Genuine Fenix Spare Part!

Genuine Fenix Spare Part!

Genuine Fenix Spare Part!

Genuine Fenix Spare Part!

Genuine Fenix Spare Part!

Genuine Fenix Spare Part!

Genuine Fenix Spare Part!

Genuine Fenix Spare Part!

Le Mans style races are becoming more and more popular. Side body holder, used to replace the original X1 body holder. Only the first picture shows the content of delivery. The second picture shows how to use it with a XRAY X1.

Genuine Fenix Spare Part!

Suitable for the Mistral - the FENIX Racing formula car.

Suitable for all Tamiya-style Formula cars, like XRAY, TOP, Serpent, Tamiya and so on... Total width: 149mm

Can be used instead of 371148 in any kind of X1 (X1 + 2016 + 2017). It has a bit different shape and offers a bit more flex. Just a bit.

Can be used instead of 371148 in any kind of X1 (X1 + 2016 + 2017). OPT003 BRASS - XRAY X1 BRASS MOTOR POD FENIX MOTOR POD FOR XRAY X1 MADE IN 2MM BRASS SOMETIME YOU NEED SOME EXTRA TRACTION AND ADD SOME WEIGHT IN THE LOWEST POINT OF THE MOTOR POD WILL RESULT BENEFICIAL. WAY MORE EFFECTIVE THAN ADD SOME LEAD, AS THIS MOTORPOD WILL LOWER THE COG OF THE REAR PORTION, ADDING...

Fenix Chassis for Xray X1 made in 2,5mm in quasi isotropic carbon fibre. Machined for improved torsion and handling Lighter than before with just 52 grams, the chassis is now sporting some important features: - Fully compatible with X1 -2017 and 2016 and 2015! Probably the best way to keep your car absolutely update. - Pocketed in the lower side of the chassis A nice balance...

RattleSnake conversion for Serpent SF2. Cross battery for optimized traction and better reactivity All parts are made in 2mm 7075-T6

Replacement Lower Deck for RattleSnake conversion for Serpent SF2. Will NOT fit to the F110 without the conversion kit.

RattleSnake conversion for Serpent SF2. Cross battery for optimized traction and better reactivity All parts are made in 2.5mm carbon fibre.

Now it's possible to change your caster.

Replace original Serpent 411284 All parts are made in 2mm 7075-T6

7075-T6 motor pod A lot of benefits in a single part: Motor sits lower Motor run cooler Only 4grams heavier Fit both, original yokomo carbon fibre chassis and Framega - 7075 chassis

Replace original Serpent Chassis All parts are made in 2mm 7075-T6

Replace original Serpent 411344 All parts are made in 2mm 7075-T6

Chassis for YOKOMO YRX12 Combo Chassis and motor pod, made in 2mm 7075-T6 Chassis has been strategically machined to save weight, and is a nice balance between flexiblity and rigidity. On top of that, we've put a lot of attention to reduce as much as possible the scrubbing while turning, the link area has been angle shaped to give some extre degree of rolling before hitting...

Black anodized, genuine 7075 alloy chassis. Wide: 83mm Weight: 83 grams

You will get only the two mounts - not a complete car :-)

Suitable for X1, X1 2016 and X1 2017 Slim version will mount the links from the upper side. Slim lower deck footprint will reduce track scrub and improve cornering speed.

Suitable for any FENIX Slim Line Conversion Kit. Screws and nuts are also included.

Slim version will mount the links from the upper side. Slim lower deck footprint will reduce track scrub and improve cornering speed.

Slim version will mount the links from the upper side. Slim lower deck footprint will reduce track scrub and improve cornering speed.

Slim version will mount the links from the upper side. Slim lower deck footprint will reduce track scrub and improve cornering speed. Combo with front caster support plate.

Reduces flex compared to the graphite lower deck. First choice for carpet tracks!

RattleSnake conversion for Serpent SF3. Cross battery for optimized traction and better reactivity All parts are made in 2mm 7075-T6 or Graphite.

OPT033 - YOKOMO BD8 - 2MM 7075 CHASSIS FIT BD8 2018 AND BD8 2017 Chassis has been carefully shaped to reduce chassis scrub while turning Black anodized, genuine 7075 - T6 alloy chassis. Wide: 85mm Weight: 79 grams

Made of 7075 T6 alu.

