 4 pcs of P09X plastic parts and 4 pcs of DIN915 M3X3 set screws. One of additional holes is for DIN915 M3X3 screw and has 3,1 mm distance to the main RHS screw. The opposite additional hole is for RHS-P M2 screw and has 3,7 mm distance to the main RHS screw. Please notice the helpful manual which is...

Will replace any kind of DT10 - offers 26 steps (which is a lot!)

Sway bar mount. Can be used on old A800 kits, but it is necessary to change also: - lower deck (C01B-X, C01B-XA, C01B-XAH) - sway bar stopper AT142 - ball bearings B63SS You may need also different standard screws. Should be used only with the new lower arms (C04M1, C04AL1)

Ball End x 2

Awesomatix P13-4 Ball End set 18pcs. Spare/ replacement set for full car (TC & FWD kits) contains: 18pcs P13-4

A800 38T Pulley A bit more slim than P138 - official replacement for it.

Replaces P138 and P138-1. More precise. Narrow profile For A800 / A800X / A800MMX / A800R / A800FX Gear Diff. INFO: Doesn't fit for AT03B-X Spool!

P138A-LF 38T Pulley. Replaces P138LF and P138LFA More precise. Narrow profile For A800 / A800X / A800MMX / A800R / A800FX Gear Diff. INFO: Doesn't fit for AT03B-X Spool!

Spool Pulley Latest version - a bit more slim than regular.

Spool Pulley - will reduce friction. Latest version - more narrow than the previous one.

Successor and replacement for P13-4.

Successor and replacement for P13-4-S18. Spare/ replacement set for full car (TC & FWD kits)

The composite front bumper which fits to the foam bumper P15H-4. The foam bumper is not included. The picture just shows how it works.

Body Post Set

Bumper Set

Genuine Awesomatix spare parts!

Will fit to any A700 or A800 car kit.

Lock Ring x 4

P18 Ball Joint1 S x 2

Battery Pad x2

Outer Battery Holder x 2

FCB Body x 2

GD2 Cross Pin

Servo Arm

Servo Arm

Tuning Alu Sway Bar Stopper Set (4 pcs) Replaces the standard parts P42 which are made of plastic.

P46R Rubber Balls made out of special anti sticking rubber for GD2 (2pcs.) The P46R high precission Rubber Balls for GD2 will improve the volumen compensation of the Gear Diff. The result is more smooth and consistent operating of the Differential at any conditions.

Genuine Awesomatix spare parts!

Will fit also to A700 or A800.

Will fit also to A800. No thread lock necessary.

P63-R Damper Pistons for use in D3 and D2.2 Dampers (D2.2 requires AT41-2 Damper Vanes). New improved design for even better volumen compensation and sealing of the dampers. These Pistons are made of special anti sticking rubber. The result is more smooth and consistent operating of the dampers! contains: 4pcs A800-P63-R (colour of P63 parts can be either black or white)

1.5x7.8 Pin x 6

1.5x5.8 Pin x 2

A800-PSS set is designed to add 15% or 25% progressivity into the originally linear action of SPR01S and SPR01 springs in all A700/A800 cars. With the A800-PSS set the initial action of spring is softer at the beginning of the compression and becomes progressively harder when the suspension get compressed during downtravel of the car. Our tests showed that the car with PSS...

Awesomatix PSSX Progressive Spring System set is designed to add 30% progressivity into the originally linear action of SPR01S and SPR01 springs in all A700/A800 cars. Updated version of the previously known "PSS set". The PSSX set comes with the new ST69X-30 Screw with wider cap that provides 30% progressivity across an increased range of suspension travel and suspension...

Ride Height Screw x 4

M2.5x8 Button Head Screw x 5

M3x10 Button Head Screw x 4

M3x12 Button Head Screw x 4

Genuine Awesomatix spare parts!

M3x5 Button Head Screw x 4

Especially made from Awesomatix. The actual length is 5.3mm, made of hard A7075 T6 alloy. The screws are useful only for the top side of the car.

M3x6 Button Head Screw x 4

M3x8 Button Head Screw x 4

SC2X22 M2x22 Cap Head Screw x 2 Optional screw for BDL set. The length of the SC2X22 screws is optimal for the currently most popular FWD bodyshell''s.As there is a big variety of bodyshell's designs, there can be the need to short the SC2X22 screw by cutting. contains: 2pcs SC2X22

M2x4 Cap Head Screw x 2

M2x6 Cap Head Screw x 4

SC2X8 M2x8 Cap Head Screw x 4

M3x10 Flat Head Screw x 4

M3x12 Flat Head Screw x 4

M3x5 Flat Head Screw x 5

M3x6 Flat Head Screw x 4

M3x8 Flat Head Screw x 4