No results were found for the filter!
P09X set is for "progressive" settings of the springs. P09X set includes 4 pcs of P09X plastic parts and 4 pcs of DIN915 M3X3 set screws. One of additional holes is for DIN915 M3X3 screw and has 3,1 mm distance to the main RHS screw. The opposite additional hole is for RHS-P M2 screw and has 3,7 mm distance to the main RHS screw. Please notice the helpful manual which is...
€8.50
*
currently 4x in stock
Will replace any kind of DT10 - offers 26 steps (which is a lot!)
€7.50
*
currently 9x in stock
Genuine Awesomatix part!
€3.00
*
currently 7x in stock
Sway bar mount. Can be used on old A800 kits, but it is necessary to change also: - lower deck (C01B-X, C01B-XA, C01B-XAH) - sway bar stopper AT142 - ball bearings B63SS You may need also different standard screws. Should be used only with the new lower arms (C04M1, C04AL1)
€12.50
*
currently 14x in stock
Awesomatix P13-4 Ball End set 18pcs. Spare/ replacement set for full car (TC & FWD kits) contains: 18pcs P13-4
€18.00
*
currently 44x in stock
A800 38T Pulley A bit more slim than P138 - official replacement for it.
€8.80
*
currently 14x in stock
Replaces P138 and P138-1. More precise. Narrow profile For A800 / A800X / A800MMX / A800R / A800FX Gear Diff. INFO: Doesn't fit for AT03B-X Spool!
€10.00
*
currently 33x in stock
P138A-LF 38T Pulley. Replaces P138LF and P138LFA More precise. Narrow profile For A800 / A800X / A800MMX / A800R / A800FX Gear Diff. INFO: Doesn't fit for AT03B-X Spool!
€11.00
*
currently 40x in stock
Spool Pulley Latest version - a bit more slim than regular.
€10.00
*
currently 4x in stock
Spool Pulley - will reduce friction. Latest version - more narrow than the previous one.
€11.00
*
currently 12x in stock
NEW
Successor and replacement for P13-4.
€3.00
*
currently 49x in stock
NEW
Successor and replacement for P13-4-S18. Spare/ replacement set for full car (TC & FWD kits)
€18.00
*
currently 44x in stock
Genuine Awesomatix spare parts!
€8.00
*
currently 29x in stock
To be used with the 1.2mm thin SCC lower deck only.
€7.50
*
currently 28x in stock
The composite front bumper which fits to the foam bumper P15H-4. The foam bumper is not included. The picture just shows how it works.
€6.50
*
currently 10x in stock
Body Post Set
€10.00
*
currently 59x in stock
Genuine Awesomatix spare parts!
€6.00
*
currently 36x in stock
Genuine Awesomatix spare parts!
€10.00
*
currently 8x in stock
Will fit to any A700 or A800 car kit.
€10.00
*
currently 14x in stock
P18 Ball Joint1 S x 2
€5.50
*
currently 3x in stock
Outer Battery Holder x 2
€8.50
*
currently 3x in stock
Genuine Awesomatix spare parts!
€6.00
*
currently 25x in stock
Inner Battery Holder x 2
€6.00
*
currently 1x in stock
Servo Arm
€3.50
*
currently 21x in stock
Servo Arm
€3.50
*
currently 12x in stock
Tuning Alu Sway Bar Stopper Set (4 pcs) Replaces the standard parts P42 which are made of plastic.
€14.50
*
currently 3x in stock
P46R Rubber Balls made out of special anti sticking rubber for GD2 (2pcs.) The P46R high precission Rubber Balls for GD2 will improve the volumen compensation of the Gear Diff. The result is more smooth and consistent operating of the Differential at any conditions.
€5.00
*
currently 33x in stock
Genuine Awesomatix spare parts!
€19.00
*
currently 2x in stock
Will fit also to A700 or A800.
€4.00
*
currently 18x in stock
Will fit also to A800. No thread lock necessary.
€4.00
*
currently 2x in stock
P63-R Damper Pistons for use in D3 and D2.2 Dampers (D2.2 requires AT41-2 Damper Vanes). New improved design for even better volumen compensation and sealing of the dampers. These Pistons are made of special anti sticking rubber. The result is more smooth and consistent operating of the dampers! contains: 4pcs A800-P63-R (colour of P63 parts can be either black or white)
€11.00
*
currently 11x in stock
Genuine Awesomatix spare parts!
€6.00
*
currently 40x in stock
Genuine Awesomatix spare parts! Optional P64S Rear Body Holder for Awesomatix A800R. This version is softer and more durable, while being lighter (~5g.) as the standard P64 (~6g.).
€7.00
*
currently 18x in stock
Genuine Awesomatix spare parts!
€6.00
*
currently 25x in stock
Optional P74 Progressive Spring Holders set. Can be installed directly on top of the AM242 Damper case instead of C45F-PS or C45R-PS. Eliminates reduction of the chassis flex.
€6.00
*
currently 1x in stock
Genuine Awesomatix part!
€2.50
*
currently 8x in stock
A800-PSS set is designed to add 15% or 25% progressivity into the originally linear action of SPR01S and SPR01 springs in all A700/A800 cars. With the A800-PSS set the initial action of spring is softer at the beginning of the compression and becomes progressively harder when the suspension get compressed during downtravel of the car. Our tests showed that the car with PSS...
€30.50
*
currently 26x in stock
Awesomatix PSSX Progressive Spring System set is designed to add 30% progressivity into the originally linear action of SPR01S and SPR01 springs in all A700/A800 cars. Updated version of the previously known "PSS set". The PSSX set comes with the new ST69X-30 Screw with wider cap that provides 30% progressivity across an increased range of suspension travel and suspension...
€25.00
*
currently 34x in stock
Ride Height Screw x 4
€4.00
*
currently 6x in stock
M2.5x10 Button Head Screw x 5
€3.50
*
currently 14x in stock
M2.5x8 Button Head Screw x 5
€4.00
*
currently 28x in stock
M3x10 Button Head Screw x 4
€4.00
*
currently 42x in stock
M3x12 Button Head Screw x 4
€3.50
*
currently 10x in stock
Genuine Awesomatix part!
€3.50
*
currently 3x in stock