X22 Motor Bearing 4x10x4mm - (2pcs)

X22 PreciSensor-Unit Will replace also the older unit 50623 when it should be sold out.

X22 Brass Endcover with cooling fins This new brass tuning part with cooling fins improves the heat dissipation significantly compared to the standard plastic endcover. Featured with laser engraved XTEC logo and A, B, C speedo cable connection, giving your motor a stylish look! Due to its special design the motor has better heat-dissipation and ventilation, resulting in a...

LRP 520521 - X22 Stock Spec Tuning Rotor - 12.3mm

X22 Stock Spec Rotor - 12.5mm

Suitable for X22 Stock Spec motors.

Typ: Brushless, Sensor Magnet Material: Sintered, 4-pole Coil: Multi-Slot Diameter: 41.5mm Length: 68.0mm Weight: 345g

Doublesided Tape Pads (10pcs) LRP releases the all new LRP double sided tape pads (10 pieces) for extremely strong securing of your electric equipment in your R/C car. Works perfect for any receiver, speed control, on/off switch or servo (1/18 models). This is the same extra thick and high-quality double sided mounting tape included with LRP speed controls. 10 pads, each...

You want to use a battery with 5mm but you have only 4mm on your ESC? No problem, use this adapters!

Spare part for LRP 4S LiPo. XH on both sides.

The Spin Pro offers all the features needed by competition beginners. More performance through ad-justable power modes and the adjustable autobrake function make the Spin Pro the perfect choice in hobby competition classes. Like all Spin speed controls, the Spin Pro is equipped with a switching BEC and a power capacitor with lowest internal resistance for best performance....

One of the best 1:8 scale brushless ESC! No limit, up to 600A / phase. Latest Version 2 from 2015!

The NEW LRP FLOW! Including software for modified and stock classes, including boos 0 - suitable for onroad and offroad - the very best ESC for ALL! The highlights: - 7 fully adjustable parameters for stock and modified - HD Pure Aluminium Case for lowest temperature - X-Brake Pro System - USB updateability - Temp Check System 3 (for ESC and engine!) - Bulletproof 6V / 3A...

Sensor-Wire HighFlex 150mm The high-flex sensor wires makes installation and usage in any R/C model smoother and more easy than ever before. Offered in 4 different lengths for optimised fit between the motor and speedo for any R/C model or electronics configuration.

Sensor-Wire HighFlex The high-flex sensor wires makes installation and usage in any R/C model smoother and more easy than ever before. Offered in different lengths for optimised fit between the motor and speedo for any R/C model or electronics configuration.

Sensor-Wire HighFlex The high-flex sensor wires makes installation and usage in any R/C model smoother and more easy than ever before. Offered in different lengths for optimised fit between the motor and speedo for any R/C model or electronics configuration.

Sensor-Wire HighFlex The high-flex sensor wires makes installation and usage in any R/C model smoother and more easy than ever before. Offered in different lengths for optimised fit between the motor and speedo for any R/C model or electronics configuration.

Sensor-Wire HighFlex The high-flex sensor wires makes installation and usage in any R/C model smoother and more easy than ever before. Offered in different lengths for optimised fit between the motor and speedo for any R/C model or electronics configuration.

Sensor-Wire HighFlex The high-flex sensor wires makes installation and usage in any R/C model smoother and more easy than ever before. Offered in different lengths for optimised fit between the motor and speedo for any R/C model or electronics configuration.

Speedo Fan 25x25x7mm (incl screws) Despite the flat construction, the airflow is extremely high. This cooling increases the speed control’s efficiency and performance significantly. The fan is the perfect addition to the SXX TC spec speedos.

Speedo Fan 30x30x7mm Improved cooling = higher performance! With the cooling fan for the iX8 and Flow, you get the maximum out of your speed control The high-performance cooling fan increases the speed control’s efficiency significantly.

Especially made for micro racing - 1/16 or 1/18. Brushed 35T 27.000 rpm @ 7.2V for 2S LiPo Type 370 (same as 300) 30mm length 24mm diameter 2.0mm motor shaft diameter

MuchMore CE-MPG - 3.5mm Motor Ceonnector Set - 3x Male + 3x Female

MuchMore ME-SHRP - FLETA Brushless Super High Response Program Card

If you are having trouble with the BEC of your MuchMore FLETA Euro V2 you should use this wire between ESC and receiver.

