The Belt Anti Skip set (BAS) is designed for Modified racing purpose with "big horsepower" and/or high traction conditions. It will support the rear belt with an additional ballbearing and prevents 100% from Belt skipping in every possible scenario. Info: This part/set fits only with AM177 Motormount. Take care: In the manual this item is shown as AM111. AM111 is only the...

13x 6x10mm 1x 4x8mm

High quality Ball Bearings with Si3N4 ceramic balls.The optimum to reduce the friction of your A800 drivetrain! Especially usefull for any stock class competition where the lowest friction of the drivetrain will result in higher topspeed and more consisten power for the runtime. Black Rubber seal on one side. Metal seal on the other side. BBS-1C set includes: B106RC/Z -...

Awesomatix A700-BC1 - Battery Clamps Set V2019 with short posts for ULCG batteries (18.5mm battery height). If you want to user standard or LCG batteries (25mm / 22.5mm height) you need to use additional shims which are not included.

The Body Downtravel Limiter set gives the possibility to setup an bodyshell downtravel stop via the included SC2x15 screws. It reduces bodyshell scrubbing on the ground and tire contact on the inside of the shell. The advantages are better high speed steering and increased stability. The length of the SC2X15 screws in this set is optimal for the most popular current TC...

A800 BANDO Rear Belt - 189mm

A800 BANDO Rear Belt - 189mm

Genuine Awesomatix spare parts!

Front and rear belt is the same when used with the MMCX Conversion Kit.

Front and rear belt is the same when used with the MMCX Conversion Kit.

A800 BANDO Front Belt - 513mm

A800 Front Belt - 513mm

BW10 Weight to install at the electronics side on AM177 Motormount. contains:

The BW22 Battery Holder set (2pcs) is especially designed for the use of ULCG Batteries (Stick Type) in the A800 Car Platform. This Battery Holders are made of brass material to keep the balance of your car by useing very light ULCG Batteries. BW22 is designed for the use with carpet/high traction oriented alloy chassis. Weight: BW22 = 22g per holder (Weight of set = 44g)...

The BW22R Battery Holder set (2pcs) is especially designed for the use of ULCG Batteries (Stick Type) in the A800R Car Platform. This Battery Holders are made of brass material to keep the balance of your car by useing very light ULCG Batteries. Weight: BW22R = 22g per holder (Weight of set = 44g)

Rear stiffener which will also rise the total weight bei 27g.

The BW52 Battery Holder set (2pcs) is especially designed for the use of Shorty Batteries (and ULCG Shorty) in the A800 Car Platform. This Battery Holders are made of brass material to keep the balance of your car by useing Shorty Batteries. BW52 is designed for the use with carpet/high traction oriented alloy chassis. TIP: We recommend to mount BW52 with 0,2-0,5mm shims...

The BW52R Battery Holder set (2pcs) is especially designed for the use of Shorty Batteries (and ULCG Shorty) in the A800R Car Platform. This Battery Holders are made of brass material to keep the balance of your car by useing Shorty Batteries. Weight: BW52R = 52g per holder (Weight of set = 104g)

Weight to install at the motor side on AM177 Motormount.

Weight to install at the motor side on AM177 Motormount.

BW95 is a new Floating Front Weight for the A800FX & A800FX Evo cars. This additional weight helps to adjust the front/rear weight distribution of the car for different track conditions. Additionally it improves the front flex of the car, as BW95 replaces the AM88//R Shock Holders. This improved front flex helps with better overall steering and front end grip! BW95 doesn't...

A800 Carbon Lower Deck - 2.25mm

A800 Alu Lower Deck - hart

Genuine Awesomatix spare part!

Genuine Awesomatix spare part!

Made of 1.2mm hardened spring steel, the chassis combines previously unmatched lower center of gravity and excellent flex characteristics. Extensive refinement of the production process enabled the required chassis flatness and hardness to be achieved. The result is an incredibly long-lasting chassis that will outlast its carbon and aluminium counterparts due to being more...

