Products from Exotek
Verantwortlicher nach GPSR – person responsible GPSR:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
Hersteller – manufacturer:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
No results were found for the filter!
Exotek 1922 - Team Losi TLR 8ight-XE - HD Steering Crank Set Alu 7075
Polished black finish with silver chamfer construction for heavy duty race use, reduces the chance of stripped screws coming loose in a race. Always use blue thread lock and do not over tighten the screws. Some pictures show the set in...
€46.99
*
currently 3x in stock
Exotek 1923 - Team Losi TLR 8ight-XE - Cooling Motor Mount with Fan Mount - Alu 7075
The 7075 alloy construction offers improved motor cooling, because the stock rubber gaskets are removed. Therefore the motor heat can directly transfer through the mounts and into the chassis. In addition, a fan bar is included that...
€62.99
*
currently 1x in stock
Exotek 1924 - Team Losi TLR 8ight-XE - HD Center Bulkhead Set with Carbon Upper Plate
Includes the Carbon fiber top brace. The alloy construction maintains proper gear mesh for longer gear life and reduces the chance of stripped screws coming loose in a race. Uses the stock hardware. Always use blue thread lock and do not...
€57.99
*
currently 4x in stock
Exotek 1925 - HotBodies E819 - HD Servo Mount Alu 7075 black/orange
Lightweight yet high strength 1 piece design for reliable servo mounting. Polished and anodized in black with custom orange chamfers. Compatible with: Hot Bodies Racing E817 V2 Hot Bodies Racing E819
€29.99
*
currently 8x in stock
Exotek 1926 - HB D819/E819 - HD Bearinged Steering Crank Set - Alu 7075 - black/orange
In cludes bearings and crush sleeves to convert the buggies steering to be bushing free for long wear and sloplessness. Compatible with: - HB Racing D819 - HB Racing E819 - HB Racing D8 - HB Racing D812 - HB Racing D815 - HB Racing D817...
€42.99
*
currently 2x in stock
Exotek 1927 - HB D819/E819 - HD Steering Brace Plate - Alu 7075 - black/orange
Heavy duty 7075 machined alloy steering brace plate for the Hot Bodies D819, E819, D817, E817 series of buggies and trucks. Compatible with: - HB Racing D819 - HB Racing E819 - HB Racing D815 - HB Racing D817 - HB Racing D817 V2 - HB...
€29.99
*
currently 6x in stock
Exotek 1929 - HotBodies D819 - HD Clamping Spring Perch Set Alu 6061 with screws (4 pieces)
Rugged design for reliable spring holding that withstands those hard impacts and tumbles at the big race. Compatible with: Hot Bodies Racing 817 and 819 series of buggies and trucks
€32.99
*
currently 8x in stock
Exotek 1931 - Kyosho RB7 - Rear Laydown Bulkhead - Alu 7075 - black/red
Machined 7075 alloy construction means repeated secure mounting and no stripped nylon threads that change camber after big hits. Matches the stock geometry and includes mounting points for the RB7 sway bars (use blue thread lock for the...
€26.99
*
currently 7x in stock
Exotek 1932 - STUTTGART 1/10 MINI RACE BODY, FOR 225MM WHEELBASE 4WD MINI CARS
Nothing is grander than a fine classic car that has been refabricated into a modern handling super car. Introducing the Stuttgart 225wb mini chassis 'super car' body. With it's wide body fenders, aggressive front splitter, low side...
€38.99
*
currently 16x in stock
Exotek 1935 - Associated B74 - HD Steering Rack - Alu 7075 - black/blue
Updated rack corrects the excess bump steer found in the stock steering rack. The rack allows the inner ball link to be positioned higher (up to 4mm higher) so that you can add the correct amount of shims to get the correct zero bump...
€19.99
*
currently 9x in stock
Exotek 1936 - Associated B74 - HD Steering Cranks - Alu 7075 - black/blue
Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts. And the alloy construction insures precise steering input and heavy duty long lasting performance. Some...
