Alu Servo Horn KO, JR, Sanwa, Airtronics - 23T CNC-machined alu servo horn with offset for use on steering servos. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm-linkage hardware. Two holes for linkage mounting allows quick & easy linkage angle change. Primarily recommended for...

Alu Servo Horn Hitec - 24T CNC-machined alu servo horn with offset for use on steering servos. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm-linkage hardware. Two holes for linkage mounting allows quick & easy linkage angle change. Primarily recommended for 1/10 and 1/8 on-road...

Alu Servo Horn Futaba - Offset - 25T - V2 CNC-machined alu servo horn with offset for use on steering servos. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm-linkage hardware. Two holes for linkage mounting allows quick & easy linkage angle change. Primarily recommended for 1/10...

ALU THROTTLE SERVO HORN KO PROPO - OFFSET - 23T

ALU THROTTLE SERVO HORN HITEC - OFFSET - 24T

ALU THROTTLE SERVO HORN FUTABA & SAVOX - OFFSET - 25T - V2

ALU THROTTLE SERVO HORN Kopropo, JR, Sanwa, Airtronics - OFFSET - 23T Length first hole: ca. 15.5mm Length second hole: ca. 19.5mm Total length: ca. 26.5mm

ALU THROTTLE SERVO HORN Hitec - OFFSET - 24T Length first hole: ca. 15.5mm Length second hole: ca. 19.5mm Total length: ca. 26.5mm

ALU THROTTLE SERVO HORN Futaba - OFFSET - 25T Length first hole: ca. 15.5mm Length second hole: ca. 19.5mm Total length: ca. 26.5mm

ALU SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - 23T V2 This article is a version 2 with 3 holes (--> picture)! V1 with 2 holes is discontinued.

ALU SERVO HORN - HITEC - 24T

ALU SERVO HORN - FUTABA & SAVOX - 25T - V2 This article is a version 2 with 3 holes (--> picture)! V1 with 2 holes is discontinued.

ALU THROTTLE SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - 23T

ALU THROTTLE SERVO HORN - HITEC - 24T

ALU THROTTLE SERVO HORN - FUTABA & SAVOX - 25T - V2

ALU THROTTLE SERVO HORN - KO PROPO,JR,SANWA,AIRTR.- 23T (M3 THREAD)

ALU THROTTLE SERVO HORN - HITEC - 24T (M3 THREAD)

ALU THROTTLE SERVO HORN - FUTABA & SAVOX - 25T (M3 THREAD) - V2

Alu Countersunk Servo Shim

Alu Countersunk Servo Shim

Alu Countersunk Servo Shim

Transmitter Screen Protector (SANWA MT-4, MT-4S) The pictured transmitter is not part of the delivery content.

SANWA MT-44 / MT-5 Transmitter Screen Protector (The pictured transmitter is not part of the delivery content.)

Steering Sponge Small 45x38x20mm Outer Diameter: 45mm Inner Diameter: 38mm Width: 20mm Because outside diameter got reduced, it makes quick remove easier and faster!!

SANWA M17 - Transmitter Screen Protector - Scratch Proof - Anti-Fingerprint - Ultra Clear - Water & Oil Repellent

Steering Sponge Big 50x38x20mm

oil & water resistant coating easy to clean scratch proof anti-fingerprint ultra clear fits Futaba 10PX and 7PX

Outer Diameter: 49mm Inner diameter: 40mm Width: 18mm

Suitable for KAVAN GO Servos starting with GO-10xx / 11xx / 12xx in their name.

