4-ch S-BUS 8.3g weight 35.1x23.2x12.5mm size TAKE CARE: It might happen that the box is already broken. They are very fragile and sometimes it is normal. No problem with the content of the box.

This is a low-profile digital servo that uses the S.BUS method for EP touring buggies and is compatible with UR mode. Features: Low profile Digital Servo for EP Touring Buggy Supports UR mode and SR mode S.BUS method Metal 2-4 gears Aluminum final gear Coreless motor Specs: Speed @ 6.0V: 0.10sec/60° Speed @ 7.4V: 0.08sec/60° Torque @ 6.0V: 6.6kg/cm Torque @ 7.4V: 8.0kg/cm...

0.15sec / 60° @ 4.8V 2.8kg/cm @ 4.8V 28x13x29.7mm 17.0g Plastic Gear NO ball bearings TAKE CARE: It might happen that the box is already broken. They are very fragile and sometimes it is normal. No problem with the content of the box.

Genuine Futaba spare parts for your futaba products!

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

Original SANWA spare part! The spare part was removed from an M17. This M17 was a demonstration / exhibition piece - so it was not in real operation. Nevertheless, traces of assembly in the factory and disassembly can of course be found in our company. SANWA offers some spare parts for sale - but not all of them. To ensure that the remote control does not become an unwanted...

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal, Steal operating voltage: dc6.0-8.4v operating speed (8.4v): 0.049 sec/60 degrees at no load stall torque (8.4v): 18.16kg.cm operating speed (7.4v): 0.056 sec/60 degrees at no load stall torque (7.4v): 16kg.cm operating speed (6.0v): 0.070 sec/60 degrees at no load stall torque...

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal, Seamless Steal operating voltage: dc5.0-8.4v operating speed (8.4v): 0.113 sec/60 degrees at no load stall torque (8.4v): 30kg.cm operating speed (7.4v): 0.115 sec/60 degrees at no load stall torque (7.4v): 28.4kg.cm operating speed (6.0v): 0.139 sec/60 degrees at no load stall...

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal, Seamless Steal operating voltage: dc5.0-8.4v operating speed (8.4v): 0.124 sec/60 degrees at no load stall torque (8.4v): 40kg.cm operating speed (7.4v): 0.131 sec/60 degrees at no load stall torque (7.4v): 33.1kg.cm operating speed (6.0v): 0.153 sec/60 degrees at no load stall...

Replacement gear set for Servo HXX101

Replacement gear set for Servo HXX110

Replacement gear set for Servo HXX118

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal, Steal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.073 sec/60 degrees at no load stall torque (8.4v): 19kg.cm operating speed (7.4v): 0.083 sec/60 degrees at no load stall torque (7.4v): 18kg.cm operating speed (6.0v): 0.095 sec/60 degrees at no load stall torque (6.0v):...

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Coreless Gear Type: Metal, Titanium operating voltage: dc4.8-8.4v operating speed (8.4v): 0.086 sec/60 degrees at no load stall torque (8.4v): 14kg.cm operating speed (7.4v): 0.095 sec/60 degrees at no load stall torque (7.4v): 13kg.cm operating speed (6.0v): 0.105 sec/60 degrees at no load stall torque...

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Coreless Gear Type: Metal, Steal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.135 sec/60 degrees at no load stall torque (8.4v): 32kg.cm operating speed (7.4v): 0.145 sec/60 degrees at no load stall torque (7.4v): 29kg.cm operating speed (6.0v): 0.160 sec/60 degrees at no load stall torque (6.0v):...

Replacement gear set for Servo HSX101

Replacement gear set for Servo HSX102

Replacement gear set for Servo HSX812

Replacement wire for HXX servos by H-Speed. Not soldering necessary, just switch the wire and have always the needed length.

Replacement wire for HXX servos by H-Speed. Not soldering necessary, just switch the wire and have always the needed length.

Replacement wire for HXX servos by H-Speed. Not soldering necessary, just switch the wire and have always the needed length.

Replacement wire for HXX servos by H-Speed. Not soldering necessary, just switch the wire and have always the needed length.

Replacement wire for HXX servos by H-Speed. Not soldering necessary, just switch the wire and have always the needed length.

Servo Wire JR - 50mm - BLACK

Servo Wire JR - 100mm - BLACK

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

Adjustable lenght (center to center) from 15-19mm.

Adjustable lenght (center to center) from 15-19mm.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...