Suitable for a range from 3 to 42mm ride height.

Suitable for a range from +3 to -10 degrees camber. Suitable for 1:8 GT / Buggy and also 1:10 Offroad / Onroad. The inner graphite part is removeable to work also with a longer wheel axle (like 1:10 Offroad)

Suitable for a range from 20 to 30mm ride height. Best use with 1:8 Offroad.

Suitable for a range from 14 to 20mm ride height. Best use with 1:10 Offroad.

Suitable for a range from 30 to 45mm ride height. Best use with 1:8 Truggy Offroad.

-This handle made with high strength carbon fiber bring benefit to lightweight and high strength. Ensure it won't bend and durable. -Only can use with either TT-116-A/B adjustable ride height gauge, help you easier to put the ride height gauge to the Centre of chassis.

Pro level setup board system Use to level your setup board when it on inclined surface. Make it working on flat and level surface for correct geometry setup. Steps to use: 1.Mount bracket First，adjustment bracket, installed in the four corners of the setup board, relatively thin setup board can be used to match the shims, to be fixed (shims can fill the thickness, to ensure...

Spare level for the TT-126 set.

10mm Chassis Droop Gauge Blocks is used to measure the height of the lower stop of the swingarm and the axle height of the output shaft, which is one of the indispensable tools for tuning the vehicle to improve the accuracy and consistency when tuning the suspension system of the shock absorber.

Domino Droop Gauge Extender 10mm used with TT-129-A, each stacked layer adds 10mm, convenient to realize the needs of frame data tuning changes.

Features: 1. Carbon fiber material lightweight and portable design; 2. Exquisite shape design, streamlined appearance, practicality and aesthetics coexist; 3. Precise regulate and measurement, meet different regulate needs; 4. Optimize driving performance and stability to ensure the best handling performance and tire life

Features: 1. Carbon fiber material lightweight and portable design; 2. Exquisite shape design, streamlined appearance, practicality and aesthetics coexist; 3. Precise regulate and measurement, meet different regulate needs; 4. Optimize driving performance and stability to ensure the best handling performance and tire life

Made for 1/8 GT cars - like Serpent Viper 989 or XRAY RX8. NOT for 1:8 Onroad cars like Serpent SRX8 GT or XRAY GTX.

For 1:10 touring cars

For 1:10 onroad and offroad cars with a tire diameter less than 80mm.

3mm and 4mm are the most popular sizes in 1:10 scale.

Size: 430 x 300 mm Thickness: 19mm Suitable for: 1/10 onroad + 1/12 Suitable measuring sticker: TI-30112 Please note: It’s impossible to get a 100% flat board made of this kind of wood. Team Titan will inspect all boards before shipment – so they are Q.C. approved.

Size: 540 x 340 mm Thickness: 19mm Suitable for: 1/8 Onroad + GT (not suitable for Truggy) Suitable measuring sticker: TI-30112 Please note - the sticker is also used for the 1/10 board, so it is smaller than the 1/8 board. Please note: It’s impossible to get a 100% flat board made of this kind of wood. Team Titan will inspect all boards before shipment – so they are Q.C....

Suitable measuring sticker for Team Titan Setup Boards. Please note - the sticker is used for the 1/10 board as well as the 1/8 board, so it is smaller than the 1/8 board.

Designed for quick and easy camber angle checks the 1-piece gauge allows to measure angles of 0.5, 1.0, 1.5 and 2.0 degree by simply placing the gauge alongside the wheel.

Made from 3mm high-quality carbon with a diameter of 61.8mm. Incl. 4pcs of aluminum nuts for easy assembling.

The droop gauge with 10mm chassis blocks and droop measure wheels is lightweight and small, ideal for transportation. It can measure the axle height from 21.5 - 24.5mm in 0.2mm steps. The set includes: - 1 droop gauge - 2 chassis blocks 10mm - 2 droop measurement wheels

Fits setup system Arrowmax 3D.

WIRC P-One PT0009 - Alu Turnbuckle Wrench - 3mm / 4mm

WIRC P-One RC0017 - Alu Car Stand - 35mm Height

Premium 4mm Carbon Fibre Camber Gauge intended for 1/10 Off Road Buggy. 0.5 Degree Increments, notches for axle clearance and a full engraved WS logo for one practical and tasty looking tool for your toolbox.

Suitable for 1:10 touring cars!

Suitable for 1:10 touring cars!

Suitable for 1:10 touring cars!

Suitable for 1:10 touring cars!

- height measurement from 2 to 9mm - droop measurement from -3 to 10mm - 10mm support blocks Optimized for 1:10 Touring.

- height measurement from 1 to 9mm - droop measurement from 0.5 to 9.5mm (no support blocks needed) Optimized for 1:10 Touring.

- height measurement from 3.6 to 8mm - droop measurement from 1 to 9mm (no support blocks needed) Optimized for 1:10 Touring.

1mm increment. Please note that a 15mm support block will be needed.

UPDATE - V3 2022: The setup system does now have a working camber scale. The old version was wrong / out of range. Description: Our Setup System has been redesigned to give r/c racers accurate measurements for their 1/10 on road chassis's. We improved the look and made it even more lightweight. This time we incorporated bearings to keep everything smooth so the friction of...

Setup your M-Chassis car with precision by using these setup wheels! By using these M-Chassis setup wheels you will be sure that the geometry will be as per racing conditions so you will get the most accurate readings possible! Used to measure camber and other things. Also comes with setup wheel nuts, so you don't scratch these setup wheels if you were to use serrated nuts....

Spare part for YT-0140.

Replacement setup station lock nuts for either Yeah Racing Setup Station or others. Can also be used with setup discs for 1/10 touring cars!

Simple yet effective tool for marking wheel wells for easy cutting out, besides wheel wells you can also mark the height of how far it is off the ground. Which is sometimes required sometimes racing on carpet tracks and to avoid your body scraping on the floor and affecting performance! Besides for touring cars, there is an marked section in the center for marking mini...

For the use with 1:10 touring cars. Accurately measure the downstop across all your cars with this downstop gauge which allows you to measure your axle height from the bottom of your chassis! If that is not to your liking, the traditional height from the bottom of the arm can still be measured with the measurements on the gauge paired with traditional 10mm droop blocks....

Accurately check if your 1/8 Onroad car has any form of tweak with this set of bearing supported weighted setup wheels! Place your car on a flat surface and have the weights spun on their side. Slowly lift your chassis and if a side rotates first, means that corresponding side is tweaked. Adjust your spring preload accordingly.

Where should I put the setup system on the table? Yeah Racing answers this question in-house! The aluminum holder holds the Yeah Racing Setup System YT-0140 perfectly and keeps the table tidy. Always within reach and at the same time protected appropriately for its value. Use with other setup systems is also conceivable - but only with the YT-0140 does it fit perfectly and...