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Standard Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.17 sec/60 degrees at no load stall torque (8.4v): 20.0kg.cm dimensions: 40x20x42.3mm weight: 63.0g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.085 sec/60 degrees at no load stall torque (8.4v): 45.0kg.cm dimensions: 40x20x37.50mm weight: 83.0g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.058 sec/60 degrees at no load stall torque (8.4v): 16.0kg.cm dimensions: 40.2x20.2x26.50mm weight: 57.2g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.100 sec/60 degrees at no load stall torque (8.4v): 60.0kg.cm dimensions: 40.2x20.2x29.50mm weight: 75.8g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.085 sec/60 degrees at no load stall torque (8.4v): 40.0kg.cm dimensions: 40x20x37.50mm weight: 79.0g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.070 sec/60 degrees at no load stall torque (8.4v): 20.0kg.cm dimensions: 40.2x20.2x26.50mm weight: 57.2g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.068 sec/60 degrees at no load stall torque (8.4v): 33.0kg.cm dimensions: 40x20x37.50mm weight: 66.0g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Standard Gear Type: Metal operating voltage: dc4.8-6.0v operating speed (6.0v): 0.21 sec/60 degrees at no load stall torque (6.0v): 7.5kg.cm dimensions: 40x20x40mm weight: 52.0g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.062 sec/60 degrees at no load stall torque (8.4v): 14.5kg.cm dimensions: 40.8x20.2x26.5mm weight: 57.2g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Coreless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.074 sec/60 degrees at no load stall torque (8.4v): 14.0kg.cm dimensions: 40x20.2x26.1mm weight: 48.0g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.07 sec/60 degrees at no load stall torque (8.4v): 20.0kg.cm dimensions: 40.8x20.2x26.5mm weight: 57.2g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.052 sec/60 degrees at no load stall torque (8.4v): 23.0kg.cm dimensions: 40x20x37.50mm weight: 78.0g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.055 sec/60 degrees at no load stall torque (8.4v): 20.0kg.cm dimensions: 40x20x37.50mm weight: 69.5g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.085 sec/60 degrees at no load stall torque (8.4v): 45.0kg.cm dimensions: 40x20x37.50mm weight: 83.0g horn gear spline: 25T

Replacement sponge for EX-NEXT. Measurements: ca. 48x18mm Fits all transmitters with those measurements.

For a smooth and high resolution steering.

Details of Set Master Unit EX-NEXT + KR-420XT receiver

Details of Set Master Unit EX-NEXT + 2x KR-420XT receiver

Replacement sponge for EX-NEXT. Measurements: ca. 45x18mm Fits all transmitters with those measurements.

Features Transmitter: EX-NEXT now in pearl black and with a new steering wheel design "XT Advanced Mode" and "XT Telemetry Mode" Incl. LCD Xpansion Unit 2 EXP-201 for controlling all new functions of the transmitter Compact and lightweight master unit Optimized throttle / brake lever for a direct feeling of control Optimized steering behavior for a long service life Features...

Features of the Transmitter: EX-NEXT now in pearl black and with a new steering wheel design Ergonomically designed for hand and fingers Best signal transmission in "Extended XT mode" Incl. LCD Xpansion unit 2 EXP-201 for controlling all new functions of the transmitter Compact and lightweight master unit Optimized throttle / brake lever for a direct feeling of control...

The stand unit allows to choose the right batteries and also changes the center of gravity and balance of the system. The pearl black lacquered surface creates a seamless transition to the actual remote control. The post can be swiveled out, so the transmitter stands easily on its own. For this the regular unit has to be removed prior. Please note that this set was designed...

Details of Set Master Unit EX-NEXT + KR-420XT receiver

Details of Set Master Unit EX-NEXT + KR-420XT receiver

Details of Set Master Unit EX-NEXT + KR-420XT receiver

Details of Set Master Unit EX-NEXT + KR-420XT receiver

Batterie Box KIY

KR-420XT Receiver Specification: - Dimensions: 30.9 x 18.4 x 13.5mm - Weight: 5.4g - Operation Voltage: 4.8 to 7.4V - Normal Modus, XT Modus, XT Telemetry Modus - Number of channels: 4 - Compatible for HCS. We recommend this version with the standard antenna lenght outdoor.

KR-420XT Receiver with short antenna Specification: - Dimensions: 30.9 x 18.4 x 13.5mm - Weight: 5.4g - Operation Voltage: 4.8 to 7.4V - Normal Modus, XT Modus, XT Telemetry Modus - Number of channels: 4 - Compatible for HCS.

Replacement antenna for the KR-451FHD receiver

Upper Case for RSx3 one10 Servo Replacement for 35029 and 35036 - case is the same, stickers are different.