€24.99
*
currently 12x in stock
Exotek 1937 - Associated B74 - HD Rear Hub Set - Alu 7075 - black/blue (1 Pair)
Heavy duty design maintains your suspension geometry setting race after race. The set includes set screws to tighten down the stock hinge pin inserts. Customized polished black base with blue chamfered accents goes great with your stock...
€38.99
*
currently 5x in stock
Exotek 1938 - Associated B74 - HD Rear Hub Link Mount - Alu 7075 - black/blue (1 Pair)
Polished black base with blue chamfered accents goes great with your stock or after market B6.2 and B74 parts. The second picture shows the hub link mounts in build in condition to show the usage - this picture also shows the not...
€18.99
*
currently 6x in stock
Exotek 1939 - Traxxas 2WD Slash - Eliminator Spur Mount for 2WD Slash Spurs
Heavy duty yet light weight slipper eliminator spur gear mounting hub for all 1/10 Traxxas 2WD Slash and Bandit buggies and trucks. Only weighing 3gr - this mount deletes the slipper components and cuts out about 10gr. Great for speed...
€17.99
*
currently 1x in stock
Exotek 1940 - Traxxas 2WD Slash - Eliminator Pro Spur Mount for Flite Spurs
Heavy duty yet light weight slipper eliminator spur gear mounting hub for all 1/10 Traxxas 2WD Slash and Bandit buggies and trucks. Only weighing 2.7gr - this mount deletes the slipper components, cuts out about 10gr. and allows greater...
€18.99
*
currently 7x in stock
Exotek 1941 - Associated DR10 - Front HD Bulkhead Alu 7075
Great looking and solid mounting of your front suspension. Includes set screws to hold the hinge pins. Use blue thread and do not over tighten hardware.
€24.99
*
currently 2x in stock
Exotek 1942 - Associated DR10/B5 - Slipper Eliminator Pro Spur Mount
Machined alloy unit that weighs only 3.4gr with the screws. Uses a wider range of available spur gear sizes by Exotek, Kimbrough, etc. Allows for easy switching between a locked spur or the stock slipper as track conditions warrant. Uses...
€16.99
*
currently 7x in stock
Exotek 1943 - Associated DR10/DB10 - Steering Rack - Alu 7075 - Blue
Heavy duty steering rack for the DR10, DB10, B5 based AE trucks and buggies. Precision machined, polished and anodized in team AE blue for that factory racing look.
€18.99
*
currently 7x in stock
Exotek 1944 - Associated DR10 - Titanium Rear CVA Axles (1 pair)
Super light titanium axle set for the DR10 drag racer. Reduces the weight and rotating mass of your driveline for quicker acceleration. Over 40% lighter than the stock steel axles at only 3.7gr each. *For drag racing only*
€28.99
*
currently 9x in stock
Exotek 1945 - Losi 22 - Titanium Rear CVA Axles, Lightweight for Drag Racing only (1 pair)
Super light titanium axle set for the TLR22 series of 1.0-5.0 buggies (not for the 5.0 Elite VHA axles and hubs). Reduces the weight and rotating mass of your driveline for quicker acceleration. Over 40% lighter than the stock steel...
€26.99
*
currently 1x in stock
Exotek 1946 - Losi 22 - Servo Horn F/25 - Alu 7075 - with 3mm Ball Threads
Specially designed heavy duty clamping servo horn matches the dimensions of the new stock 22 series servo horn (3mm style ball stud) so now you have great fit and geometry for robust steering and performance. Perfect replacement for all...
€13.99
*
currently 4x in stock
Exotek 1947 - P1-Z - GT Body 190mm 1/10
P1-Z USGT approved! The legendary 6X USGT National winning body returns with a new name but with the same great looks and handling! 1/10 GT body with an aggressive splitter, flared fenders, low slung hood, downforce inducing side skirts...
€39.99
*
currently 9x in stock
Exotek 1948 - Associated 1/10 - HD Servo Horn - Alu 7075 - F/25 - black/blue
Direct replacement for all Associated 1/10 vehicles. Also excellent for other 1/10 brand models- just check our dimensions above for compatibility. Polished and anodized in factory blue and black and laser etched for easy reference....
