Products from Exotek
Verantwortlicher nach GPSR – person responsible GPSR:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
Hersteller – manufacturer:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
No results were found for the filter!
Exotek 2194 - F1 - 1/10 Rubber Tires - Front - 38X - Red Medium (1 pair)
New V2 MEDIUM RED 38X (38 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire. New redesigned foam inserts for improved fit and performance. The red sets are...
€24.99
*
currently 5x in stock
Exotek 2199 - F1 - 1/10 Rubber Tires - Front - 36X - Double Red Soft (1 pair)
New V2 soft DOUBLE RED 36X (36 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire. New redesigned foam inserts for improved fit and performance. The double red...
€24.99
*
currently 6x in stock
Exotek 2195 - F1 - 1/10 Sidewall Sticker - Yellow (4 pcs)
Replacement vinyl side wall stickers for Exotek F1 tires or similar sizes. Includes 4 stickers made of heavy duty vinyl with vibrant colors for easier car visibility. Dimensions- 40mm ID x 50.5mm OD Instructions- clean tires thoroughly...
€6.99
*
currently 7x in stock
Exotek 2196 - F1 - 1/10 Sidewall Sticker - Red (4 pcs)
Replacement vinyl side wall stickers for Exotek F1 tires or similar sizes. Includes 4 stickers made of heavy duty vinyl with vibrant colors for easier car visibility. Dimensions- 40mm ID x 50.5mm OD Instructions- clean tires thoroughly...
€6.99
*
currently 8x in stock
Exotek 2159 - Losi Mini Drag - WHEELIE BAR SET
Extends between 7-9" (axle to axle). The longer bar gives you more stability, for straighter and faster passes without needing to let off the throttle as often compared to the stock short bar. And the flat bar design adds limited upwards...
€39.99
*
currently 2x in stock
Exotek 2192 - Losi 22S - WHEELIE BAR SET adjustable
Extends from 9.5" to 12" (axle to axle). The longer bar gives you more stability, for straighter and faster passes without needing to let off the throttle as often compared to the stock short bar. And the flat bar designs adds limited...
€64.99
*
currently 2x in stock
Exotek 2189 - 4mm Turnbuckle wrench with 4.75mm cup popper - steel
4mm turnbuckle wrench on one end and 4.75mm opening ball cup popper on the other for Exotek ball cups.
€19.99
*
currently 5x in stock
Exotek 2190 - 5.5mm / 7.0mm Turnbuckle wrench - steel
5.5mm wrench on one end and 7mm on the other.
€19.99
*
currently 5x in stock
Exotek 2176 - Hot Bodies D4 EVO3 - Spur Gear Plate Set
New heavy duty machined spur gear with alloy mounting plate for the HPI D4 series. The machined 7075 mounting plate with its 2 piece design makes for easier spur gear changes- you do not have to open the gear diff and remove outdrives...
€22.99
*
currently 6x in stock
Exotek 2197- Hot Bodies / Tekno RC - Spur Gear 48dp 68T - fits Exotek 1798 and 2176
Replacement 68t delrin machined spur gear for Exotek spur set 2174 and 1798. Engraved with 68 on the side. Smaller than stock for use in stock spec type classes.
€14.99
*
currently 8x in stock
Exotek 2177- Hot Bodies / Tekno RC - Spur Gear 48dp 72T - fits Exotek 1798 and 2176
Replacement 72t delrin machined spur gear for Exotek spur set 2174 and 1798.
€14.99
*
currently 10x in stock
Exotek 2174 - Hot Bodies D4 EVO3 - Rear Clamping Hex - orange (2 pcs)
Precision machined alloy rear clamping 12mm hex set. Replaces the stock, easily lost, floating pin hex design. Machined and anodized in factory orange and matches the stock geometry. Includes 1.6mm hard steel pins and 2mm screws. Do not...
€15.99
*
currently 1x in stock
Exotek 2175 - Hot Bodies D4 EVO3 - Front Locking Hex - orange (2 pcs)
Precision machined alloy front locking 12mm hex set. Replaces the stock floating, easily lost pin, hex design. Machined and anodized in factory orange and matches the stock geometry. Includes special tighter tolerance bearing crush shims...
€15.99
*
currently 3x in stock
Exotek 2179 - Tekno RC EB48 2.1 - Servo Mount and Tray Set - Carbon Fiber and Alloy 7075
Heavy duty 7075 machined alloy steering servo mount with carbon fiber electronics tray for the EB48 series. Lightweight yet high strength factory style servo mounting to reduce the risk of stripped plastics. Polished and anodized 7075...
€44.99
*
currently 6x in stock
Exotek 2180 - Tekno RC EB48 2.1 - Center Diff Mount - Alloy 7075
Polished and anodized in factory colors. The alloy construction maintains proper gear mesh for longer gear life and reduces the chance of stripped screws coming loose in a race. Uses the stock hardware. Always use blue thread lock and do...
