Products from Exotek
Verantwortlicher nach GPSR – person responsible GPSR:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
Hersteller – manufacturer:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
No results were found for the filter!
Exotek 1794 - HotBodies D418 - Center Spool with 69T spur
Reduces the rotating mass of your D418 for that extra boost in 13.5T and 17.5T spec racing. The completed set weighs 23gr with the spur gear. Machined 69t pom spur gear is included and bolts on the lighweight alloy spool (use aluminium...
€24.99
*
currently 9x in stock
Exotek 1797 - Tekno RC EB410 - FLITE 75T Center Spool Set for 17.5T and 13.5T
Greatly reduces the rotating mass for that extra boost in 13.5T and 17.5T spec racing. The spool set weighs 18gr with the spur gear and the included coated steel outdrive cups. Machined 75T pom spur gear is included (replacement: Exotek...
€35.99
*
currently 1x in stock
Exotek 1798 - Tekno RC EB410 - 81 Spur Gear and Mounting Plate
The much stronger machined POM spur gear reduces the chances of stripped gears and includes the machined 7075 mounting plate with hardware. The 2 piece design also makes for quick and easy spur gear changes - you do not have to open the...
€20.99
*
currently 2x in stock
Exotek 1799 - Tekno RC EB410 - Heavy Duty B Block Suspension Alu 7075
Extra heavy duty B suspension hanger block. Beefier shape insures protection from frontal arm impacts. Some pictures show the part in build condition, we'll only deliver the mentioned set.
€12.99
*
currently 9x in stock
Exotek 1802 - Asso RC18 - Drag Link Set
For all of the 1:18 Apex, Reflex, RC18 Associated shaft drive minis (not for the RC18T2 belt drive mini series). If you are frustrated by the stock flexing and wobbly steering system of the 1:18 Associated minis then this is your simple...
€14.99
*
currently 1x in stock
Exotek 1804 - XRAY XB4 - CF LiPo Strap and twist nut set
For the XB4 series buggies using the long shorty strap chassis ('18, 17 etc). Designed with a large opening in the strap for easy balance plug pit side access. Simple and easy access twist nut design and factory carbon fiber looks equals...
€19.99
*
currently 8x in stock
Exotek 1805 - XRAY XB4 - Rear Hubs V2, 7075 Alloy, with Shims (1 pair)
Symmetrical design means the hubs can be used on either the left or right side. The hubs are also narrowed by 2mm compared to the stock hubs thus allowing more wheelbase adjustments with out included alloy shims. Also includes 2mm roll...
€37.99
*
currently 2x in stock
Exotek 1807 - Tekno RC EB410 - Rear Brass Weight Set 40gr +8+8
The main weight is 40gr and included are 2 add on 8gr weights (16gr total add on plus the 40gr main weight) so that you can tune the rear weight of your buggy as needed. The weight set is also slightly angled off of the chassis to...
€24.99
*
currently 1x in stock
Exotek 1808 - Tekno RC EB410 - Weight +8+8gr Add on for Exotek 1807
By using longer screws (not included!) you can stack on up to 16gr additional weights as shown. Requires Exotek Weight Set 1807! Some pictures show the part in build condition, we'll only deliver the mentioned set.
€14.99
*
currently 3x in stock
Exotek 1809 - Tekno RC EB410 - Center Diff Bulkhead Alu 7075
Eliminates the flex around the center diff and eliminates the play at the bearing mount to prevent stripped spur gears with high powered motors. Some pictures show the part in build condition, we'll only deliver the mentioned set.
€18.99
*
currently 5x in stock
Exotek 1810 - Tekno RC EB410 - Bulkhead Saver Camber Plate Alu 7075
By adding mounting points to the 2 diff cover holes this will help prevent snapping the 2 upper bulkhead screws off of the bulkhead. To open the diff cover you will need to loosen the 6 camber place screws as well. Some pictures show the...