Aluminium Screw Set for Fleta ZX V2 Motors - Orange - (6pcs)

Aluminium Screw Set for Fleta ZX V2 Motors - RED - (6pcs)

FLETA ZX V2 Brushless Motor Rotor: sintered magnet balanced rotor Body: Full-Aluminium Cool Body with super size Air-Flow holes Timing-System: 0~45deg suitable for: 1/10 modified touring car

FLETA ZX V2 Brushless Motor specially for 1/12 All new stator design offers smooth acceleration. Rotor: sintered magnet balanced rotor Body: Full-Aluminium Cool Body with super size Air-Flow holes Timing-System: 0~45deg suitable for: 1/12 Pan Car

FLETA ZX V2 Brushless Motor Rotor: sintered magnet balanced rotor Body: Full-Aluminium Cool Body with super size Air-Flow holes Timing-System: 0~45deg suitable for: 1/10 modified touring car

17.5T - with adjustable Timing.

21.5T - with adjustable Timing.

Fixed Timing Version!

FLETA ZX V2 SPECTER - Brushless Motor 21.5T Muchmore Racing introduce “The Specter” the fastest stock motor ever produced. "Specter" Brushless Motor series based technology of the Muchmore Racing R&D team. World champion driver Marc Rheinard participating in the test, the driver can optimize the handling of development. And 1/10 Touring Car and Off-Road driver provides the...

FLETA ZX V2 SPECTER - Brushless Motor 25.5T Muchmore Racing introduce “The Specter” the fastest stock motor ever produced. "Specter" Brushless Motor series based technology of the Muchmore Racing R&D team. World champion driver Marc Rheinard participating in the test, the driver can optimize the handling of development. And 1/10 Touring Car and Off-Road driver provides the...

Body Scissor - Curved - Gold - Stainless

The NEW NOSRAM HD! What's new? - case, comdpletely made of aluminium - motor / battery wires, completely black coloured - short black coloured receiver wire - short black coloured switch wire - capaciator with a flat layout - new colour: BLACK Key-Features: - Exclusive Customized SUPER FETs - Heavy Duty 2.8mm 8-layer Powerboard - All new software - Bulletproof 6V/6A BEC -...

The NEW NOSRAM HD! What's new? - case, comdpletely made of aluminium - motor / battery wires, completely black coloured - short black coloured receiver wire - short black coloured switch wire - capaciator with a flat layout - new colour: BLACK Key-Features: - Exclusive Customized SUPER FETs - Heavy Duty 2.8mm 8-layer Powerboard - All new software - Bulletproof 6V/6A BEC -...

LRP Hall Sensor Level Converter - 200mm Due to not standardized Hall sensor signals there are some non-LRP motors which may not operate properly with the Flow X. This is because the Hall sensors of these motors raise the signals to a higher level than the Flow X can handle properly. When connecting such a motor to the Flow X, its start-up sequence may be interrupted and...

NOSRAM Hall Sensor Level Converter - 70mm Due to not standardized Hall sensor signals there are some non-LRP motors which may not operate properly with the Flow X. This is because the Hall sensors of these motors raise the signals to a higher level than the Flow X can handle properly. When connecting such a motor to the Flow X, its start-up sequence may be interrupted and...

N22 Brass Endcover with cooling fins This new brass tuning part with cooling fins improves the heat dissipation significantly compared to the standard plastic endcover. Featured with laser engraved XTEC logo and A, B, C speedo cable connection, giving your motor a stylish look! Due to its special design the motor has better heat-dissipation and ventilation, resulting in a...

As shown. For older ORCA brushless motors. Details unknown.

Versatility: Suitable for both SPEC and MOD 1S 1/12 LMP12 or Oval Racing Consistent Performance: Provides steady BEC current and voltage output Ultra-Small Footprint: Minimal space requirement with dimensions of 21mm x 12.9mm x 8.1mm Super Lightweight: Weighs only 6.3g, adding negligible weight to your setup High Current Output: Robust 8A output to meet demanding power needs...

The Bluconn Adapter by ORCA is compatible with ESCs, that can be programmed with the OE1 programm box. F.e.: OE1 OE1 WLE World Limited Edition OE1 Mark II OE1-1S OE1-1S Mark II OE1.2 2-4cells OE101 OE101S (1S) BP1001 Blink Pro Totem Totem-1S The adapter offers an easy and modern way to programm your ORCA ESC. The adapter connects wirelessly to your smartphone. The necessary...

Sensorwire - Silver - 120mm

Super Capacitor

The ORCA OE101 ESC Slim black is the latest speed controller from ORCA specifically designed for stock class racing. It is super small and leight weight and weighs only 20.8g and makes it so one of the lightest brushless speed controllers available. Dimensions: 30.45x30.35x10.35mm Weight: 20.8g Voltage Input: 6-11V Peak Current: 280A Continious Current: 100A Motor Limit:...