€15.99
*
currently 9x in stock
Exotek 1949 - Associated B6.2 - HD Front Wing Mount, Alu 7075, black/blue
Extra durable but machined to be lightweight (4gr) and uses the stock hardware to mount your wing. Stealthy black polished base with blue chamfered accents goes great with your stock plastic parts or after market blue parts. Some...
€18.99
*
currently 5x in stock
Exotek 1950 - Associated B6.2 - HD Fan Mount Alu 7075, black/blue
Direct bolt on with less flex and stronger fan mounting. Glossy black with a factory blue chamfer and only weighs about 1gr. Some pictures show the part in build-in condition to show off the usage.
€15.99
*
currently 7x in stock
Exotek 1951 - PanCar / F1 / 1/12 - Ride Height Gauge - Long Reach Style
Long reach style ride height gauge makes for much easier ride height measurements for pan car style chassis cars. The longer reach helps to clear the lipo and side links so that the ride height is not skewed by the gauge hitting the lipo...
€18.99
*
currently 3x in stock
Exotek 1953 - Losi 22 5.0 - Titanium Hinge Pin Set - Stock Buggy only
Machined precision lightweight premium titanium hinge pin set for the TLR 22 series 2wd buggies. At only 11gr this pin set is almost half the weight of the stock pins. Full set of hinge pins for the front and rear inner and outer arms....
€41.99
*
currently 9x in stock
Exotek 1954 - Losi 22/Kyosho RB7 - Carbon Body Mount Plate Rear
Carbon fiber rear body mount plate that attaches to the stock wings mounts of TLR22 and RB7 series wing mounts using the stock screws and stock wing buttons. Strong 2.5mm glossy carbon fiber offers lightweight yet secure mounting of full...
€15.99
*
currently 1x in stock
Exotek 1955 - Losi 22 SCT - Body Mount Set Rear Alu 7075 - for Drag and SC Bodies
Simpler, stronger, lighter body mounting system for the rear of the 22SCT 3.0 or 22 buggies converted with street drag bodies. The mounts line up with the stock shock tower holes and attache directly to your quick change shock posts and...
€27.99
*
currently 1x in stock
Exotek 1956 - Associated B5 - Rear Hub Set Alu 7075 - blue (1 pair)
The updated design works as either the legt or right hub (hubs are non-directional) and also allows for adjusting the wheelbase as needed using the supplied spacers. The upright ball stud mounting matches the stock roll center height....
€35.99
*
currently 3x in stock
Exotek 1957 - Asso B6/XRAY XB2 - Carbon Body Mount Plate Rear
Carbon fiber rear body mount plate that attaches to the stock wings mounts of B6 and XB2 series wing mounts using the stock screws and stock wing buttons. Strong 2.5mm glossy carbon fiber offers lightweight yet secure mounting of full...
€15.99
*
currently 10x in stock
Exotek 1958 - Associated B74 - HD Wing Mount, Alu 7075 - black/blue
Weighs only 11gr and keeps your wing aligned and pointed straight and looks good while doing it with its black and blue finished design. Works with the stock wing spacer and wing hardware. Includes required m3x16 screws. Some pictures...
€32.99
*
currently 5x in stock
Exotek 1959 - Associated B6.2 - Alu 7075 Rear Hub Set - black/blue
Heavy duty design maintains your suspension geometry setting, race after race and includes set screws to tighten down the stock hinge pin inserts. Customized polished black base with blue chambered accents goes great with your stock or...
€39.99
*
currently 6x in stock
Exotek 1960 - Associated B6.2 - Wheelie Bar Set adjustable
Extends from 9.5" to 11.75" (axle to axle) to match your race event rules. The longer bar gives you more stability, for straighter and faster passes without needing to let off the throttle as often. You are able to finely adjust the...
