Products from Exotek
Verantwortlicher nach GPSR – person responsible GPSR:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
Hersteller – manufacturer:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
No results were found for the filter!
Exotek 2107 - Asso B6.3 - Carpet Chassis Conversion Set - Alloy 7075
As indoor tracks transition to high grip carpet you need more specialized equipment to take advantage of the super high grip conditions- this is what John Cravotta at Team Scream Racing has discovered. Co-developed with John, Exotek...
€149.99
*
currently 2x in stock
Exotek 2120 - F1 - 1/10 Disk Wheels - Front (1 pair)
Sold as 1 pair of wheels f or use with Exotek F1 tires only. For use on 1/10 pan car style F1's such as by Exotek, Xray and Schumacher etc. Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk...
€8.99
*
currently 21x in stock
Exotek 2121 - F1 - 1/10 Disk Wheels - Rear (1 pair)
Sold as 1 pair of wheels f or use with Exotek F1 tires only. For use on 1/10 pan car style F1's such as by Exotek, Xray and Schumacher etc. Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk...
€8.99
*
currently 27x in stock
Exotek 2115 - F1 - 1/10 Rubber Tires - Front - 40X - Yellow Medium (1 pair)
Exotek is proud to release our first entry into the 1/10 F1 tire segment! Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, Exotek has taken all of the best elements of RC F1 tires from...
€21.99
*
currently 7x in stock
Exotek 2118 - F1 - 1/10 Rubber Tires - Rear - 36X - Yellow Medium (1 pair)
Exotek is proud to release our first entry into the 1/10 F1 tire segment! Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, Exotek has taken all of the best elements of RC F1 tires from...
€21.99
*
currently 10x in stock
Exotek 2096 - F1 ULTRA R4 / R5 / XRAY X1 - F1 SPOOL W/ 1/4" CARBON AXLE AND RIGHT HUB
An F1 spool helps eliminate 'diffing out' of the rear pod on extra high grip black carpet conditions and gives your F1 more corner exit speeds. This spool also greatly reduces the weight compared to a gear diff or standard ball diff for...
€40.99
*
currently 7x in stock
Exotek 2097 - F1 ULTRA R4 / R5 - Metal Suspension Clip (6 pcs)
Easy to install and stronger holding strength than the stock clips.
€6.99
*
currently 2x in stock
Exotek 2093 - Asso B6.3 - Front Bumper Set with GNSS Slot
Add protection to your Associated B6.3, B6.2, B6.1 drag cars with our heavy duty alloy, carbon fiber and foam bumper set. This bumper set may just pay for itself in your first crash. Allows for optional mounting of SkyRC GNSS gps modules...
€41.99
*
currently 20x in stock
Exotek 2102 - Tekno EB410.2 - HD Adjustable Spindles Alloy (1 pair)
New heavy duty alloy front steering spindle set for the EB410.2 AND ET410.2. Extra durable for high powered applications and polished and anodized in Tekno team colors as well as being machined a second time to insure precise bearing...
€42.99
*
currently 5x in stock
Exotek 2091 - Asso DR10M - Front Bumper Set with GNSS Slot
Add protection to your Associated DR10 and DR10M drag car with our heavy duty alloy, carbon fiber and foam bumper set. This bumper set may just pay for itself in your first crash. Allows for optional mounting of SkyRC GNSS gps modules...
€41.99
*
currently 6x in stock
Exotek 2092 - Traxxas Drag Slash - Front Bumper Set with GNSS Slot
Add protection to your Traxxas Drag Slash and 2wd Slash based drag cars with our heavy duty alloy, carbon fiber and foam bumper set. This bumper set may just pay for itself in your first crash. Allows for optional mounting of SkyRC GNSS...
€41.99
*
currently 8x in stock
Exotek 2094 - Asso B6 - Alloy Drag Gear Box Set with Motorplate and Sway Bar Mounts
REQUIRES- B6.1 - B6.4 gear box parts including Exotek 2034 Idler Gear, Associated AE91799 TOP SHAFT, BEARINGS AND HARDWARES. High performance heavy duty laydown gear box with motor plate for AE B6.1-B6.4 drag racing builds. All alloy...
€119.99
*
currently 1x in stock
Exotek 2095 - Asso B6 - 2.5mm Carbon Fiber Spacer (2 pcs)
2.5mm thick carbon fiber spacers that raises the AE B6.1 - B6.4 series laydown/layback gearboxes up so that the dog bones angle sits straighter when at ride height and gives you extra room to install larger spur gears so that they don't...
