Genuine Awesomatix part! Weight of: C1206 - 4.63g ST1212 - 7.56g

Genuine Awesomatix spare parts!

Spare part for FD.

Genuine Awesomatix spare parts!

C127S-G Top Deck (1pcs) for use with AM177 Motormount. Soft version. Made from 1.5mm Glassfiber Material. Two Top Decks are needed for one car. (Front and Rear) INFO: It's required to modify/sand/shorten the rear ST24 Ballstud thread in the rear Bulkhead. Otherwise you are unable to screw down the Top Deck properly.

Up to 3pcs of TW5 5g.Tungsten weights (not included) can be placed in the chassis. The weights should be installed via super thin double sided tape (not included).

Optional link for VTD set. It blocks the side movement of the VTD. Same as ST55 in diagonal position for normal C27X deck. You will need 2x ST019 special screw to use it! They are NOT included. Suitable for A800 and A800X.

FFG Top Deck Link

Genuine Awesomatix spare parts! C204R = fits front left and rear right C204L = fits front right and rear left This set contains two of each - made for one car.

C204R-1 = fits front left and rear right C204L-1 = fits front right and rear left This set contains two of each - made for one car. It narrows the track width of the car and is especially recommended for lower grip levels. The arms have a "-1" engraved on the lower side for easy identification.

Genuine Awesomatix spare parts! C204R = fits front left and rear right C204L = fits front right and rear left

C204R-1 = fits front left and rear right C204L-1 = fits front right and rear left It narrows the track width of the car and is especially recommended for lower grip levels. The arms have a "-1" engraved on the lower side for easy identification.

Genuine Awesomatix spare parts! C204R = fits front left and rear right C204L = fits front right and rear left

C204R-1 = fits front left and rear right C204L-1 = fits front right and rear left It narrows the track width of the car and is especially recommended for lower grip levels. The arms have a "-1" engraved on the lower side for easy identification.

FFG Top Deck Narrow

A800 Carbon Top Deck Stiffener (rear)

Genuine Awesomatix spare parts!

Genuine Awesomatix Spare Parts!

Optional Awesomatix A800FX Evo Long Top Deck. Also suitable for A800FX car. Offers the possibility to change the flex characteristics of the car. Additionally it offers the possibility for cutting between both rear ST019 mounting holes. This will create a split Top Deck similar to the kit version, but with more front flex.

Spare part for the MMCX-2 kit. Can be used also as optional for the old MMCX kit.

C27MMS-1 Top Deck for A800X Middle Motor conversion. This Version is softer and offer more flex than C27MM2. It's designed to be used with AM102 Top Deck Stiffener. The holes for screwing AM102 are designed to allow the use of normal SB3x5 screws, as well ST019 Top Deck Screws. This allow to use different flex options in this area. Specialy recommended for use with...

Optional Awesomatix A800MMX Long Top Deck. Offers the possibility to change the flex characteristics of the car. Additionally it offers the possibility for cutting between the rear ST019 mounting holes. This will create a split Top Deck similar to the kit version, but with more front flex.

Optional Full Length Top Deck for A800MMX and A800R. Made from 2.0mm Glassfiber Material.

Optional Full Length Top Deck for A800MMX and A800R. Made from 2.0mm Glassfiber Material.

Graphite Upper Deck

For Awesomatix DL and DL-A. Can be used as replacement for C27X

VTD Topdeck

FFG Carbon Rod

FFG Carbon Rod soft

Genuine Awesomatix spare parts!

C36 include 2pcs of 2.0mm thick carbon spacers to mount between chassis and Battery Holders. This option part raise the whole Battery Holder by 2mm and secure better hold for Batteries with recess areas at the plug side.

Genuine Awesomatix spare parts!

Spare part for APS when it's used in A800R.

Genuine Awesomatix spare parts!

Spare part for APS when it's used in A800R.

Genuine Awesomatix part! Reduce weight and rotating mass. The weight difference between graphite and spring steel is around 3g. Less weight => better acceleration More weight => better rear traction

Awesomatix A700-D2.1 - Damper

Diff Cover S Set

Damper Gauge

Damper Gauge

The diagonal link reduces the S-type bending of chassis but doesn't affect on the torsional flex. DL set set includes: C27X - 1 pcs AM107 - 1 pcs AT74 - 1 pcs ST019 - 1 pcs AT21S - 1 pcs P13-4 - 2 pcs SB3X8 - 2 pcs SS3X8 - 1 pcs

The diagonal link reduces the S-type bending of chassis but doesn't affect on the torsional flex. DL set set includes: C27X-1 - 1 pcs AT97 - 1 pcs AT21 - 2 pcs ST019 - 1 pcs P13-4 - 2 pcs SF3X8 - 1 pcs

Diff Cage

Bearing Housing x 4

Motor Mount Collar

FFG Collar x2

Awesomatix DT10+1.0 Bearing Housing - provides +1 mm higher position of the diff compared to kit's P110 Bearing Housing. Recommended for use on the rear of the car. Provides more on-power steering and increases rotation at certain track conditions. DT10+1.0 were used by Simon Lauter in his WC2024 winning A800R car.

A800 Bearing Housing (2 pieces) DT10-2-1 is the replacement for DT10-2-1 which has been slightly modified.

A800 Bearing Housing (2 pieces) DT10-2 is the replacement for DT10 which has been slightly modified.

Spare part for LS1

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Spare part for LS1

Spare part for FD.

EHRC (Extra High Roll Center) set is +3,8mm higher roll center measured from the lower face of AM1204 compared to ELRC. EHRC is recommended for med/high - high grip conditions. The car will rotate more over the rear end and increases steering. contains: 2pcs ST1244 1pcs ST1249 1pcs ST1250 2pcs ST1261 1pcs ST1262 2pcs ST1251 1pcs ST1253 2pcs SH4X5.5X0.05

Genuine Awesomatix part! ELRC (Extra Low Roll Center) set is what we used in the first A12 car. It is a 0mm positioned roll center measured from the lower face of AM1204. ELRC set is optional for A12WC and A12X cars. ELRC is recommended for low - medium grip conditions. The car will generate more grip by the increased chassis roll.

The FBS set consists of two ball studs. It's a very unique design of a dynamic acting ball stud for the suspension. The O-Ring inside the capsuled steel housing allows a movement of the actual ball stud into every direction. Furthermore the O-Ring provides the needed damping effect. It can be beneficial in certain conditions, such as lower grip or on very special...

1. FD set provides an additional torsional flex of the car's end where it is installed. 2. FD set provides the adjustable damping of the chassis's deformations caused by the torsional flex. 3.The damping level of the FD set is adjusted by choice of the silicone oil inside the damper and by choice of the pivoting hole on the arm of the FD rotor. FD set is recommended for...