€24.99
*
currently 8x in stock
Exotek 2158 - Losi Min-B/Mini-T - Locker Spur Gear - Modul 0.5 - 60 T
Slipper eliminator direct mount spur gear for use on high traction conditions such as carpet and street racing. The spur gear also has wider teeth (4.5mm total) for increased durability with high powered motors. 100% machined delrin spur...
€14.99
*
currently 9x in stock
Exotek 2160BLK - 30MM MINI FAN MOUNT, CLAMP ON 7075 FOR 20MM DIA. MOTORS - BLACK
Special clamp on alloy fan mount for 20MM diameter 1/18-1/14 mini/micro motors. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you...
€19.99
*
currently 9x in stock
Exotek 2160BLUE - 30MM MINI FAN MOUNT, CLAMP ON 7075 FOR 20MM DIA. MOTORS - BLUE
Special clamp on alloy fan mount for 20MM diameter 1/18-1/14 mini/micro motors. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you...
€19.99
*
currently 10x in stock
Exotek 2161BLUE - 30MM MINI FAN MOUNT, CLAMP ON 7075 FOR 24MM DIA. MOTORS - BLUE
Special clamp on alloy fan mount for 24MM diameter 1/18-1/14 mini/micro motors. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you...
€19.99
*
currently 10x in stock
Exotek 2161BLK - 30MM MINI FAN MOUNT, CLAMP ON 7075 FOR 24MM DIA. MOTORS - BLACK
Special clamp on alloy fan mount for 24MM diameter 1/18-1/14 mini/micro motors. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you...
€19.99
*
currently 5x in stock
Exotek 2058 - Losi 22S Drag - MK3 SLIPPER SET, 3 PAD FINNED SLIPPER SET
Requires AE or EXOTEK Octalock spur gears- not included. New turbine cooling triple slipper disks for the Losi 22S (Not TLR22) top shafts for quicker slipper cool downs before the next pass. Provides added consistency due to 3 friction...
€48.99
*
currently 4x in stock
Exotek 2178 - Asso B74 - Rear Hub Set - Alloy 7075 (1 pair)
Heavy duty design maintains your suspension geometry settings, race after race. Customized polished black base with blue chamfered accents goes great with your stock or after market parts. And for precise bearing fit, the recess is...
€40.99
*
currently 7x in stock
Exotek 2165 - Asso B74.2 - Steering Hub Set - Alloy 7075 (1 pair)
Great addition to you car that provides extra durability and precision. Polished and anodized black with a factory blue chamfer cut with silver cut bearing pockets for precise bearing fit. And for precise bearing fit, the recess is...
€40.99
*
currently 5x in stock
Exotek 2162 - Asso CB6.4 - LCG Battery Top Brace - 4mm Carbon
Lowered to hold in LCG type shorty batteries and an additional front hole to allow the servo to be mounted further back if needed.
€17.99
*
currently 2x in stock
Exotek 2168 - HPI Sport 3 - Spur Mount - Alloy 6061 - Ultralight
All alloy construction weighs only 2.6gr- the stock steel mount is 8.4gr! Less rotating mass means longer run times, a cooler motor and faster power delivery. Accepts the stock spur gear or aftermarket 2 bolt or 4 bolt pattern spur gears...
€16.99
*
currently 3x in stock
Exotek 2169 - HPI Sport 3 - Drive Shaft - Alloy 7075 - Ultralight
All alloy construction weighs only 12.5gr- the stock steel shaft is 35gr! Less rotating mass means longer run times, a cooler motor and faster power delivery. Polished and anodized in factory orange. The shown optional spur gear mount is...
€18.99
*
currently 3x in stock
Exotek 2170 - HPI Sport 3 - Diff Gear - Alloy 7075 - Ultralight
Precision machined from 7075 alloy and hard anodized for durability. Half the weight of the stock steel diff gear with better machined tolerances for smoother bearing fit and gear mesh.
€16.99
*
currently 10x in stock
Exotek 2167 - HPI Sport 3 - Carbon Fiber Tower Rear
Heavy duty and extra stiff for improved suspension action and consistency. Lightweight carbon gives your Sport3 that racing factory look. Includes lightweight alloy 4.75mm socket balls for the shock cap.
€27.99
*
currently 5x in stock
Exotek 2166 - HPI Sport 3 - Carbon Fiber Tower Front
Heavy duty and extra stiff for improved suspension action and consistency. Lightweight carbon gives your Sport3 that racing factory look. Includes lightweight alloy 4.75mm socket balls for the shock cap.
€27.99
*
currently 5x in stock
Exotek 2171 - HPI Sport 3 - HD Steering Set - Alloy 7075 - No Jam Design
New top drag link design prevents the steering from getting jammed when pebbles falls into the chassis pockets and wedging under the stock steering rack- a common ailment of the stock Sport 3. Includes left crank, right crank, drag link,...
