Two types of stabilizers (super soft green, soft red) are included for front and rear, and bearings facilitate smooth movement.

This one-piece aluminium servo mount can be used instead of the kit-standard T8 part. More rigid servo attachment gives improved handling.

Genuine Tamiya silicone oil!

Genuine Tamiya silicone oil!

Genuine Tamiya screws!

These are 7mm suspension balls for use on the Tamiya TC-01 and TA-08 chassis. The balls are lighter than the standard steel balls, which help reduce un-sprung weight in the suspension system. • TA08 Low Friction King Pin Balls x4 • Use in place of 7mm suspension balls and king-pins. • Aluminum components (changed from kit-standard steel) feature a hard anodized finish to...

Here is a polycarbonate chassis cover set for the TT-02 chassis, useful to help prevent foreign objects from getting into the chassis interior even when running on sand and other tricky surfaces. • Inner fenders can be attached to the front. • Can be easily attached by touch fastener tape. • Compatible with TT-02 and TT-02FT chassis cars. • Chassis Cover x1 • Touch fastener...

This ball differential is for use on the Tamiya TD4, TD2 and other chassis types. It can be used as a spare or as a quick set up change. Item Contents • Blue anodized aluminum differential nut, and carbon tool steel differential joints ensure high durability. • Precision differential screw and nylon lock included. • Differential spring • Thrust plates x2 • 1/16-inch steel...

Genuine Tamiya optionals!

Genuine Tamiya spare and optional parts! These universal shafts give great resistance to crashes, and facilitate efficient power transmission. Use on front and rear.

Genuine Tamiya spare and optional parts! This rigid alu differential nut allows precise adjustment of ball differentials, and a precision differential is included.

Genuine Tamiya spare and optional parts! These rigid alu servo stays offer secure attachment and sharp steering response.

Genuine Tamiya spare and optional parts! This set is useful not to only protect drivetrain from overload but also adjust traction during acceleration. Great for slippery surfaces.

Genuine Tamiya spare and optional parts! Use this rigid, precision aluminium steering bridge in place of the kit-standard part to provide more responsive steering even on tricky surfaces.

Genuine Tamiya spare and optional parts! Use this rigid, precision aluminium steering set in place of the kit-standard part to provide more responsive steering even on tricky surfaces.

Genuine Tamiya spare and optional parts! Use this rigid, precision aluminium steering set in place of the kit-standard part to provide more responsive steering even on tricky surfaces.

Genuine Tamiya spare and optional parts! Use this rigid, precision aluminium rocker arms in place of the kit-standard part for more direct damper feel.

Genuine Tamiya spare and optional parts! This stabilizer set heightens stability during cornering and features a choice of 2 (soft and hard) stabilder rods for front and rear (one for each).

Genuine Tamiya spare and optional parts! This suspension mount can be fitted with the seperate, resin bushings for suspension shafts, which allows fine-tuning of toe, tread and more

This Hop-Up Optiuon is for use with the Tamiya TA-08 4WD chassis. It replaces the front gear diff with a one-way, which facilitates the front wheels to roll freely under deceleration and braking. Under acceleration, the unit behaves like a direct coupler/spool. Compared to using a Direct Coupler/Spool or gear differential, the one-way unit allows your car to carry more speed...

This Hop-Up Option is for use with the TA08 PRO chassis, and its limited slip effect is especially useful when installed in the rear gearbox, for a highly stable drive. PRO-TIP: This option part is best suited where track grip conditions are especially low. It’s still best to use the oil-filled gear diff unit under high-grip track conditions.

Suitable for Tamiya Buggies. Size: 60-54-19-24 With 12mm hex hub.

This Hop-Up Option set is for use with Tamiya XV-02 and TT-02 chassis cars. The Ball Differential option provides your model more stable rear grip thanks to its limited slip differential effect compared to the standard oil-filled gear differential. Use this option part for loose surface conditions. • Differential Joint A & B x1 each • Ball Differential Ring Gear (39T) x1 •...

