This set also allows the ESC to be placed in front of the motor to reduce the car's moment of inertia. FSS also provides a bit more torsional flex for the front end of the car and a bit less weight. Additionally the range for Ackermann is extended to 1,5mm instead of the 1,0mm from the std steering set.

22T Bevel Gear

27T Bevel Gear

25T Bevel Gear

20T Plastic Gear x 2

20T Steel Gear x 2

10T Steel Gear x 4

GD2 Satellite Gear x 4

GD 2 Bevel Gear x 2

Genuine Awesomatix part!

The Awesomatix A12 Gear Diff is specially designed for the use in the Awesomatix A12 1/12 Scale Pan Car. With the 1/4" main shaft, this Gear Diff is also suitable for most other brand 1/12 Scale Pan Car's. This Diff is suitable for standard TC and 1/12 spur gears of many brands. The overall weight is class leading with only 21g. to ensure the best performance on the track....

A800 Gear Diff Set Already including the new outdrives ST23X and new sealings P46R Replaces GDB2

The Horizontal Rear Bodypost Set (HRB) lowers the center of gravity. This improves the handling and cornerspeed of your car which leads to faster laptimes. Furthermore the bodyshell will become more stiff in the rear end section and has less deflection at high speed at thus. Fits all A800 models beside A800FX.

Genuine Awesomatix part! HRC (High Roll Center) set is +2mm higher roll center measured from the lower face of AM1204 compared to ELRC. HRC is recommended for medium - med/high grip conditions. The car will be more free and keeps more cornerspeed. contains: 2pcs ST1235 2pcs ST1241 1pcs ST1242-1 1pcs ST1243 2pcs SH5.5X7.7X0.05

IFJ was designing for reducing of the friction between the spool outdrives and the dogbones. Due to the reduced friction in IFJ the front suspension is also a bit softer and smoother on power and under braking. According to reports from tests drivers IFJ are "super to drive, smoother and provide a bit more steering, faster laptimes and less noise". IFJ have good reliability...

IRJ reduces the friction between the outdrive and the dogbone. It increases the efficiency of whole transmission which is an advantage in all situations. Especially in Stock classes the combination of IFJ and IRJ systems will improve the acceleration to the Topspeed. Due to the reduced friction in IRJ the suspension is softer and smoother at car's acceleration and braking....

Genuine Awesomatix part! LRC (Low Roll Center) set is +1mm higher roll center measured from the lower face of AM1204 compared to ELRC. LRC set is the kit's set for A12WC and A12X cars. LRC is recommended for low-medium - medium grip conditions. contains: 2pcs ST1254 2pcs ST1255 1pcs ST1256 1pcs ST1257 2pcs SH5.5x7.7x0.05

Awesomatix A12 LWRD Lightweight Rear Damper set Total weight of the LW Damper set is ~8,7g. This is a reduction of ~18g. compared to the std Damper (~26.7g) The LWRD allows to change the weight BIAS of your car and further adjust it by using additional weights. Furthermore, the use of Alloy material near the Motor will have less interference of the magnetic field, which...

BD O-Ring x 2

11mm O-Ring

14mm O-Ring

GD O-Ring x 2

GD O-Ring Soft x 2

This O-Ring is made out of a new rubber material which is even more durable and less affected by silicon oil. The "V" O-Rings are easy to distinguish as they have a slight shade of brown.

5mm O-Ring x 4

U-Ring for #6 and #3 dampers x 4

For AM240 Damper Cover. Can be used instead of OR1705V.

FCB O-Ring x 2

O-Ring 9mm

Spare part for FBS

Genuine Awesomatix spare parts!

Genuine Awesomatix part!

Optional Awesomatix 1.2x7mm O-Ring for use with SCS set. The o-ring acts as additional ~10 gf/mm side springs but without affecting the rear vertical suspension rate. Only use in combination with SCS set. contains: 1x A12-OR127

13mm O-Ring

OR14V Suspension Arm O-Rings are designed to replace the P07 Arm clip. The advantages are less weight, more reliable at accidents, and at certain conditions more grip due to elasticity at suspension action.

Same part as OR14V - but only 2 pcs included instead of 8.

Genuine Awesomatix part!

Awesomatix A700-OR152 - 2x1.5mm U-Ring Will be used for AT78. OR152S can be installed in any direction but I prefer the open side of the U into shock.

Genuine Awesomatix part!

Genuine Awesomatix part!

This O-Ring is made out of a new rubber material which is even more durable and less affected by silicon oil. The "V" O-Rings are easy to distinguish as they have a slight shade of brown.

Awesomatix A700-OR15M - Damper Output O-Ring

Genuine Awesomatix spare parts!

This O-Ring is made out of a new rubber material which is even more durable and less affected by silicon oil. The "V" O-Rings are easy to distinguish as they have a slight shade of brown.

This O-Ring is made out of a new rubber material which is even more durable and less affected by silicon oil. The "V" O-Rings are easy to distinguish as they have a slight shade of brown.

Spare parts for ST122-1 damper screws.

Genuine Awesomatix spare parts!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix spare parts!

Spare part for FD.

Genuine Awesomatix part!

Genuine Awesomatix part!

Ball Joint-1 x 4

Ball Joint-2 x 4

Arm Ball Cap x 5

Arm Ball Cap x 5

Arm Hasp x 4

Sway Bar Joint x 4

Downstop Collar x 5