Sway bar mount. Can be used on old A800 kits, but it is necessary to change also: - lower deck (C01B-X, C01B-XA, C01B-XAH) - sway bar stopper AT142 - ball bearings B63SS You may need also different standard screws. Should be used only with the new lower arms (C04M1, C04AL1)

Ball End x 2

Awesomatix P13-4 Ball End set 18pcs. Spare/ replacement set for full car (TC & FWD kits) contains: 18pcs P13-4

The composite front bumper which fits to the foam bumper P15H-4. The foam bumper is not included. The picture just shows how it works.

Body Post Set

Bumper Set

Will fit to any A700 or A800 car kit.

Lock Ring x 4

P18 Ball Joint1 S x 2

Battery Pad x2

Diff Clamping Bar x 4

Outer Battery Holder x 2

Inner Battery Holder x 2

Battery Clamp x 2

Upper Diff Cover

Lower Diff Cover

FFG Front Stopper

FCB Body x 2

GD2 Cross Pin

Servo Arm

Servo Arm

Tuning Alu Sway Bar Stopper Set (4 pcs) Replaces the standard parts P42 which are made of plastic.

Will fit also to A700 or A800.

1.5x7.8 Pin x 6

1.5x5.8 Pin x 2

A800-PSS set is designed to add 15% or 25% progressivity into the originally linear action of SPR01S and SPR01 springs in all A700/A800 cars. With the A800-PSS set the initial action of spring is softer at the beginning of the compression and becomes progressively harder when the suspension get compressed during downtravel of the car. Our tests showed that the car with PSS...

Awesomatix PSSX Progressive Spring System set is designed to add 30% progressivity into the originally linear action of SPR01S and SPR01 springs in all A700/A800 cars. Updated version of the previously known "PSS set". The PSSX set comes with the new ST69X-30 Screw with wider cap that provides 30% progressivity across an increased range of suspension travel and suspension...

Ride Height Screw x 4

M2.5x10 Button Head Screw x 5

M2.5x8 Button Head Screw x 5

M3x10 Button Head Screw x 4

M3x12 Button Head Screw x 4

M3x5 Button Head Screw x 4

Especially made from Awesomatix. The actual length is 5.3mm, made of hard A7075 T6 alloy. The screws are useful only for the top side of the car.

M3x6 Button Head Screw x 4

M3x8 Button Head Screw x 4

M2x4 Cap Head Screw x 2

M2x6 Cap Head Screw x 4

SC2X8 M2x8 Cap Head Screw x 4

Awesomatix SD2 - A700 Spur Damper Set

M3x10 Flat Head Screw x 4

M3x12 Flat Head Screw x 4

M3x5 Flat Head Screw x 5

M3x6 Flat Head Screw x 4

M3x8 Flat Head Screw x 4

6x3x0.25mm Spacer (Silver) x 10

6x8x0.1mm Shims (4 pcs)

6x3x0.5mm Spacer (Silver) x 10

6x3x1.0mm Spacer (Gray) x 10

6x3x1.75mm Spacer (Black) x 10

Rubber Collar 5x2x2,7mm 2x

3x5x0.1mm Shim x 4

A700 / A800 - Shims 3x5x0.5mm - for ST03 (4 pcs) Good for lower ST03 balls!

Awesomatix A700-SH5X7X0.1 - Washer 5x7x0.1mm (4pcs)

Awesomatix A700-SH5X7X0.3 - Damper Washer

Optional Shim set of 2pcs 5x7x0.4 for the use in GD2 Gear Diffs instead of WA03 big washers. The smaller outer diameter of this shims allow more silicon oil behind the Satellite Gear which changes the behaviour of the Gear Diff. GD2 will stay even more consistent with the use of this optional shims, as less heat is generated by less friction. INFO: GD2 with small shims needs...

STD Shock Spring x 4

Soft Shock Spring x 4

Shock Rod Guide x 4

Shock Rod Guide Replacement for SPR02H3. Can be used on any A700 / A800 / A800X which uses D2.2 dampers (or D2.1 dampers with AT41-2 upgrade). SPR02X will be used with standard 90° springs (SPR01 / SPR01S).