€18.99
*
currently 5x in stock
Exotek 2084 - Tekno EB48 2.0 - HD Bell Crank Set 7075
Extra durable for high powered applications and polished and anodized in glossy Tekno team colors for that factory look. Matches the stock geometry. Compatibility; + Tekno RC EB48 2.0 + Tekno RC NB48 2.0
€48.99
*
currently 4x in stock
Exotek 2085 - Tekno EB48 2.0 - HD Rear Hub Set 7075
Extra durable for high powered applications and polished and anodized in glossy Tekno team colors for that factory look. Matches the stock geometry. Compatibility; + Tekno RC EB48 2.0 + Tekno RC NB48 2.0
€48.99
*
currently 4x in stock
Exotek 2086 - Tekno EB48 2.0 - HD Spindles Set 7075
Extra durable for high powered applications and polished and anodized in glossy Tekno team colors for that factory look. Matches the stock geometry. Compatibility; + Tekno RC EB48 2.0 + Tekno RC NB48 2.0
€48.99
*
currently 3x in stock
Exotek 2090 - Twister Pro Drag Tire and Wheel Set - Rear Belted Tires, Wheels and Air Valves (1...
New ultra high performance 1/10 street eliminator tire sets for B6, 22S, 22 5.0, DR10, Slash and similar 2wd drag cars. Includes 1 pair of belted rubber drag tires with nylon wheels and air valves. Premium rubber chemistry for maximum...
€79.99
*
currently 9x in stock
Exotek 2088 - Losi 22 5.0 - Alloy Drag Differential Gear
Heavy duty machined 7075 alloy differential case for the TLR 5.0 G2 diff (NOT for the Losi 22S). Perfect machined roundness makes for a free spinning transmission and a must have for high powered drag racing applications. Extra internal...
€35.99
*
currently 4x in stock
Exotek 2082 - Losi 22S - Alloy Servo Mount
Solid design that installs easily onto your chassis and provides for easier maintenance and consistent steering action. Polished and anodized in factory black.
€35.99
*
currently 5x in stock
Exotek 2074 - FLITE Spur Gear POM - 48dp - 89 T - for Exotek spur gear hubs - 48mm diameter
The spur gears are 100% machined POM to insure true roundness, with extra interior machining to reduce overall weight for reduced rotating mass. Much stiffer and truer than molded nylon spur gears. Requires 3 pcs M3x6 button head screws...
€15.99
*
currently 9x in stock
Exotek 2075 - FLITE Spur Gear POM - 48dp - 94 T - for Exotek spur gear hubs - 51mm diameter
The spur gears are 100% machined POM to insure true roundness, with extra interior machining to reduce overall weight for reduced rotating mass. Much stiffer and truer than molded nylon spur gears. Requires 3 pcs M3x6 button head screws...
€15.99
*
currently 9x in stock
Exotek 2076 - FLITE Spur Gear POM - 48dp - 99 T - for Exotek spur gear hubs - 54mm diameter
The spur gears are 100% machined POM to insure true roundness, with extra interior machining to reduce overall weight for reduced rotating mass. Much stiffer and truer than molded nylon spur gears. Requires 3 pcs M3x6 button head screws...
€15.99
*
currently 8x in stock
Exotek 2077 - FLITE Spur Gear POM - 48dp - 104 T - for Exotek spur gear hubs - 56.5mm diameter
The spur gears are 100% machined POM to insure true roundness, with extra interior machining to reduce overall weight for reduced rotating mass. Much stiffer and truer than molded nylon spur gears. Requires 3 pcs M3x6 button head screws...
€15.99
*
currently 9x in stock
Exotek 2088 - Losi 22 5.0 - Alloy Drag Gear Box Set
High performance heavy duty gear box, motor plate with shock tower and alloy idler gear set for TLR 22 5.0-3.0 drag racing builds. All alloy gearbox construction keeps your gears in perfect alignment for true mesh and no gearbox flexing...
€119.99
*
currently 5x in stock
Exotek 2078 - Associated B6.3 - Alloy 7075 Differential Gear Housing
Heavy duty machined 7075 alloy differential case for the B6.3 - B6.2 (NOT for the B5). Perfect machined roundness makes for a free spinning transmission and a must have for high powered drag racing applications and extra internal...
€35.99
*
currently 2x in stock
Exotek 2083 - Losi 22S Drag - Front Bumper Set - Foam - for GPS Modul
Not for the TLR 22. Add protection to your Losi 22S drag car with our heavy duty alloy, carbon fiber and foam bumper set. This bumper set may just pay for itself in your first crash. Allows for optional mounting of SkyRC GNSS gps modules...
€41.99
*
currently 9x in stock
Exotek 2072 - F1 - Rear Wing extra light
Extra large wing elements for maximum aero downforce. The lighter weight helps reduce weight that overhangs past the wheels that also unsettles the car. Molded in black lower base and white wing element for higher visibility.
€23.99
*
currently 2x in stock
Exotek 2073 - Associated DR10 - Pro Body Mount Set Rear
Constructed of stiffer 3mm carbon fiber plate that attaches to an alloy mounting base for reduced body bouncing and flex. Simplified design makes it much easier to remove the transmission for servicing by eliminating the stock bracing...