€14.99
*
currently 1x in stock
Exotek 1811 - Tekno RC EB410 - Replacement 81 Spur Gear for Exotek 1798
Replacement 81 Spur Gear for Exotek 1798
€12.99
*
currently 7x in stock
Exotek 1812 - Tekno RC EB410 - Rear Locking Hinge Pins Titanium (1 Pair)
Eliminates the problem of the rear hub hinge pins sliding out of the arms during impacts. Securely holds the hinge pins and hubs in the rear arm, thanks to the captured pin and lock nut design. Note: a 3mm drill bit or reamer is needed...
€14.99
*
currently 2x in stock
Exotek 1813 - Tekno RC EB410 - Brass C Block 18gr.
Made of brass and black coated to reduce corrosion, this heavy hanger helps to add more rear traction. Can be combined with the Exotek 40gr weight set 20-1807. Some pictures show the part in build condition. The car is not part of the...
€18.99
*
currently 3x in stock
Exotek 1814 - Tekno RC EB410 - Heavy Duty D Block Steel
Made of hard steel, black coated to reduce corrosion and weighs 13gr, this heavy duty hanger lasts much longer than the alloy block and resists being worn away at the bottom due to abrasive track conditions. Some pictures show the part...
€18.99
*
currently 1x in stock
Exotek 1819 - Team Losi 22 4.0 - SR Diff Saver Sleeves (1 pair)
Machined heavy duty stainless steel sleeves clicks directly into place on the SR outdrives and provides needed reinforcement of the plastic outdrives. The sleeves prevents the plastic diffs from spreading open, which can result in chewed...
€14.99
*
currently 5x in stock
Exotek 1820 - Losi 22-4 2.0 - 7075 Diff Cup for Pucks (1 pair for rear gear diff)
This puck cups only weigh 2.8gr for BOTH, versus the 7.2gr for both stock steel cups. For use only with stock spec 13.5 and 17.5 racing and in the rear 22-4 2.0 gear diff. One picture shows the part in build condition, we'll only deliver...
€18.99
*
currently 1x in stock
Exotek 1821 - Tekno RC EB410 - Steering Rack 7075
Reinforced design minimizes any extra cut outs to increase strength, yet only weighs 6gr. Some pictures show the part in build condition. The car is not part of the delivery content.
€19.99
*
currently 3x in stock
Exotek 1822 - Tekno RC EB410 - Steering Cranks, 1 Pair, with steel posts
Reinforced alloy design elliminates the problem of the hex bearing posts stripping in the plastic cranks allowing for easier maintenance and disassembly. Includes steel bearing posts that doesn't mushroom when assembled which also makes...
€29.99
*
currently 4x in stock
Exotek 1824 - Associated F6 - Rear Traction Plate - Conversion Kit
Taking our years of F1 experience we have now applied it to the popular Associated F1. Made of USA carbon fiber, this battery hold down conversion adds rear end flex to the F6 chassis for improved traction in all conditions. The...
€24.99
*
currently 2x in stock
Exotek 1826 - XRAY XB2 - Motor Plate with Spur Shield for XB2 3-Gear Laydown
1 piece motor plate with integrated sour shield is more durable than a plastic shield and keeps the body from rubbing the spur gear which could destroy the spur gear and body paint. Lightweight design (12.5gr) with "vents" for added...
€19.99
*
currently 8x in stock
Exotek 1828 - Associated B6 / T6.1 / SC6.1 - CF LiPo Tabs and Cups Set
Adjust the battery quickly, forward or way back, with ease as track conditions call for it. Benefits of the cups and lipo tab set includes: - Securely cradles the battery in place for added chassis flex compared to taping the battery to...
€28.99
*
currently 1x in stock
Exotek 1829 - Team Losi 22 / 22-4 - 3mm Spring Perch Set Alloy (1 pair)
Allows an additional 3mm lower ride height, needed for todays high grip track conditions. Extra milling for a lightweight design with reinforced strength of cnc cut aluminium with milled holes to help reduce debris from collecting...
€14.99
*
currently 6x in stock
Exotek 1830 - Tekno RC EB410 - Edge Lightweight Body
Crafted to greatly lower the looks and cg over the stock body the EDGE body sits 8mm lower than the stock body. It was also taken great care to still allow the mounting of the fan above the motor and still allow normal height or low...
