Genuine Tamiya spares - maybe the best solution for your car!

Suitable for 1:10 touring 12mm hex 26mm width 0mm Offset Set of two pieces.

Suitable for 1:10 m-chassis 12mm hex 42mm total diameter Set of four pieces.

Suitable for 1:10 touring 12mm hex 26mm width Set of two pieces.

Suitable for 1:10 touring 12mm hex 26mm width 0mm Offset Set of two pieces.

TAKE CARE! It's NOT a complete rim. You will need 19335704 and screws to complete it.

Suitable for DT-02 and DT-03. Axle and ballhead are inluded. Take care: Right and left side are not the same.

Genuine Tamiya spares - maybe the best solution for your car!

Unpainted, not cut - no decals.

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine TRF420 part.

Suitable for bodies like the one from 47429

Genuine Tamiya spares and optionals - the best solution for your TRF!

Suitable for bodies like the one from 47429

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya TRF spare parts & optionals.

Not painted, not cut. Only the body. No wheels, no chassis, no accesoires! Please take care: - the body will be delivered BULK, which means without packaging It's not taken out of a car kit. So there are no pre-drilled holes or pre-cut wheel arches.

ONLY the body shell. Nothing else. Will fit only to Tamiya TA-02SW

Porsche 911 GT1 1996 Street CAUTION! Only 237mm Wheelbase! Not painted, not cut. Only the body. No wheels, no chassis, no decals, no wing! Already pre-drilled for TA-03RS. Will be delivered BULK, without box or bag.

Genuine Tamiya spares! Body will be delivered unpainted and not cut.

Genuine Tamiya spares! Body will be delivered unpainted and not cut.

Clear, unpainted and not cut.

WHITE version!

This model kit recreates the Porsche 935 Vaillant in 1/20 scale with new Cartograf decals, tires, and instruction manual. The original model (Item 20008) was sold in 1978 and this year is the 45th anniversary of the release of the model. Kremer Racing was established by Erwin Kremer and his brother Manfred and became known as a company which tuned Porsche 911s. Based on the...

Suitable for 1:10 touring 64mm outer diameter 47mm inner diameter 24mm width Set of two pieces.

Suitable for 1:10 touring 64mm outer diameter 47mm inner diameter 24mm width Set of two pieces.

Two types of stabilizers (super soft green, soft red) are included for front and rear, and bearings facilitate smooth movement.

This one-piece aluminium servo mount can be used instead of the kit-standard T8 part. More rigid servo attachment gives improved handling.

These rigid 3mm thickness carbon damper stays give more setup options compared to the standard plastic damper stays.

Genuine Tamiya silicone oil!

Genuine Tamiya silicone oil!

Genuine Tamiya screws!

ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE

These are 7mm suspension balls for use on the Tamiya TC-01 and TA-08 chassis. The balls are lighter than the standard steel balls, which help reduce un-sprung weight in the suspension system. • TA08 Low Friction King Pin Balls x4 • Use in place of 7mm suspension balls and king-pins. • Aluminum components (changed from kit-standard steel) feature a hard anodized finish to...

Here is a polycarbonate chassis cover set for the TT-02 chassis, useful to help prevent foreign objects from getting into the chassis interior even when running on sand and other tricky surfaces. • Inner fenders can be attached to the front. • Can be easily attached by touch fastener tape. • Compatible with TT-02 and TT-02FT chassis cars. • Chassis Cover x1 • Touch fastener...

Genuine Tamiya optionals!

Genuine Tamiya spare and optional parts! These universal shafts give great resistance to crashes, and facilitate efficient power transmission. Use on front and rear.

Genuine Tamiya spare and optional parts! This rigid alu differential nut allows precise adjustment of ball differentials, and a precision differential is included.

Genuine Tamiya spare and optional parts! These rigid alu servo stays offer secure attachment and sharp steering response.

Genuine Tamiya spare and optional parts! This set is useful not to only protect drivetrain from overload but also adjust traction during acceleration. Great for slippery surfaces.

Genuine Tamiya spare and optional parts! Use this rigid, precision aluminium steering bridge in place of the kit-standard part to provide more responsive steering even on tricky surfaces.

Genuine Tamiya spare and optional parts! Use this rigid, precision aluminium steering set in place of the kit-standard part to provide more responsive steering even on tricky surfaces.

Genuine Tamiya spare and optional parts! Use this rigid, precision aluminium steering set in place of the kit-standard part to provide more responsive steering even on tricky surfaces.

Genuine Tamiya spare and optional parts! Use this rigid, precision aluminium rocker arms in place of the kit-standard part for more direct damper feel.

Genuine Tamiya spare and optional parts! This stabilizer set heightens stability during cornering and features a choice of 2 (soft and hard) stabilder rods for front and rear (one for each).

