KR-420XT Receiver with short antenna Specification: - Dimensions: 30.9 x 18.4 x 13.5mm - Weight: 5.4g - Operation Voltage: 4.8 to 7.4V - Normal Modus, XT Modus, XT Telemetry Modus - Number of channels: 4 - Compatible for HCS.

Replacement antenna for the KR-451FHD receiver

Upper Case for RSx3 one10 Servo Replacement for 35029 and 35036 - case is the same, stickers are different.

Auminium Gear Set for RSx one10 Servo

This smart BEC Stabilising Capacitor stabilises the voltage for your receiver and is especially important when running in racing classes that runs on a low level of voltage input, such as 4-cell 1/12th class. The new LRP BEC Stabilising Capacitor works for any receiver on the market, no matter if its FM or 2.4GHz receivers. Can be used in either electric or nitro models,...

Gear set incl. ball bearing and pins. TAKE CARE: This gear set does NOT fit the low profile servo. Please use O0003077 instead.

Gear set incl. ball bearing and pins.

Replacement Metal Gears for Servo HBL599 SL

Replacement Metal Gears for Servo HBL550L

Replacement Metal Gears for Servo HBL550LX

Recommened for: 1:10 Offroad / 1:8 GT / 1:8 Offroad / 1:8 Onroad Dimensions: 40x20x38.5mm Operating Voltage: 3.5-8.4 Volt Weight: 71.4g Motor: Brushless Motor, Made in Japan Gear: 25T Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 6.0V: 0.082sek / 18.0kg 7.4V: 0.066sek / 22.0kg 8.2V: 0.060sek / 24.0kg

Recommened for: 1:10 touring Offroad is also possible! Dimensions: 40x20x23.1mm Operating Voltage: 3.5-8.4 Volt Weight: 53.5g Motor: Brushless Motor, Made in Japan Gear: 25T Wire length: 180mm Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 4.8V: 0.10sec / 10.0kg 6.0V: 0.08sec / 13.3kg 8.4V: 0.07sec / 16.8kg...

Recommened for: 1:10 Touring. Offroad is also possible! Dimensions: 40.5x20.5x25.4mm Operating Voltage: 3.5-8.4 Volt Weight: 58.5g Motor: Brushless Motor, Made in Japan Gear: 25T Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 4.8V: 0.13sec / 10.4kg 6.0V: 0.10sec / 13.0kg 8.4V: 0.08sec / 16.0kg

Recommened for: 1:10 Offroad Onroad is also possible! Dimensions: 40.5x20.5x23.1mm Operating Voltage: 3.5-8.4 Volt Weight: 53.5g Motor: Brushless Motor, Made in Japan Gear: 25T Wire length: 180mm Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 4.8V: 0.14sec / 16.0kg 6.0V: 0.11sec / 18.0kg 8.4V: 0.09sec / 23.0kg...

Recommened for: 1:10 Offroad Onroad is also possible! Dimensions: 40.5x20.5x26.4mm Operating Voltage: 3.5-8.4 Volt Weight: 57.8g Motor: Brushless Motor, Made in Japan Gear: 25T Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 4.8V: 0.13sec / 10.4kg 6.0V: 0.10sec / 13.0kg 8.4V: 0.08sec / 16.0kg

HV50P was developed by MKS servo and Max Mächler who is the European stock champion and MKS factory team driver. HV50P could be installed directly without any modification (Pin to Pin) Higher accuracy and dead band, and higher torque, smooth cornering and controlling Reduced weight for 5~10% (3~5g), faster acceleration and less centrifugal force Strong all metal gear and...

The servo arm plays an important role of the overall handling and feeling of your steering inputs. Strength of the material and even more the height from the ball stud to the servo spline are key points for the best performance. We created the MXLR Adjustable Alloy Servo Arm to offer you a strong and reliable height adjustable servo arm which stands the highest competition...

The servo arm plays an important role of the overall handling and feeling of your steering inputs. Strength of the material and even more the height from the ball stud to the servo spline are key points for the best performance. We created the MXLR Adjustable Alloy Servo Arm to offer you a strong and reliable height adjustable servo arm which stands the highest competition...

The Noise Killer is a capacitor that'll be attached to the receiver directly. It levels voltage spikes that the ESC with its BEC can't handle. This prevents an undervoltage on the receiver and therefore a breakdown.