€39.99
*
currently 10x in stock
Exotek 2163 - Asso B6.4 - C-Block Brass Weight 24g
Not for use with the B6.2 75mm arms. The block weighs 24gr and helps increase rear traction by adding weight at a low point under the gearbox.
€31.99
*
currently 7x in stock
Exotek 2138 - Asso B6.4 - Steering Blocks - -1mm 4L/4R (2 pcs)
Great addition to you car that provides extra durability and precision to your front wheels and steering action. Polished and anodized black with a factory blue chamfer cut with silver cut bearing pockets for precise bearing fit. B6.4...
€40.99
*
currently 3x in stock
Exotek 2139 - Asso B6.4 - Steering Cranks with Shims (1 pair)
Machined alloy construction insures precise steering input and heavy duty long lasting performance. Includes stronger 3x7 bearings and crush sleeves for ultra smooth swing action and long lasting bearing performance. 2mm shims included...
€29.99
*
currently 2x in stock
Exotek 2164 - Asso B6.4 - Top Shaft Screw - Titanium - Slipper Screw
Almost half the weight of the stock bolt at 2.2gr, this titanium bolt lightens your rotating mass and lowers your CG. Direct fit on the stock laydown top shaft and slipper and uses the stock slipper pin and hardware.
€13.99
*
currently 2x in stock
Exotek 2125 - Losi Tenacity/Lasernut - HD Rear Gearbox Set - Alloy 7075 with bearings
Bolt on replacement, all machined alloy rear gearbox for the 1/10 Losi Tenacity (DB, TT, SCT etc) and Lasernut series. Our heavy duty gearbox delivers extra durability and precision gear mesh and alignment- the alloy construction insures...
€89.99
*
currently 5x in stock
Exotek 2124 - Losi Tenacity/Lasernut - HD Front Gearbox Set - Alloy 7075 with bearings
Bolt on replacement, all machined alloy rear gearbox for the 1/10 Losi Tenacity (DB, TT, SCT etc) and Lasernut series. Our heavy duty gearbox delivers extra durability and precision gear mesh and alignment- the alloy construction insures...
€84.99
*
currently 1x in stock
Exotek 2140 - Losi Tenacity - HD Top Plate Set - 7075 Alloy with Carbon Fiber
Factory racing style heavy duty carbon fiber with alloy bracket top plate set for the 1/10 Losi TENACITY line including DB, TT and SCT (too short for the Lasernut). The high gloss 2.5mm carbon fiber center plate is 1 piece for strength...
€64.99
*
currently 1x in stock
Exotek 2137 - Asso B6.4 - CF LiPo Tabs and Cups Set
Adjust the battery quickly, forward or way back, with ease as track conditions call for it. Benefits of the cup and lipo tab set includes; - Securely cradles the battery in place for added chassis flex compared to taping the battery to...
€27.99
*
currently 1x in stock
Exotek 2147 - Asso RB10 - HD Rear Arm Mount - D - Alu 7075
Stronger construction insures race finishes, even after hard impacts, so that you drive more and wrench less. Tapered hinge pin opening insures easier installation and maintains the stock geometry and toe in.
€21.99
*
currently 1x in stock
Exotek 2146 - Asso RB10 - Titanium Front Axles (1 pair)
At only 4.5 grams per pair, these axles are perfect for reducing rotating mass for quicker acceleration. Rounded and angled hex profile also makes wheel installation extra quick and easy!
€27.99
*
currently 1x in stock
Exotek 2152 - Asso RB10 - Steering Hubs - Alu 7075 (2 pcs)
Great addition to you car that provides extra durability and precision to your front wheels and steering action. Also helps reduce the 'bump steer' found on the stock hubs by lowering the ball stud slightly. Designed to fit snugly into...
€39.99
*
currently 1x in stock
Exotek 2153 - Asso RB10 - Alloy Differential Gear - 7075 - hard anodized
Perfect machined roundness makes for a free spinning transmission and a must have for high powered drag racing applications. This is much stronger than the stock plastic diff gear but not indestructible so it is important to use black or...
€33.99
*
currently 1x in stock
Exotek 2150 - Asso RB10 - HD Steering Crank Set - Alloy 7075
The servo ball mount is reinforced to resist bends seen in other brands cranks. Gives you a more direct steering feel with less steering bounce. Also the servo crank is shortened slightly to prevent it hitting some taller servos which is...
€31.99
*
currently 3x in stock
Exotek 2149 - Asso RB10 - Rear Hub Set - 7075 Alloy
Heavy duty design maintains your suspension geometry setting, race after race. Our updated design works as either the left or right hub (hubs are non-directional) and also allows for adjusting the wheelbase as needed using the supplied...