Special version for the long suspension arms (C04M1+9.0 and C04M1+8.0). The longer suspension arms are great when traction is needed. It still features mounting holes for the short standard arms - so you can use both! Can be used also in the old A800. You need to change additionally: - P12X - B63SS - AT142 Should be used only with the new lower suspension arms (C04M1,...

Special version for the long suspension arms (C04M1+9.0 and C04M1+8.0). The longer suspension arms are great when traction is needed. It still features mounting holes for the short standard arms - so you can use both! Whats the difference between V1 and V2? The Cutouts/Design is changed to offer more response and better steering feeling combined with the high corner speeds...

Genuine Awesomatix spare parts!

Genuine Awesomatix Spare Parts!

Medium option. Softer than the kit Alloy. Stiffer than the C01FXR-C Carbon.

2,2mm Carbon Chassis for A700L2 and A700 Evo II cars. C01L2L Lower Deck is suitable also for long arms installation. We recommend to start with C04M1+8.0 arms or C04AL1+8.0 arms on front and on rear. Can be used only with MM2 - Evo II Motor Mount Set.

Awesomatix A700-C02-2 - Top Deck L2

Top Deck T

Will also fit to any kind of A700 / A800. C04AL+0.5 has been replaced by C04AL1+0.5. They should not be mixed. Same geometry, different shape. 0.5mm longer than C04AL1. A longer suspension arm will offer more overall grip and traction.

Will also fit to any kind of A700 / A800. These arms are mainly for low-med traction conditions. We will use these arms with AT21+0.5S balls in narrow position to keep the overal width within the legal 190mm. For more grip on rear end ( easy to drive car) you shoul use C04AL1+1.5 on rear with C04AL1+0.5 on front ( front balls are as usuall for these arms). For more steering...

+9.0mm will be usually used in the front +8.0mm will be usually used in the rear INFO: Only suitable for following Chassis -> C01B-X-LA / C01B-XA-LA / C01B-XAH-LA / C01B-XAH2-LA / C01B-X-MM

+9.0mm will be usually used in the front +8.0mm will be usually used in the rear INFO: Only suitable for following Chassis -> C01B-X-LA / C01B-XA-LA / C01B-XAH-LA / C01B-X-MM

+9.0mm will be usually used in the front +8.0mm will be usually used in the rear INFO: Only suitable for following Chassis -> C01B-X-LA / C01B-XA-LA / C01B-XAH-LA / C01B-X-MM

Spare part for HRB.

The Flex Carbon Bumper is designed for use with P14-1-R Lower bumper. Requires two pcs ST019 (not included) to connect to the AM278 Bulkheads. The use of ST019 offers different front flex and removes possible tweak of the bulkheads in this area.

C07A - Carbon Bumper A is designed for use with P14-1X Lower bumper. The new design offer support to Bulkheads to prevent Chassis from bending on front area at Crashes. This part don't allow combination with normal P14. You will need 4x SH175 shims + 2x SB3X6 screw to use the support. With the latest change (V3) Awesomatix updated the footprint just a little bit. They...

Replaces the kit part which is made of composite.

Genuine Awesomatix spare parts!

This part will allow to adjust the height of the rear body posts. Standard height is the same like C105. It's possible to adjust +/- 3mm.

Genuine Awesomatix spare parts!

Suitable for A800FX / A800FX Evo and A800FXR. Should be installed with 3pcs ST019 for best performance (not included).

Genuine Awesomatix Spare Parts!

Genuine Awesomatix part!

Genuine Awesomatix part! Needs to be used with C1205-6.0

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part!

Genuine Awesomatix part! Needs to be used with C1201-6.0!

Genuine Awesomatix part! Tech Tipp for A12 drivers which are searching for C1205-1.5: C1205X has the exact same sizes as C1205-1.5 except for the 1,25 mm depth recess for front pivot balls. So C1205X is a direct replacement. Customers just need to turn the plate in the direction to have the milled out area on the upper side and the flat surface on the lower side.

Genuine Awesomatix part! Suspension Plate with 1,5mm shorter front wheelbase. It increases the initial steering and reaction of the car and provides a faster direction change. Recommended especially for low, low-med, medium traction conditions.

Genuine Awesomatix part!