S15-XP Torque(6.0V): 11.5 kg-cm (159.7 oz/in) Torque(7.4V): 15.0 kg-cm (208.3 oz/in) Torque(8.4V): 16.5 kg-cm (229.1 oz/in) Speed: 0.072 sec (6.0V) │ 0.060 sec (7.4V) │ Speed: 0.050 sec (8.4V) Operating Voltage：6.0 ~ 8.4 DC Volts Weight: 55.0 g (1.94 oz) Bearing Type：Ball Bearing x 2 Motor Type：Brushless Motor Gear Type：Titanium & Steel Operating Temperature: -20℃~60℃...

Radiolink R6F 2.4GHz is a 6-channel FHSS receiver with frequency hopping, which is compatible with the Radiolink transmitters for RC cars RC4GS, RC6GS and transmitters for aircraft T8FB and T8S. It can work with both standard power supply servos and "high-voltage" servos (HV). The receiver is suitable for RC cars, tanks and other land vehicles and RC ships (the range...

5-channel computer RC steering wheel set Radiolink with FHSS 2.4GHz telemetry transmission system for recreational models of cars and ships. With the R6F FHSS receiver included in the set, you have 5 PWM channels for classic servos without telemetry. The RC4GS V3 transmitter can also be used with the R6FG receiver with built-in gyro or the R8EF and R8FM flight receivers...

7-channel computer RC steering wheel set Radiolink with FHSS 2.4GHz telemetry transmission system for recreational models of cars and ships. With the R7FG FHSS receiver included in the set (with built-in gyro) you have 7 PWM channels for classic servos without telemetry. The RC6GS V3 transmitter can also be used with the R6F or R6FG receiver with built-in gyro or R8EF and...

8-channel computer pistol-grip RC set RadioLink using a FHSS 2.4GHz transmission system for model cars and boats. With the R8FG FHSS telemetry receiver included in the set, you have 8 PWM channels for conventional servos plus a built-in gyro. The RC8X transmitter can also work with the R6F and R6FG 6-channel receivers with built-in gyro, the R4FGM and R4F 4-channel...

Input (V): 6.0V - 7.4V Speed (sec/60°), 6.0V: 0.14 Speed (sec/60°), 7.4V: 0.12 Torque (kg-cm), 6.0V: 6.0 Torque (kg-cm), 7.4V: 7.0 Dimensions: 40.8x20.1x38.0mm Weight (g): 52g Spline: 25

Input (V): 5.0 - 7.4 Speed (sec/60 deg., 5.0V): .14 Speed (sec/60 deg.,7.4V): .12 Torque (kg-cm/oz-in), 5.0V: 21.2/294.4 Torque (kg-cm/oz-in),7.4V: 25.0/347.2 Dimensions (mm): 40x20x40.5 Weight (g): 67

Input (V): 4.8 - 8.6 Motor: Brushless Speed (sec/60deg.) 6.0V: .148 Speed (sec/60deg.) 7.4V: .133 Speed (sec/60deg.) 8.4V: .118 Torque (kg-cm/in-oz) 6.0V: 37.2/517 Torque (kg-cm/in-oz) 7.4V: 44.2/614 Torque (kg-cm/in-oz) 8.4V: 50.1/696 Dimensions (mm): 40 x 20 x 37.5 Weight (g): 82 Spline: 25

50mm Servo Wire Extension - black

75mm Servo Wire Extension - black

125mm Servo Wire Extension - black

175mm Servo Wire Extension - black

The Aluminium Steering Wheel for the popular Sanwa M17 high-end and MT-44 intermediate level radios is a quick and easy way to personalise your transmitter to the maximum. Machined from high-quality aluminium the steering wheel is of a cool new turbine design that greatly enhances the overall appearance of the transmitter while offering improved stability for more precise...

The Aluminium Steering Wheel for the popular Sanwa M17 high-end and MT-44 intermediate level radios is a quick and easy way to personalise your transmitter to the maximum. Machined from high-quality aluminium the steering wheel is of a cool new turbine design that greatly enhances the overall appearance of the transmitter while offering improved stability for more precise...