€32.99
*
currently 2x in stock
Exotek 1833 - Losi 22T - 4mm Carbon Fiber Shock Tower Front
Lightweight, at only 12gr (stock is 14.8gr), yet heavy duty construction with a factory look and a more robust material than the stock plastic for consistent handling on high grip tracks. NOT FOR THE 22SCT. Some pictures show the part in...
€28.99
*
currently 3x in stock
Exotek 1834 - Losi 22 4.0 - Titanium Hinge Pin Set - 2WD Buggy 17.5T
At only 11gr this pin set is almost half the weight of the stock pins. Full set of hinge pins for the front and rear inner and outer arms. For 17.5T spec class buggies only! Some pictures show the part in build condition - we'll only...
€57.99
*
currently 3x in stock
Exotek 1837 - Associated F6 - 7075 HD Steering Crank
Long style crank arm for smooth steering response that has 3 built in settings to adjust your steering geometry. Some pictures show the part in build condition - we'll only deliver the mentioned steering crank.
€18.99
*
currently 2x in stock
Exotek 1838 - Associated F6 - 7075 HD Front Arm Base
1 piece design replaces the 3 thin front chassis posts insuring extra prodection from tweaked suspension and chassis form impacts. One picture shows the part in build condition, we'll only deliver the descripted part.
€18.99
*
currently 2x in stock
Exotek 1840 - Tekno RC EB410 - Steering Long Posts Titanium (2 pieces)
Eliminates the problem of not being able to push down on the posts when screwing them into the bulkheads with a socket driver. Lightweight, smooth fitting, heavy duty and a great addition to make maintenance on your EB410 a breeze! One...
€14.99
*
currently 5x in stock
Exotek 1844 - Graphite LiPo Tabs for Battery Mount (2 pcs)
Delivery content: Only the two graphite tabs. No post, no shims, no screws. Suitable for 1:10 - can be used for a lot of different cars.
€10.99
*
currently 9x in stock
Exotek 1850 - Asso B6.1 - C Block Brass Weight Black 25gr
The block weighs 24gr and helps increase rear traction by adding weight at a low point under the gearbox. Some pictures show the part in build condition. We'll only deliver the descripted part.
€20.99
*
currently 3x in stock
Exotek 1859 - XRAY X1 - 7075 HD Front Arm Base - ORANGE
1 piece design replaces the 3 front chassis posts insuring extra prodection from tweaked suspension and chassis form impacts. One picture shows the part in build condition, we'll only deliver the descripted part.
€19.99
*
currently 4x in stock
Exotek 1860 - Collar ID Set Metric f.e. for HUDY (1.5/2.0/2.5/3.0) (4 pieces)
When all of your wrenches looks the same, these collars help quickly locate the size you're needing to grab when your are working to get back on track asap. For the most popular sizes the collars are used with 1.5, 2.0, 2.5 and 3.0...
€14.99
*
currently 4x in stock
Exotek 1863 - R-TEK GT Body 190mm 1/10
190mm 1/10 GT polycarbonate body and wing set. Exotek is excited to bring you our bold new contender for the highly competitive USGT / GT classes! Designed for domination with an aggressive splitter, muscular fenders, low slung hood,...
€38.99
*
currently 12x in stock
Exotek 1864 - Tamiya TRF419 - Servo Mount Alu 7075 for RS7 Chassis
One piece servo mount for Tamiya 419 series of touring cars. Solid design for less flex and less tweak after impacts. Only 9gr. Also for the Exotek RS7 conversion. Not for the shaft drive cars. One picture shows the part in build...
€18.99
*
currently 2x in stock
Exotek 1865 - Tamiya TA07 - 4° HD C Hubs Alu 7075
For Tamiya series touring cars that are using the new 418 steering knuckles. Increases the rigidity over the stock nylon hubs for more consistent handling, especially in higher grip conditions. Increases the durability over the stock...