This Hop-Up Option set is for use with Tamiya XV-02 and TT-02 chassis cars. The Ball Differential option provides your model more stable rear grip thanks to its limited slip differential effect compared to the standard oil-filled gear differential. Use this option part for loose surface conditions. • Differential Joint A & B x1 each • Ball Differential Ring Gear (39T) x1 •...

se this Hop-Up Option set to allow superior acceleration on low-grip surfaces and improved stability under braking. The use of a front direct coupler (A.K.A spool) replaces the oil-filled gear differential, found in the XV-02 base kit. By eliminating the differential action, at the front of the car, the car will have more stable braking power and increased forward drive...

This is a new gear differential unit for use on the XV-02 and TT-02 chassis. When using it on the TT-02 chassis, it allows you to tune the differential action, for the front and rear, with the use of different viscosity oils. When using it on the XV-02, you can use it not only for the front and rear diffs, but also as a center oil-filled diff unit, which will give you even...

Replace the ring gear of the kit-standard differential gear unit with this spur gear to change it to a center differential setup, balancing front and rear wheel speeds for improved turning. • Center Diff Gear x1 • Differential Case x1 • Gasket x1 • Use this spur gear with Item 22049 as a center differential setup. • Compatible with XV-02 chassis cars. (Use with the...

This spring set is for use with XV-02 chassis rally car. Use this set to fine tune your rally car set-up depending on surface conditions. • Springs (soft, black) x2 • Springs (medium, gold) x2 *kit-standard • Springs (hard, silver) x2 • Length: 40mm. • Compatible with XV-02 chassis cars.

Use this Hop-Up Option set to change the dog-bone type propeller shaft found in the stock XV-02 chassis to a universal propeller shaft for increased stable, and efficient performance. • Aluminum Swing Shaft x1 • Input Shaft x1 • Cross Joint x1 • 2x9.8mm Shaft x1 • 3x2.5mm Grub Screw x1 • Propeller shaft and input shaft have a firm joint for easy maintenance. • Compatible...

This Hop-Up Option is for use with XV-02 chassis. It replaces the stock plastic piece. It is useful for precise center shaft positioning to ensure efficient power transmission. • Aluminum Spur Gear Holder x1 • This spur gear holder firmly holds spur gear for stable gear function. • Compatible with XV-02 chassis cars.

These are double cardan joint shafts. The drive shafts have two joint points, which facilitate smoother operation at higher operating angles and longer life. • 37mm Drive Shafts for Double Cardan Joint Shafts x2 • The same size as 37mm universal drive shaft. • Compatible with XV-02 chassis cars. Use with following Hop-Up Options. Item 42218：Axle Shaft for Double Cardan Joint...

Fine-tuning your rally car can with the use of this Option part can help dial in your car to the course. The suspension mount, designed for the Tamiya XV-02 chassis, made of aluminum, and incorporates resin bushings, which inserted in various positions, allow adjustment of toe and skid angles. By adjusting toe and skid angles, the handling of the XV-02 can be fined tuned...

Use this Hop-Up Option in place of the kit-standard plastic part (A19) to help absorb stress on the damper stay of your XV-02 chassis. It helps ensure stable performance, and even protect your car in unexpected crashes. • Aluminum Damper Stay Mount x1 • Compatible with XV-02 chassis cars. (Can be used either front or rear.)

This Hop-Up Option is for use with the XV-02 chassis. It’s a lightweight, rigid 3.5mm thickness carbon fiber damper stay (shock tower), which gives more setup options compared to the standard plastic damper stay. • Carbon Damper Stay (Front) x1 • 5mm Ball Connectors x4 • 3x10mm Hex Head Screws x4 • 5.5x2.0mm Spacers x2 • Gives more setup options with three damper attachment...