€41.99
*
currently 8x in stock
Exotek 2081 - Losi 22S - Alloy Gear Box - for Rear Motor Series
The 'bullet proof' piece for your high powered Losi 22S build. Heavy duty machined alloy gearbox that keeps your gears in perfect alignment, your slipper and motor cooler and the wheelie bar pointed straight. Direct bolt on for the Losi...
€62.99
*
currently 2x in stock
Exotek 2037 - Associated B6.3 - Titanium Rear CVA Axles (1 pair)
Super light titanium axle set for the B6.3 and B6.2 drag race cars. Reduces the weight and rotation mass of your driveline for quicker acceleration. Over 40% lighter than the stock steel axles at only 3.5g each. FOR DRAG RACING ONLY -...
€31.99
*
currently 1x in stock
Exotek 2079 - Associated B6.3 - Bulkhead +1 High Roll Center
Heavy duty, 7075 alloy constructed 10gr front bulkhead for the B6.3-B6.1, T6.1, SC6.1 and all '6' series Associated 2wd buggies and trucks.. This HRC (high roll center) option raises the inner hinge pin by 1mm. Bulkhead has 2 settings...
€26.99
*
currently 2x in stock
Exotek 2018 - XRAY XB2 - Alloy Idler Gear - 25T
Must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along...
€17.99
*
currently 10x in stock
Exotek 2069 - XRAY XB2 - Alloy Idler Gear - 36T
Must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along...
€17.99
*
currently 1x in stock
Exotek 2070 - XRAY XB2 - Alloy Idler Gear - 38T
Must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along...
€17.99
*
currently 3x in stock
Exotek 2064 - TYPE A - GT Body 190mm 1/10
194mm 1/10 GT polycarbonate clear body and wing set. Exotek is excited to bring you the TYPE A , our 'retro' new contender for the highly competitive USGT / GT classes! A true classic style body we all miss, born from the days of JGTC...
€38.99
*
currently 12x in stock
Exotek 2066 - Losi 22S Pro - Alloy / Carbon Body Mount Set
Constructed of stiffer 3mm carbon fiber plate that attaches to an alloy mounting base that matches the stock geometry when assembled. Simplified design makes it much much easier to remove your transmission for servicing by aliminating...
€37.99
*
currently 2x in stock
Exotek 2067 - Losi 22S - Alloy 7075 Arm Mounts for rear toe adjustments (1 pair)
By using TLR 22 5.0 pivot inserts (TLR334063, not included) in the rear mount, you are able to adjust the rear toe in from 0° to 4° as well as the anti squat. True pro racer features with heavy duty construction along with tuning...
€38.99
*
currently 2x in stock
Exotek 2053 - Losi Tenacity/Lasernut - Alloy 7075 Rear Hub Set (1 pair)
Heavy duty 7075 alloy design maintains the suspension geometry setting, race after race. The design works either as the left or right hub (hubs are non-directional) and uses the stock hardware. Includes m3 set screw for removing any play...
€38.99
*
currently 16x in stock
Exotek 2054 - Losi Tenacity/Lasernut - HD Spur Gear - Hardened Steel - 40T
No more melted or stripped teeth - will last much longer than the stock plastic spur when running with high powered electronics.
€24.99
*
currently 7x in stock
Exotek 2055 - Losi Tenacity/Lasernut - Hex Set - Alloy 7075 (1 pair)
Precision machined alloy rear clamping 12mm hex set. Machined and anodized in factory gun metal. Do not overtighten M2 hardware.
€15.99
*
currently 1x in stock
Exotek 2062 - F1 ULTRA R4 / R5 - Front Sway Bar Set
Three sway bar weights are included (soft, medium, hard) so that the F1 ULTRA can be tuned for different tracks. Includes ball bearing supported mount that attaches to most standard F104 wings such as Montech, Tamiya, Protoform, etc....
€36.99
*
currently 5x in stock
Exotek 2063 - F1 ULTRA - Front Damper Tube Sets
New lightweight damper tubes for the F1 ULTRA to minimize bumpy asphalt track conditions. Extra lightweight and positioned for low center of gravity and tucked away to avoid frontal impacts for more durability. Machined POM barrels and...
€32.99
*
currently 9x in stock
EXOTEK R4060v2 - F1 ULTRA R4 - Graphite Lower Front Suspension Arm (1 pc) - V2
Updated v2 arm accepts the F1 ULTRA sway bar set without any modifications needed.
€16.99
*
currently 4x in stock
Exotek 2036 - Associated B6.3 - C-Block Brass Weight - black - 24g
Not for use with the B6.2 75mm arms. The block weighs 24g and helps to increase rear traction by adding weight at a low point under the gearbox.