€32.99
*
currently 11x in stock
Exotek 1866 - Tamiya TA07 - RS7 Chassis Conversion Kit
Exotek has streamlined the design and added in many pro features for the venerable TA07 such as: - adjustable battery mount-set - allows easy weight bias adjustments for forward or back battery placement - adjustable carbon battery cups...
€149.99
*
currently 4x in stock
Exotek 1867 - Associated B6.1 - Flite Top Shaft for Flite Spur Mount
For Laydown and Layback Transmission buggies - not for the standup transmission. Ultra light top shaft that has been drilled and the teeth narrowed for increased acceleration and a cooler running motor. Note the top shaft teeth are 6.5mm...
€18.99
*
currently 2x in stock
Exotek 1868 - Associated B6.1 - Rear Ball Stud Mount Alu 7075 black/blue
Customized polished black base with blue chamfered accent goes great with the stock plastic parts or after market blue parts. One picture shows the part in build condition to show the usage.
€14.99
*
currently 4x in stock
Exotek 1870 - Associated B64 - Alu 7075 Rear Hub Set black/blue (1 pair)
Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts. Through careful cutting and shaping the hubs are actually 2gr lighter than the alloy Associated hub sets....
€37.99
*
currently 5x in stock
Exotek 1871 - Losi TLR22 SR - Puck Diff Outdrives 7075 Alu (1 pair)
Replaces the stock plastic outdrives of the 22SR diff with heavy duty hard anodized 7075 cups for longer lasting stock racing performance when combined with MIP pucks or rollers (not included). Note - the stock TLR 22 bones are not...
€18.99
*
currently 4x in stock
Exotek 1874 - Tekno EB48 - Rear Hub Set Alu 7075 (1 pair)
Extra durable for high powered applications and polished and anodized in glossy Tekno team colors for that factory look. Matches the stock geometry. Compatibility: - Tekno RC EB48.4 - Tekno RC NB48.4 Some pictures show the part in build...
€46.99
*
currently 7x in stock
Exotek 1876 - Tekno EB48 - Steering Spindles Alu 7075 (1 pair)
Extra durable for high powered applications and polished and anodized in glossy Tekno team colors for that factory look. Matches the stock geometry. Compatibility: - Tekno RC EB48.4 - Tekno RC NB48.4 Some pictures show the part in build...
€46.99
*
currently 7x in stock
Exotek 1877 - Tekno EB48 - Steering Crank Set Alu 7075 (3 pieces)
Extra durable for high powered applications and polished and anodized in glossy Tekno team colors for that factory look. Matches the stock geometry. Compatibility: - Tekno RC EB48.4 - Tekno RC ET48.3 (use TKR8100 ackerman plate) - Tekno...
€46.99
*
currently 1x in stock
Exotek 1881 - Yokomo YZ2 - LiPo Tab Set Carbon Fiber
Replaces the stock plastic tab with simpler, more secure and better working large sized carbon fiber tabs, the same popular and proven style that's also been used by Exotek für other buggies. Includes hardware and instruction sheet. Note...
€11.99
*
currently 2x in stock
Exotek 1884 - J-ZERO GT Body 190mm 1/10
Designed for domination with an aggressive splitter, muscular fenders, low slung hood, downforce inducing side skirts and a sports car cockpit for the most aggressive aero package with minimal drag. The body has 2 trim lines marked on...
€38.99
*
currently 20x in stock
Exotek 1887 - Kyosho RB7 - HD Laydown Motor Plate with Gear cover - black/red
Heavy duty 3.25mm thick mounting plate which is stronger than the stock plate and therefore eliminates motor flex to insure better gear mesh. The black motor plate helps to reduce your motor temperatures, while the build in gear cover is...
€18.99
*
currently 1x in stock
Exotek 1888 - Kyosho RB7 - LiPo Cups and Mount System
Adjust the battery quickly, forward or way back, with ease as track conditions call for it. Benefits of the cup and lipo tab set includes: - Securely cradles the battery in place for added chassis flex compared to taping the battery to...