€57.99
*
currently 3x in stock
Exotek 1962 - Associated DR10 - Wheelie Bar Set 12" Carbon and alloy - adjustable
The longer bar gives you more stability than the short stock wheelie bar - for straighter and faster passes without the need of letting off of the throttle as much. You are able to adjust it at the base, using the stock DR10 adjustments,...
€57.99
*
currently 1x in stock
Exotek 1963 - F1 ULTRA R4 / R5 - HD Wing Mount Alloy and CF - Set
7075 alloy with 4mm carbon fiber assembly that stiffens the rear wing mounting and tricks your F1 out with custom factory looks.
€26.99
*
currently 11x in stock
Exotek 1965 - F1 ULTRA R4 / R5 - Front Spacer Set - CF Ride Height Spacers (3 pieces)
Stack them as needed to achieve your needed ride height. Includes: 2 pieces - 1mm thick 1 piece - 2.5mm thick
€15.99
*
currently 20x in stock
Exotek 1968 - F1 ULTRA R4 / R5 - Brass Wing Mount - 10g
Adds 10g to the rear wing for improved low speed rear grip. Black glossy coated and bolts directly to the F1 ULTRA wing struts.
€16.99
*
currently 12x in stock
Exotek 1969 - Team Losi 22 5.0 - HD Steering Crank Set Alu 7075
Polished black finish with silver chamfer construction for heavy duty race use. Matches the stock geometry.
€22.99
*
currently 9x in stock
Exotek 1970 - Team Losi 22 5.0 - HD Steering Drag Link Rack Alu 7075
Drop in replacement heavy duty drag link for the 22 5.0 series of buggies. Factory black with polished silver cut chamfer for heavy duty race use, reduces the chance of stripped screws coming loose in a race. Matches the stock geometry....
€14.99
*
currently 9x in stock
Exotek 1971 - Team Losi 22 - Slipper Eliminator Spur Mount for Kimbrough Spurs
The ultra-light direct spur gear mount is back for the Team Losi 22 series! For use with 22 1.0 through 5.0 slipper type layshafts (NOT for the 22S SCT). Machined alloy unit that weighs only 3.4gr with the screws. Uses a wider range of...
€15.99
*
currently 6x in stock
Exotek 1972 - Associated DR10 - HD Steering Crank Set, Alu 7075 - blue
The servo ball mount is reinforced to resist bends, as seen in other brand cranks. Gives you a more direct steering feel with less steering bounce.
€30.99
*
currently 2x in stock
Exotek 1973 - Associated DR10 - HD Carbon Rear Body Mount +24mm back
The mount moves the stock body posts back 24mm to help move the body posts out of the rear window of most bodies, such as Nova. The extra stiff plate also reduces body flex and body bouncing for better stability. Still allows adjustable...
€17.99
*
currently 4x in stock
Exotek 1975 - Associated DR10 - HD Servo Mount, 7075 - 1 piece design
Makes for easier servo install and removal thanks to the 1 piece design that will always match the chassis holes.
€18.99
*
currently 1x in stock
Exotek 1976 - Associated DR10 - Titanium Front Axles (1 Pair)
At only 4.5g per pair, these axles are perfect for reducing rotation mass for quicker acceleration. Rounded and angled hex profile also makes wheel installation extra quick and easy.
€27.99
*
currently 2x in stock
Exotek 1977 - Associated DR10 - Rear Clamping Hex, Alu 7075 (1 pair)
Looser steel cross pin tolerance allows you to tighten the wheel nuts without binding the bearings. The hexes do not lock onto the bearings, unlike the stock plastic hexes. Includes heavy duty M2 alloy steel screws for the clamping (do...
€15.99
*
currently 1x in stock
Exotek 1978 - Traxxas Slash - Wheelie Bar Set - Single Wheel - 12" legal
Extends from 9.5" to 12.5" (axle to axle) to match NPRC race class rules. The longer bar gives you more stability, for straighter and faster passes without needing to let off the throttle as often. You are able to finely adjust the wheel...
