ALU NUT FOR 1/8 OFF-ROD SYSTEM (4)

ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM

CHASSIS DROOP GAUGE BLOCKS 20 MM Honeycomb (2)

Toe In Setup Plate - 1/8 - Offroad Buggy

New from Arrowmax and made for 1/10th vehicles is the quick camber gauge. Designed for quick and easy camber angle checks the 1-piece gauge allows to measure angles of 1.5, 2.0 and 2.5 degree by simply placing the gauge alongside the wheel. The tool is made from CNC-machined aluminium , Honeycomb-design black and golden surface treatment.and it comes laser-engraved for easy...

ALU SET-UP WHEEL FOR 1/10 ON-ROAD CARS - Black Golden (4pcs)

CNC-machined premium-quality aluminium setup wheels for electric and nitro 1/8 touring.

RIDE HEIGHT GAUGE 2MM TO 15MM (BELEVED) - Black Golden

CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/10 CARS (10mm) Black Golden

CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/8, 1/10 CARS (20MM) Black Golden

Chassis Droop Gauge - Offroad (30MM) Black Golden

Arrowmax has introduced the black and golden Chassis Balancing Tool to achieve a perfectly balanced side-to-side RC car. On most touring car chassis, there will be small dimples or holes in the centre on the front and rear. Features: Checking & optimizing chassis balance Fits on-road & off-road cars Small and lightweight Easy to use CNC-machined Made of high-quality...

Allows you to perform quick & easy camber checks for 3 most frequently-used wheel camber angles: 1.0°, 2.0°, 3.0°.

Ultra Step Ride Height / Droop Gauge TC - Black Golden

SET-UP SYSTEM FOR 1/10 TOURING CARS - Black Golden Honeycomb LE

Setup System for 1/10 Offroad Cars incl. Bag - Black Golden Honeycomb LE

Setup System for 1/8 Offroad Cars incl. Bag - Black Golden Honeycomb Suitable for 1:8 buggy. NOT for truggy. For truggy please use AM-170060 as addtional part.

Setup System for 1/8 Onroad Cars incl. Bag - Black Golden Honeycomb Limited Edition

Alu Nut for 1/10 SET-UP System Black/Golden (4 pieces)

SET-UP Station Thumb Screw Set Black/Golden (4 pieces)

Chassis Droop Gauge Blocks 20mm - V2 - Black Golden (2 pieces) Designed in the latest 2017 black and golden Honeycomb Design.

Chassis Droop Gauge Blocks 30mm - V2 - Black Golden (2 pieces) Designed in the latest 2017 black and golden Honeycomb Design.

20-30mm Adjustable Ride Height Gauge - Black Golden

14-20mm Adjustable Ride Height Gauge - Black Golden

Useful tool to quickly adjust the camber. The adjustment is progressiv. You can check the current camber (loosen up the nuts and place the gauge to read the camber) as well as adjust it as needed. Adjustable from -10° to +6°

Useful tool to quickly adjust the camber. The adjustment is progressiv. You can check the current camber (loosen up the nuts and place the gauge to read the camber) as well as adjust it as needed. Adjustable from -10° to +5°

30-45mm Adjustable Ride Height Gauge - Black Golden

Setup Station Thump Screw Set (4 pieces)

We are proud to present to you the all-new 4D setup system. It is important to have the best and most precise setup system. The redesigned 4D Set-up System allows you to comfortably measure and adjust camber, caster, toe-in/out, track width and steering throw symmetry. And It suits all of 1/10 onroad car. In the past year, we have witnessed the on-going touring car trend...

Caster Pointer Adapter for SET-UP SYSTEM - Serpent X20 Set of two pointers. Please check if you need two or four pieces - depending on your setup system.

Caster Pointer Adapter for SET-UP SYSTEM - Serpent X20 Set of two pointers. Please check if you need two or four pieces - depending on your setup system.

Caster Pointer Adapter for SET-UP SYSTEM - Awesomatix A800/Mugen MTC2/XRAY X4 Set of two pointers. Please check if you need two or four pieces - depending on your setup system.