SETTINGS 1. Running Mode 2. Battery Cutoff Voltage 3. Punch 4. PWM Frequency 5. Dragbrake 6. Max. Brakeforce 7. Brake Punch 8. Brake PWM Frequency 9. Max. Reverse Force 10. Neutral Range 11. RPM Limit 12. Motor Link ETS Version - with preset 17.5T limit. SPECIFICATIONS Weight: 20.8g Dimensions: 30.45x30.35x10.35mm Inpout voltage: 6-11V Continuous current: 100A Peak current:...

The ORCA OE1.2 is a 2-4S capable brushless speed controller developed for high load categories. Its 200A continous current rating makes it perfect for 1/8 offroad and drag racing applications. The small dimensions of only 25.5x39.4x23mm make this speed controller an easy fit in most 1/8 cars while being capable of handling motors up to 2400kV. Technical Specifications:...

The ORCA Totem brushless esc is ORCA's latest stock spec Speed controller. It features a continous current rate of 100A, which is enough of up to 10.5T motors while using the included fan mounted on top of the esc. The 23.5g light Totem esc comes with reverse polarity protection and integrated capacitors for a even smaller footprint. Technical Specifications: Dimensions:...

SETTINGS 1. Running Mode 2. Battery Cutoff Voltage 3. Punch 4. PWM Frequency 5. Dragbrake 6. Max. Brakeforce 7. Brake Punch 8. Brake PWM Frequency 9. Max. Reverse Force 10. Neutral Range 11. RPM Limit 12. Motor Link ETS Version - with preset 21.5T limit. SPECIFICATIONS Weight: 20.8g Dimensions: 30.45x30.35x10.35mm Inpout voltage: 6-11V Continuous current: 100A Peak current:...

Features: 32 bit processor Low resistance FET ESC system: brushless Forward/Brake/Reverse (Factory preset: Forward/Brake) Dimensions: 30.54 x 34 x 13.75 mm WEight: 29.3g excluding wires Voltage input: 3.7 - 4.4V Peak Current: 760A Continuous current: 160A Motor Limit: Over 3.5T Motor Type: Sensored 540 sized brushless motors BEC: 8A - 6V/7V Internal Capacitors Polarity...

Dimensions: 29.5x29.7x17.6mm Weight: 22g (exclusive wires) Voltage Input: 6-12.6V (LiPo 2-3 Cells) Peak Current: 310A Continous Current: 80A Motor Limit: Over 10.5T Motor Type: 540 Sizes Brushless and Brushed motors BEC: 4A 6V/7V

Technical Specifications: Dimensions: 25.8x33.6x17.6mm Weight: 23.5g Voltage Input: 3-4.35V Peak Current: 380A Continous Current: 100A Motor Limit: Over 10.5T Motor Type: Sensored 540 sized brushless motors BEC: 3A | 6V-7V Multi Protection System: Yes

Features: Waterproof design: fully sealed for use in wet and harsh environments. Programming card: Easily customise settings for individual performance. Thermal protection: Prevents overheating and increases durability. Versatile applications: Ideal for crawlers, touring cars and more. Compact size: Fits easily into a variety of RC chassis. Specifikation: Motor type: Brushed...

Features: 32 bit processor Low resistance FET ESC system: brushless Forward/Brake/Reverse (Factory preset: Forward/Brake) Dimensions: 30,1 x 35 x 19,8 mm Weight: 43.3g excluding wires Voltage input: 6-9V Peak Current: 760A Continuous current: 160A Motor Limit: Over 3.5T Motor Type: Sensored 540 sized brushless motors BEC: 8A - 6V/7V Internal Capacitors Polarity Reverse...

The ORCA OE1 WLEB Blinky ESC is specifically designed for use in the Blinky stock class and offers an extremely low internal resistance thanks to its innovative technology. To achieve this performance level, the reverse polarity protection has been omitted. Additionally, a new variable PWM firmware is utilized, optimized for both throttle and braking. For the best possible...

Standard 540 size - will fit to 1:10 or 1:12 car. Suitable for 3.17mm pinions. Pictures are showing a 5.5T motor as example. Of course you'll get the motor version which is offered.

Standard 540 size - will fit to 1:10 or 1:12 car. Suitable for 3.17mm pinions.

Features: Fits: Mini-RC Material: Metal Colour: black Specification: Diameter: 27,85mm Overall length: 61,8mm Housing length: 47,95mm Shaft: 3,17mm KV: 4150 Turn: 10,5T Content: ORCA Runplus Sensored Brushless Motor Sensor wire 150mm TAKE CARE! This is NOT a 540 type motor. It's called 380 which means 16mm / 19mm distance for the mounting screws - instead of 25mm for a 540...