€22.99
*
currently 5x in stock
Exotek 2034 - Associated B6.3 - Allox Idler Gear - 39T - Laydown
Must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along...
€15.99
*
currently 4x in stock
Exotek 2048 - Losi 22 5.0 - Allox Idler Gear - 38T - Laydown
Must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along...
€15.99
*
currently 7x in stock
Exotek 2065 - Associated B6 - Rear Drag Tower - 4mm Carbon - Laydown/Layback
Uses the stock rear shocks and allows for an upright angle for more stability.
€32.99
*
currently 3x in stock
Exotek 2033 - Losi TLR22S - Ladder Wheelie Bar Set - Carbon Fiber - Extra long
14.5" from axle to axle and NPRC legal. The longer bar gives you more stability, than the short stock wheelie bar, for straighter and faster passes without needing to let off the throttle as often. Quick 2 screw adjustment to raise or...
€66.99
*
currently 3x in stock
Exotek 2049 - Traxxas Slash Drag - Front Shock Tower - 4mm carbon fiber
Much stiffer for more stable high speed handling and uses the stock shocks and body mounts. Has optional shock mounting holes for more tuning options but requires removal of the stock body mount (use Exotek 1999 Slash bumper set with...
€32.99
*
currently 6x in stock
Exotek 2060 - Traxxas Slash Drag - Drag HD Steel CVD Axle Set
Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping out the stock plastic axle sets. The new diff cups uses 2 set screws instead of the straight pin to remove all of the slop and...
€32.99
*
currently 3x in stock
Exotek 2050 - Asso B6 / TLR22 - Octalock Spur Gear - 48dp - 81 Teeth
The spurs are made from Delrin and based on Associated style octalock type spurs for triple or double disk slippers. The spurs are 100% machined to ensure true roundness and are much stiffer than molded nylon spurs. Can be used with...
€15.99
*
currently 18x in stock
Exotek 2051 - Asso B6 / TLR22 - Octalock Spur Gear - 48dp - 84 Teeth
The spurs are made from Delrin and based on Associated style octalock type spurs for triple or double disk slippers. The spurs are 100% machined to ensure true roundness and are much stiffer than molded nylon spurs. Can be used with...
€15.99
*
currently 7x in stock
Exotek 2056 - Losi TLR22S Drag - 4mm Carbon Rear Shock Tower including Alloy Mount
The wider tower provides more options for mounting the shocks, such as more upright, but keeps the stock settings that match the stock geometry. 4mm thick carbon fiber for an extra stiff tower that attaches to an alloy base for super...
€51.99
*
currently 7x in stock
Exotek 2057 - Losi TLR22S Drag - 4mm Carbon Front Shock Tower
Heavy duty 4mm thick carbon fiber front tower that weighs only 10g. Factory racing looks and a much more rigid construction than the stock plastic tower for consistent handling on high grip tracks. Has an extra outer shock mount location...
€32.99
*
currently 5x in stock
Exotek 2059 - Losi TLR22S Drag - Rear Hex Set 7mm - Alloy 7075 (1 pair)
Wide clamping heavy duty hex sets (7mm each). Slightly wider width means more stability and allows easy mounting, without spacers.
€15.99
*
currently 11x in stock
Exotek 2032 - Losi TLR22S Drag - Rear Titanium Axle (1 Pair)
Super light titanium axle set for the Losi 22S Drag - NOT for the TLR 22 series! Reduces the weight and rotating mass of the driveline for quicker acceleration. Over 40% lighter than the stock steel axles at only 3.9g each. For...
€28.99
*
currently 3x in stock
Exotek 2047 - Associated DR10 - Alloy 7075 Differential Gear Case
Perfect machined roundness makes for a free spinning transmission and a must have for high powered drag racing applications. This case is much stronger than the stock plastic diff gear but not indestructible - it is important to use...
€34.99
*
currently 8x in stock
Exotek 2052 - Schumacher Cougar / Cat - Alloy 7075 HD Wing Mounts (1 pair)
Extra durable machined to be lightweight (9g total) and uses the stock wing spacer and hardware to mount your wing.
€31.99
*
currently 2x in stock
Exotek 2027 - Losi 22S - Drag Wheelie Wheels - Alloy / Delrin (1 pair)
The rim is machined from billet 6061 while the tires are machined from delrin. Each wheel weighs 8g and uses the stock 22S wheelie wheel bearings.
€30.99
*
currently 3x in stock
Exotek 2029 - Losi 22S - Drag Rear Hub Set - 7075 Black/Silver (1 pair)
The updated design works as either the left or right hub (hubs are non-directional) and also allows to raise or lower the hub height thanks to the standard and optional hinge pin holes. The upright ball stud mounting matches the stock...
€38.99
*
currently 2x in stock