This Hop-Up Option is for use with the XV-02 chassis. It’s a lightweight, rigid 3.5mm thickness carbon fiber damper stay (shock tower), which gives more setup options compared to the standard plastic damper stay. • Carbon Damper Stay (Rear) x1 • 5mm Ball Connectors x4 • 3x10mm Hex Head Screws x4 • 5.5x2.0mm Spacers x2 • Gives more setup options with five damper attachment...

This metal bevel gear set is for use on the TD4 4WD chassis (Super Avante). It replaces the standard plastic gear, which will allow you to install motors with more power and torque. • TD4 20T Metal Bevel Gears x4 • These gears are molded in tough cast metal alloy, which enhance durability and facilitate transmission of greater power. • Compatible with Item 58507 (1/10 R/C...

These shock mount pivots allow you to more easily attach Tamiya Big Bore Dampers onto your TD2 chassis. • BB Mount Balls (S, black) x2 • φ6 Hex Head Ball Connectors x2 • Washers x2 • Use a kit-included 2mm hex wrench for attachment or detachment. • Compatible with TD2 chassis cars. (Not compatible with TD4 chassis cars.)

To be used with TT-02BR and 22049 Gear Diff.

To be used with TT-02BR and 22046 Ball Diff.

This Hop-Up Option included in the TT-02 Type-SRX Chassis Kit (Item 58720) is available separately for maintenance purposes. Use as spare parts for the TT-02 Type-SRX chassis, or as replacements for joint cups when using Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T) on the TT-02 chassis • TT-02 Type-SRX Front Direct Cup Joints x2 • TRF417 V5 Swing Shaft Cap (Item...

Genuine Tamiya optionals!

Suitable for 1:10 touring 12mm hex 24mm width Set of four pieces.

These are carbon steel dogbone shafts for use on the BB-01 off-road chassis. They are part of the universal drive line. Use them in place of the standard dogbones for increased durability. • Dogbone shafts x2 • Crafted in carbon tool steel. • Compatible with the BB-01 chassis.

These aluminum front steering uprights can be used to replace the standard resin/plastic uprights on the BB-01 off-road chassis. Aluminum uprights provide increased rigidity and sharper steering response compared to the standard part. • Silver-anodized aluminum front uprights x2 • Right and left side components feature the same symmetrical shape. • Compatible with the BB-01...

This aluminum servo stay can be used to replace the standard resin/plastic parts on the BB-01 off-road chassis. The aluminum servo stay provide increased rigidity and sharper steering response by firmly securing the steering servo in place compared to the standard plastic part. Furthermore, the aluminum stay is especially beneficial when using high torque servos. •...

Slipper clutches are an essential tuning part in off-road 2WD vehicles. They help protect the drivetrain from sudden surges and help tune the vehicle on slippery surfaces. This slipper clutch is specific to the BB-01 off-road chassis. • Gear-integrated shaft (20T) x1 • Slipper screw x1 • Plate A x1 • Plate B x1 • Slipper pads x2 • 1050 (10x5mm) ball bearing x1 • Spring seats...

This Hop-Up Option is for use with the XV-02 chassis. These precision, lightweight aluminum steering arms give secure attachment, as well as direct steering feel, superior durability, and smooth performance. • Aluminum Steering Arms Left & Right x1 each. • Features Tamiya blue anodized finish. • Features built-in ball bearings. • Compatible with XV-02 chassis cars.

This Hop-Up Option is for use with the XV-02 chassis. It is made of lightweight and rigid 2mm thick carbon fiber and serves as a bumper support that ensures more secure attachment of urethane sponge and body mount. • 2mm thickness carbon fiber bumper support x1 • Rubber bushings x2 • 6mm snap pins x2 • 3x16mm round socket screws x2 • Compatible with XV-02 chassis cars.