€36.99
*
currently 1x in stock
Exotek 2145 - Asso RB10 - HD Idler Gear - Alloy 7075 -31 T
Must have for high powered applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along with...
€14.99
*
currently 1x in stock
Exotek 2144 - Asso RB10 - Steering Rack Alu 7075
Precision machined, polished and anodized in team AE blue for that factory racing look.
€19.99
*
currently 3x in stock
Exotek 2148 - Asso RB10 - Front Bulkhead - Alu 7075
Great looking and solid mounting of your front suspension. Includes set screws to hold the hinge pins. Use blue thread and do not over tighten hardware.
€24.99
*
currently 1x in stock
Exotek 2142 - Asso RB10 - Alloy Gearbox
The 'bullet proof' rear motor gear box, heavy duty machined, that keeps your gears in perfect alignment, your slipper and motor cooler and the wheelie bar pointed straight. Direct bolt on and weighs 43gr.
€45.99
*
currently 1x in stock
Exotek 2154 - Asso RB10 - Servo Mount - Alu 7075 - One Piece Design
Makes for easier servo install and removal thanks to the 1 piece design that will always match the chassis holes.
€19.99
*
currently 2x in stock
Exotek 2151 - Asso RB10 - Rear Clamping Hex - Alu 7075 (1 pair)
Looser steel cross pin tolerance allows you to tighten the wheel nuts without binding the bearings. The hexes do not lock onto the bearings, unlike the stock plastic hexes. Uses heavy duty M2 alloy steel screws for the clamping (do not...
€15.99
*
currently 1x in stock
Exotek 2143 - Asso RB10 - Direct Spur Mount
Machined alloy unit that weighs only 3.4gr with the screws. Uses a wider range of available spur gear sizes by Exotek, Kimbrough, etc. Allows for easy switching between a locked spur or the stock slipper as track conditions warrant. Uses...
€15.99
*
currently 1x in stock
Exotek 2157 - F1 Ultra - Light Alloy Ball ends for steering links only (4 pcs)
Lightweight 7075 ball ends for use on the F1Ultra steering ends or sway bars. Tighter fitting for reduced play and hard anodized for durability. Set of 4. Thread length is 4mm. Do not use for the camber links or side links.
€15.99
*
currently 7x in stock
Exotek 2128 - F1 2023 - F1 Body 1/10 - lightweight
Super F1 2023 style race body for the F1Ultra and similar dimensioned narrow style 1/10 F1 pans cars. 2 scale option side intake styles included- scooped RB style via add on molded trims and classic flat style by not using the added...
€39.99
*
currently 11x in stock
Exotek 2141 - Mugen MTC-2 - Alu Spool Outdrive (1 pc)
Instead of screwing the 2 stock outdrive cups to the plastic spool, which is known to come loose, this redesigned cup allows 1 long M3 screw to pass through the spool and is screwed directly into this threaded cup instead, for solid and...
€15.99
*
currently 7x in stock
Exotek 2156 - Twister foam inserts - firm (1 Pair)
Firm open cell foam inserts for use in Exotek Twister drag tires in place of the air valve system. If these foam inserts are used then do not use the air valves. Remove valves and leave the holes in your wheels for proper venting.
€9.99
*
currently 10x in stock
Exotek 2155 - Twister Pro Drag Tire and Wheel Set - Rear Belted Tires, Wheels with firm foam...
New firm foam insert version, ultra high performance 1/10 street eliminator tire sets for B6, 22S, 22 5.0, DR10, Slash and similar 2wd drag cars. Includes 1 pair of belted rubber drag tires with nylon wheels and firm foam inserts....
€75.99
*
currently 5x in stock
Exotek 2133 - F1 - 1/10 Rubber Tires - Rear - 28X - Double-Red Super-Soft (1 pair)
Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, Exotek has taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set...
€21.99
*
currently 13x in stock
Exotek 2123 - Asso DR10M - Alloy 7075 3 Gear Gearbox with Motorplate
The 'bullet proof' piece for your high powered DR10M build. Heavy duty machined alloy gearbox that keeps your gears in perfect alignment, even under the heaviest motor rpm loads. New '3 Gear' option rotates the motor around and uses 1...
€89.99
*
currently 10x in stock
Exotek 2131 - Traxxas Slash 4x4 - HD Steel front CVD axle set
Heavy duty hardened steel complete CVD axle sets and diff cups for the front of the SLASH 4x4 and RALLY. Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping out the stock plastic...
€42.99
*
currently 5x in stock
Exotek 2132 - Traxxas Slash 4x4 2WD - HD Steel Rear CVD axle set
Heavy duty hardened steel complete CVD axle sets and diff cups for the front of the SLASH 4x4, SLASH 4x4 2WD and RALLY. Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping out the...
€42.99
*
currently 1x in stock