Genuine Tamiya spare and optional parts! This suspension mount can be fitted with the seperate, resin bushings for suspension shafts, which allows fine-tuning of toe, tread and more

This Hop-Up Optiuon is for use with the Tamiya TA-08 4WD chassis. It replaces the front gear diff with a one-way, which facilitates the front wheels to roll freely under deceleration and braking. Under acceleration, the unit behaves like a direct coupler/spool. Compared to using a Direct Coupler/Spool or gear differential, the one-way unit allows your car to carry more speed...

This Hop-Up Option is for use with the TA08 PRO chassis, and its limited slip effect is especially useful when installed in the rear gearbox, for a highly stable drive. PRO-TIP: This option part is best suited where track grip conditions are especially low. It’s still best to use the oil-filled gear diff unit under high-grip track conditions.

This Hop-Up Option set is for use with Tamiya XV-02 and TT-02 chassis cars. The Ball Differential option provides your model more stable rear grip thanks to its limited slip differential effect compared to the standard oil-filled gear differential. Use this option part for loose surface conditions. • Differential Joint A & B x1 each • Ball Differential Ring Gear (39T) x1 •...

This Hop-Up Option set is for use with Tamiya XV-02 and TT-02 chassis cars. The Ball Differential option provides your model more stable rear grip thanks to its limited slip differential effect compared to the standard oil-filled gear differential. Use this option part for loose surface conditions. • Differential Joint A & B x1 each • Ball Differential Ring Gear (39T) x1 •...

se this Hop-Up Option set to allow superior acceleration on low-grip surfaces and improved stability under braking. The use of a front direct coupler (A.K.A spool) replaces the oil-filled gear differential, found in the XV-02 base kit. By eliminating the differential action, at the front of the car, the car will have more stable braking power and increased forward drive...

This is a new gear differential unit for use on the XV-02 and TT-02 chassis. When using it on the TT-02 chassis, it allows you to tune the differential action, for the front and rear, with the use of different viscosity oils. When using it on the XV-02, you can use it not only for the front and rear diffs, but also as a center oil-filled diff unit, which will give you even...

Replace the ring gear of the kit-standard differential gear unit with this spur gear to change it to a center differential setup, balancing front and rear wheel speeds for improved turning. • Center Diff Gear x1 • Differential Case x1 • Gasket x1 • Use this spur gear with Item 22049 as a center differential setup. • Compatible with XV-02 chassis cars. (Use with the...

This spring set is for use with XV-02 chassis rally car. Use this set to fine tune your rally car set-up depending on surface conditions. • Springs (soft, black) x2 • Springs (medium, gold) x2 *kit-standard • Springs (hard, silver) x2 • Length: 40mm. • Compatible with XV-02 chassis cars.

Use this Hop-Up Option set to change the dog-bone type propeller shaft found in the stock XV-02 chassis to a universal propeller shaft for increased stable, and efficient performance. • Aluminum Swing Shaft x1 • Input Shaft x1 • Cross Joint x1 • 2x9.8mm Shaft x1 • 3x2.5mm Grub Screw x1 • Propeller shaft and input shaft have a firm joint for easy maintenance. • Compatible...

This Hop-Up Option is for use with XV-02 chassis. It replaces the stock plastic piece. It is useful for precise center shaft positioning to ensure efficient power transmission. • Aluminum Spur Gear Holder x1 • This spur gear holder firmly holds spur gear for stable gear function. • Compatible with XV-02 chassis cars.

These are double cardan joint shafts. The drive shafts have two joint points, which facilitate smoother operation at higher operating angles and longer life. • 37mm Drive Shafts for Double Cardan Joint Shafts x2 • The same size as 37mm universal drive shaft. • Compatible with XV-02 chassis cars. Use with following Hop-Up Options. Item 42218：Axle Shaft for Double Cardan Joint...

Fine-tuning your rally car can with the use of this Option part can help dial in your car to the course. The suspension mount, designed for the Tamiya XV-02 chassis, made of aluminum, and incorporates resin bushings, which inserted in various positions, allow adjustment of toe and skid angles. By adjusting toe and skid angles, the handling of the XV-02 can be fined tuned...

Use this Hop-Up Option in place of the kit-standard plastic part (A19) to help absorb stress on the damper stay of your XV-02 chassis. It helps ensure stable performance, and even protect your car in unexpected crashes. • Aluminum Damper Stay Mount x1 • Compatible with XV-02 chassis cars. (Can be used either front or rear.)

This Hop-Up Option is for use with the XV-02 chassis. It’s a lightweight, rigid 3.5mm thickness carbon fiber damper stay (shock tower), which gives more setup options compared to the standard plastic damper stay. • Carbon Damper Stay (Front) x1 • 5mm Ball Connectors x4 • 3x10mm Hex Head Screws x4 • 5.5x2.0mm Spacers x2 • Gives more setup options with three damper attachment...