This sway bar Hop-Up Option is for use with the R/C XV-02RS PRO Chassis Kit. (Item 58726) The sway bar set can be used to adjust corning stability depending on surface conditions. • Stabilizers x2 (front and rear) • Stabilizer Rod Stopper x4 (Item 53827) • Stabilizer End 5mm Adjusters (4pcs.) x4 (Item 54870) • 4mm Adjuster (for 3mm Screws / 8pcs.) x4 (Item 51111) • 5x10mm...

This Hop-Up Option is for use with the XV-02 chassis. The carbon fiber-reinforced lower deck gives greater rigidity than the standard XV-02 lower deck and is great for use on surfaces such as carpet and high-grip asphalt. A higher rigidity chassis is best suited when you are driving your car on high traction surfaces. • Carbon Reinforced Lower Deck x1. • Use of Item 54232 M3...

This Hop-Up Option is for use with the XV-02 chassis and is mainly oriented for on-road performance. The lightweight, rigid 3.5mm thickness carbon fiber damper stays give more setup options compared to the standard plastic damper stays. • Carbon fiber damper stay (front) x1. • Carbon fiber damper stay (rear) x1. • Piston rods (30.5mm) x4 • 5x6.55mm ball connector nuts (blue)...

Genuine Tamiya TRF spare parts & optionals.

Genuine Tamiya TRF spare parts & optionals.

The TA08R Aluminum Motor Mount features aluminum upper deck mounts which allow for the attachment of an upper deck by 3x6mm countersunk hex head screws. With this option part you can easily take an existing TA-08PRO chassis and update its performance for more tuning options. • TA08R aluminum motor plate (3.0mm thick) x1 • Aluminum upper deck mounts x2 • 3x6mm countersunk hex...

The TA08R Carbon Upper Deck provides improved traction when accelerating. A 630-ball bearing located at the rear also ensures roll stability by keeping the deck flex characteristics consistent from left to right. • TA08R carbon upper deck (2.0mm thick carbon fiber) x1 • 630 (6x3mm) ball bearing x1 • 3x0.1mm shims x2 • 3x6mm hex head screws x6 • Compatible with the TA08 PRO...

These aluminum front upper arm mounts for the TA08PRO enhance bulkhead rigidity. • Aluminum front upper arm mount (left) x1. • Aluminum front upper arm mount (right) x1. • Features attachment points to attach separately sold Item 22082 TA08R Carbon Upper Deck (2.0mm Thick). • Allows easier attachment / detachment of upper arm ball connectors. • Compatible with the TA08 PRO...

These aluminum front upper arm mounts for the TA08PRO enhance bulkhead rigidity. • Aluminum front upper arm mount (left) x1. • Aluminum front upper arm mount (right) x1. • Features attachment points to attach separately sold Item 22082 TA08R Carbon Upper Deck (2.0mm Thick). • Allows easier attachment / detachment of upper arm ball connectors. • Compatible with the TA08 PRO...

These rear body mounts for use on the TA08 use 2.5mm carbon fiber bases and aluminum body mount posts. They limit body wobble and ensure stable rear traction. • Body mount bases (carbon fiber) x2 • Body mount posts (aluminum) x2 • 3x6mm hex head screws x2 • 3mm washers x2 • 7mm snap pins x2 • Body mount extensions (from Item 54604) allow adjustment of mount height according...

Tune up your chassis with these lightweight and durable titanium turnbuckle shafts which limit parts wear and help retain their shape. • 4x18mm titanium turnbuckle shafts x2 • Compatible with the TA08 PRO (Item 58693), TA08R (Item 47498) and TB Evo.8 (Item 42383) chassis. • NOTE: Requires 4 shafts for one kit

Use this 33T steel idler gear to enhance the drivetrain rigidity of the BB-01, TD4/TD2, and XV-01 chassis platforms. It replaces the stock plastic gear found in the base kits. • 33T steel idler gear x1 • Use in place of MA27 • Compatible with the BB-01, TD2/TD4 and XV-01 chassis.