€57.99
*
currently 2x in stock
Exotek 1979 - Traxxas Slash Bandit - Titanium Front Axles (1 pair)
At only 5.8g per pair (stock axles with alloy hexes are about 12g a pair) these axles are perfect for reducing rotating mass for quicker acceleration. One piece machined axle with hex helps the tires run more true and balanced that's...
€27.99
*
currently 1x in stock
Exotek 1980 - Traxxas Slash - WHEELIE LADDER BAR SET, 2 WHEELS, CF ADJUSTABLE
Constructed of heavy duty 2.5mm thick carbon fiber with 4 alloy posts, 2 alloy ball bearing raced wheels and alloy steel hardware. Extra long wheelie bar provides maximum stability when riding on the rear wheels. 12" bar from wheel to...
€89.99
*
currently 3x in stock
Exotek 1981 - Traxxas Slash - CF Rear Body Mount +28mm back
For the 2WD Slash drag and oval body mounting. Heavy duty carbon fiber with alloy base body mount set (requires Traxxas body post set TRA1914R). Extends the body mount back by 28mm and out of the rear windows of most street eliminator...
€30.99
*
currently 1x in stock
Exotek 1982 - Traxxas Slash - CF Front Drag Tower for shorter 4TEC Shocks
Low profile, low ride height heavy duty 4mm thick carbon fiber front shock tower for 2WD Slash street eliminator cars. Lowered tower allows you to mount the body lower (requires Traxxas body post set TRA1914R). Using Traxxas 4TEC shocks...
€30.99
*
currently 3x in stock
Exotek 1983 - Traxxas Slash - Carbon Drag Tower Rear - Lower Ride Height
Multi hole settings lower the ride height when using the stock long shocks and also extra mounting holes that allow to use shorter front shocks on the rear. Wider tower offers the option to mount the shocks more straight up - ideal for...
€45.99
*
currently 2x in stock
Exotek 1984 - Traxxas Slash Pro - Steering Set - Alu 7075 - Cranks and Rack - Full Bearings
The smoothest, most precise and durable steering set you can bolt on your ride. Includes full set of ball bearings (4 pieces 3x6mm, 4 pieces 5x10mm) and the special crush shims which are at the heart of the slop free design. Optimized...
€44.99
*
currently 2x in stock
Exotek 1985 - Traxxas Slash/Bandit - Vader Drag Chassis Conversion Kit
For experienced hobbyists only. Lightweight street eliminator drag chassis conversion set for use with Traxxas 2WD Slash or Bandit kits. Converts the Slash to be cash race ready for the new hot "Street Eliminator / Slash No Prep" race...
€279.99
*
currently 2x in stock
Exotek 1987 - Flite Spur Gear 48dp 81 Teeth
Flite Spur Gear 48dp 81 Teeth
€13.99
*
currently 2x in stock
Exotek 1988 - Flite Spur Gear 48dp 84 Teeth
Flite Spur Gear 48dp 84 Teeth
€13.99
*
currently 5x in stock
Exotek 1989 - Team Losi 22 5.0 - Drag Rear Clamping 8mm Hex - Wide for Drag Wheels
Wide clamping heavy duty hex sets (8mm each) for TLR 22 based street eliminator cars. Allows easy mounting, without spacers, of ProLine and JConcepts street eliminator wheels.
€15.99
*
currently 5x in stock
Exotek 1990 - Wheelie Bar Wheel 23mm and O-Ring - Alu 6061
Machined alloy wheelie wheel with pressed bearing. Outer diameter 23mm.
€15.99
*
currently 5x in stock
Exotek 1991 - Wheelie Bar Wheel O-Rings (5 pieces)
Replacement O-Ring for Wheelie Bar Wheel. Outer diameter 23mm.
€7.99
*
currently 2x in stock
Exotek 1992 - Losi 22X-4 - HD Rear Wing Mount Alu 7075
Weighs only 12g and keeps your wing aligned, pointed straight and looking good with its black and silver finished design. Works with the stock wing spacer and wing hardware. The shown wing buttons are sold seperately (Exotek 1678).
€32.99
*
currently 7x in stock