The all-new 4D setup system will be available for the 8th scale on-road classes! The Set-Up System allows you to measure and adjust camber, caster, toe-in/out, track width and steering angle symmetry with high precision. It is a hassle when racers have to remove the rear end of their body post in order to check the toe-in of their 8th scale on-road cars. With that in mind,...

Ride height gauge - 3-7mm - usable on both sides - alu - red - (1pc) It is ONLY ONE Ride height gauge . This is usable on both sides. A side: 3-7mm in 0.5mm increments B side: 3-7mm infinitely usable because of wedge shape

Long reach style ride height gauge makes for much easier ride height measurements for pan car style chassis cars. The longer reach helps to clear the lipo and side links so that the ride height is not skewed by the gauge hitting the lipo and links. The 2 sided gauge measures from 3.5 - 6mm and is made of precision machined alloy.

The caster doodles provide easy to read "pointers" that tell you the caster degrees of the front steering knuckles when used with 1/10 TC type camber setup gauges as shown (not included). Works with setup systems by HUDY, Arrowmax or similar build 1/10 TC setup stations (not included, but required). One pair of finely machined alloy units that simply slides onto the stock F1...

Made for a more precision centering of the wheels when using the HUDY tool 102375. Will replace the standard locknut.

Titan Cutting Tool for tire truer (e.g. HUDY) As good as the (discontinued) HUDY 102067!

Allows for quick and easy camber checks for the most frequently-used wheel camber angles: 1, 2 and 3°.

Made for a more precision centering of the wheels when using the HUDY tool 102375. Will replace the standard locknut.

Special tool to adjust the camber at RX8 version with a hole in the upper suspension arm / turnbuckle. 2.0mm diameter - may also fit for other cars with same diameter.

• chassis droop gauge support blocks for 1/8 and 1/10 cars • 2 pcs in a set • allows adjustment of front/rear droop when used with #107711 Chassis Droop Gauge for 1/8 on road and with #107720 Chassis Droop Gauge for 1/10 off-road

• chassis droop gauge support blocks for 1/10 cars • 2 pcs in a set • allows adjustment of front/rear droop when used with #107712 Chassis Droop Gauge for 1/10

Place the front support block below the servo saver, and place the rear support block below the rear suspension mounting. Using the #107717 Chassis Ride Height & Droop Gauge 0 to -13 mm for 1/8 Off-Road with elevated scales, measure the droop under the wheel axle hex. Replacement for HUDY 107703

• chassis droop gauge for 1/8 and 1/10 cars • allows adjustment of the front/rear droop when used with #107701 Chassis Support Blocks for 1/8, 1/10

• chassis droop gauge for 1/10 cars • allows adjustment of the front/rear droop when used with #107702 Chassis Support Blocks for 1/10

CHASSIS RIDE HEIGHT GAUGE 2 MM TO 15 MM (1 MM STEPPED)

ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM must be used with #107702 Chassis Support Blocks for 1/10

CHASSIS RIDE HEIGHT GAUGE 0 MM TO 15 MM (BEVELED)

ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE 3.8-8.0mm - 0.2mm increments

• allows adjustment of front/rear droop (downstop) when used with #107704 HUDY Chassis Droop Gauge Support Blocks for Off-road Cars • droop range (0-13mm)

Stepped surfaces in the 2.6-5.6mm range have 0.2mm increments for fine adjustment.

One-piece highly-accurate tool for quick downstop checking has an integrated support block that supports the chassis while the stepped scale indicates the downstop setting. Includes a downstop range of 1.0-6.5mm.

CHASSIS RIDE HEIGHT GAUGE 17MM TO 30MM FOR 1/8 & 1/10 OFF-ROAD

CHASSIS RIDE HEIGHT GAUGE for Offroad

CHASSIS RIDE HEIGHT GAUGE for Offroad

CHASSIS RIDE HEIGHT GAUGE for Offroad

Allows you to perform quick & easy camber checks for 3 most frequently-used wheel camber angles: 1.5°, 2.0°, and 2.5°.

Adjustable from -5° to +10° Suitable for 1:12, 1:10 and 1:8 onroad.

Adjustable from -5° to +10° Suitable for 1:12, 1:10 and 1:8 onroad. 1:10 and 1:8 offroad (up tp 110mm tire diameter)