Made of 2.1mm graphite.

You will need an additional gear diff / rear axle to get your rear end also to 235mm. Only the first picture shows the content. The other pictures just shows how to use it.

More stiff - less flex!

This kit creates a 3mm wider front track width that will be helpful in high grip conditions. Car will be less aggressive and chances of traction rolling are reduced. Best used on high-traction

Chassis for XRAY X12 2018, made in 2mm 7075-T6 Chassis has been strategically machined to save weight, and is a nice balance between flexiblity and rigidity. On top of that, we've put a lot of attention to reduce as much as possible the scrubbing while turning, the link area has been angle shaped to give some extre degree of rolling before hitting the surface.

Only the first picture shows the content of delivery. O-Ring and other additional parts are not included.

Only the first picture shows the content. The other pictures just shows how to use it.

Only the first picture shows the content of delivery.

Offers more body hole locations.

BLACK ANODIZED, GENUINE 2MM 7075 - T6 ALLOY CHASSIS Width: 85mm - Weight: 57 grams Slimmer than the original chassis, has been designed to delivery the best performance and minimize scrub while turning.

2.5MM "FENIX RACING" CARBON FIBRE, LAYED IN A QUASI ISOTROPIC WAY. IMPROVED TORSION FOR A WIDER RANGE OF USE, FROM LOW GRIP TO HIGH GRIP. CHASSIS FOOTPRINT HAS BEEN TRIMMED DOWN TO THE MAX TO REDUCE TRACK SCRUB AND ALLOW MORE SOFTER SETUP

Alu Chassis für Shepherd Velox F1

You will need an additional gear diff / rear axle to get your rear end also to 235mm. Only the first picture shows the content. The other pictures just shows how to use it.

Main focus for this body was to be able to deliver a body that could supply straight line stability, while enough front and rear downforce for this high demanding class. NEW version - made of 0.75mm material which is lighter and faster. The body will be delivered unpainted and uncut. No window masks or decals included. Please take care: This body is made in very small qty....

We’re glad to show our new Pro10 body. As usual, we’ve make a good use of the drivers suggestion, and we’ve developed R10. The request was provide a body with a very good straight-line stability and, as well, plenty of front and rear downforce for a balanced feel. A “Gurney Flap” is provided in the mold to further tune the rear end grip, while the front end can be balanced...

We’re glad to show our new Pro10 body. As usual, we’ve make a good use of the drivers suggestion, and we’ve developed R10. The request was provide a body with a very good straight-line stability and, as well, plenty of front and rear downforce for a balanced feel. A “Gurney Flap” is provided in the mold to further tune the rear end grip, while the front end can be balanced...

As usual, we’ve make a good use of the drivers suggestion, and we’ve developed the R14. A new path for Pro10 bodies, with the use of the center of the body to create most of the downforce. The new way of design allow a minimal longitudinal flex of the body, improving the rigidity of the rear end. A “Gurney Flap” is provided in the mold to further tune the rear end grip. The...

As usual, we’ve make a good use of the drivers suggestion, and we’ve developed the R14. A new path for Pro10 bodies, with the use of the center of the body to create most of the downforce. The new way of design allow a minimal longitudinal flex of the body, improving the rigidity of the rear end. A “Gurney Flap” is provided in the mold to further tune the rear end grip. The...

The new way of design allow a minimal longitudinal flex of the body, improving the rigidity of the rear end. A “Gurney Flap” is provided in the mold to further tune the rear end grip. The body is made of strong yet lightweight 0.5mm polycarbonate and it will fit most 235mm pan cars The body will be delivered unpainted and uncut. No window masks included. Headlight stickers...

PhiGamma3 We’re extremely proud to introduce you our new Formula body Φγ3 (Phi-Gamma3) As the predecessor PhiGamma and PhiGamma2, the body is made out on 3D CAD with CFD validation. Phi-Gamma3 in intended to give the best result on typical "electric" circuit, giving to the model a nice amount of steering while still keeping a solid rear end, sidepods are shaped in order to...

Suitable for the Mistral - the FENIX Racing formula car.

Suitable for the Mistral - the FENIX Racing formula car. Perfect for Volante F1 tires, +1mm wider each side.

Suitable for the Mistral - the FENIX Racing formula car.

Suitable for 1:12 PanCar geardiff.

Suitable for 200mm PanCar geardiff.