The Aluminium Steering Wheel for the popular Sanwa M17 high-end and MT-44 intermediate level radios is a quick and easy way to personalise your transmitter to the maximum. Machined from high-quality aluminium the steering wheel is of a cool new turbine design that greatly enhances the overall appearance of the transmitter while offering improved stability for more precise...

The Aluminium Steering Wheel for the popular Sanwa M17 high-end and MT-44 intermediate level radios is a quick and easy way to personalise your transmitter to the maximum. Machined from high-quality aluminium the steering wheel is of a cool new turbine design that greatly enhances the overall appearance of the transmitter while offering improved stability for more precise...

The Aluminium Steering Wheel for the popular Sanwa M17 high-end and MT-44 intermediate level radios is a quick and easy way to personalise your transmitter to the maximum. Machined from high-quality aluminium the steering wheel is of a cool new turbine design that greatly enhances the overall appearance of the transmitter while offering improved stability for more precise...

The Aluminium Steering Wheel for the popular Sanwa M17 high-end and MT-44 intermediate level radios is a quick and easy way to personalise your transmitter to the maximum. Machined from high-quality aluminium the steering wheel is of a cool new turbine design that greatly enhances the overall appearance of the transmitter while offering improved stability for more precise...

The Aluminium Dial and Nut Set for the popular Sanwa M17 high-end radio is a quick and easy way to personalise your transmitter to the maximum. The dials and hoop retaining nut are machined from high-quality aluminium and of a serrated design for better gripping and improved haptics. The Dial and Nut Set is available in seven different colours including black, blue, light...

The Aluminium Dial and Nut Set for the popular Sanwa M17 high-end radio is a quick and easy way to personalise your transmitter to the maximum. The dials and hoop retaining nut are machined from high-quality aluminium and of a serrated design for better gripping and improved haptics. The Dial and Nut Set is available in seven different colours including black, blue, light...

The Aluminium Dial and Nut Set for the popular Sanwa M17 high-end radio is a quick and easy way to personalise your transmitter to the maximum. The dials and hoop retaining nut are machined from high-quality aluminium and of a serrated design for better gripping and improved haptics. The Dial and Nut Set is available in seven different colours including black, blue, light...

The Aluminium Dial and Nut Set for the popular Sanwa M17 high-end radio is a quick and easy way to personalise your transmitter to the maximum. The dials and hoop retaining nut are machined from high-quality aluminium and of a serrated design for better gripping and improved haptics. The Dial and Nut Set is available in seven different colours including black, blue, light...

The Aluminium Dial and Nut Set for the popular Sanwa M17 high-end radio is a quick and easy way to personalise your transmitter to the maximum. The dials and hoop retaining nut are machined from high-quality aluminium and of a serrated design for better gripping and improved haptics. The Dial and Nut Set is available in seven different colours including black, blue, light...

The Aluminium Dial and Nut Set for the popular Sanwa M17 high-end radio is a quick and easy way to personalise your transmitter to the maximum. The dials and hoop retaining nut are machined from high-quality aluminium and of a serrated design for better gripping and improved haptics. The Dial and Nut Set is available in seven different colours including black, blue, light...

The Aluminium Dial and Nut Set for the popular Sanwa M17 high-end radio is a quick and easy way to personalise your transmitter to the maximum. The dials and hoop retaining nut are machined from high-quality aluminium and of a serrated design for better gripping and improved haptics. The Dial and Nut Set is available in seven different colours including black, blue, light...

M3x6mm Titanium Servo Mounting Screw (4 pieces)

Hole spacing: 15.5mm Fits: Ruddog Products, SAVÖX, Reedy etc.

Hole spacing: 15.5mm Fits: SANWA, JR

Hole spacing: 20mm Fits: Ruddog Products, SAVÖX, Reedy etc.

Hole spacing: 20mm Fits: SANWA, JR

Hole spacing: ca. 15mm Fits: Ruddog Products, SAVÖX, Reedy etc.

Hole spacing: ca. 15mm Fits: SANWA, JR

Length: 30mm Thickness: 3mm Height: 6mm M3 threads 1. hole: 16mm 2. hole: 20mm

Aluminium Offset Servo Horn 25T Black The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 23T black The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 25T orange The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 23T orange The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Horn 25T Blue The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 23T blue The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Horn 25T Red The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 23T red The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...