€35.99
*
currently 2x in stock
Exotek 1889 - TLR 22 - LiPo Tabs and Posts
Easy bolt on lipo tab set for use with the 22 5.0 lipo cups. Bypasses the o-rings by way of easy to use carbon lipo tabs and post spacers. Simply twist the tabs for quick battery access. Includes carbon fiber lipo tabs and alloy mounting...
€17.99
*
currently 3x in stock
Exotek 1890 - TLR 22 5.0 - Alu 7075 adjustable rear hub set (+0/+1/+2/+3mm)
Adjustable height rear hub set for the TLR 22 5.0 (4.0, etc, with 67mm bones). Includes precision machined POM hub height inserts that allow you to set the hinge pin at stock level (+0) or raise the hub in 1mm increments (+1, +2, +3)....
€41.99
*
currently 2x in stock
Exotek 1894 - Tekno EB410 - Hex Alu 7075 6.5mm wide +2mm (1 pair)
This 6.5mm wide hexes are +2mm (per hex) compared to the stock hexes, allowing you to tune the width of your buggy. Note - 6.5mm hexes can be used on the front and rear axles! Polished and anodized in a rich navy color. Including M2...
€14.99
*
currently 1x in stock
Exotek 1895 - Tekno EB410 - Hex Alu 7075 7.5mm wide +3mm (1 pair)
This 7.5mm wide hexes are +3mm (per hex) compared to the stock hexes, allowing you to tune the width of your buggy. Note - 7.5mm hexes are only supposed to be used on the rear axles! Polished and anodized in a rich navy color. Including...
€14.99
*
currently 3x in stock
Exotek 1900-05 - EXO-SIX.2 Motor Mount Set
Allows for easier spur gear changes and easier motor mesh tightening and removal. Also has lowered CG. Fits original EXO-SIX as well.
€28.99
*
currently 1x in stock
Exotek 1901 - Tamiya TB05 - EXO-SIX.2 7075 Alloy Gear Box Set with Sway Bar Mount
Provides a solid tweak free design that is about 8gr lighter than each of the stock plastic TB05 gear boxes. Being 25% percent lighter than stock also means substantially lower center of gravity for improved chassis roll. New camber...
€51.99
*
currently 4x in stock
Exotek 1902 - Tamiya TRF103 - HD Motor Plate Set Alu 7075
New heavy duty rear motor pod plate set for the Tamiya TRF103. Reinforced design greatly improves the rear pod durability of the stock TRF103 which is prone to bending or tweaking from rear impacts. Matches the stock geometry and...
€35.99
*
currently 3x in stock
Exotek 1903 - TLR 22 5.0 - POM Insert Replacements for Exotek 1890 (4 pieces)
Replacement POM height inserts for Exotek 1890 hubs.
€18.99
*
currently 1x in stock
Exotek 1904 - Losi 22 - Front Pivot Alu 7075
Machined to be heavy duty yet lighter weight than the optional TLR alloy pivots. Retains the stock LRC geometry of the kit plastic pivots. One picture shows the part in build condition to show of the usage.
€24.99
*
currently 8x in stock
Exotek 1905 - Associated B6.1 - Front Bulkhead Alu 7075 black/blue
Bulkhead has 2 settings for kick up - 20° and 30° - depending on which direction it's mounted. One picture shows the part in build in condition to show of the usage.
€24.99
*
currently 2x in stock
Exotek 1907 - Losi 22 5.0 - Motor Plate ALu 7075 black/silver
The built in gear cover is stronger than the stock plastic cover, to insure that the body does not press the cover onto the spur gear during hard tumbles. Includes also the alloy gearbox spacer. Extra lightweight and vented for cooler...
€18.99
*
currently 7x in stock
Exotek 1912 - Kyosho RB7 - Alu 7075 Wing Mount black/red (1 pair)
Now with a super dialed 2 color black with red chamfer anodizing treatment to give your RB7 that extra special factory look. Extra durable but intricately machined to be lightweight at 10g for the pair. One picture shows the part in...
€32.99
*
currently 3x in stock