CHASSIS RIDE HEIGHT GAUGE for Offroad

Professional fully-adjustable droop gauge to check the droop of the suspension downtravel in range 80~140mm. Great for quick and instant droop check directly on ready-to-race car with no other set-up equipment needed. This is the more professional version to the traditional droop gauge featuring an adjustable slider. The gauge is inserted on the nut that holds the shock on...

• For 1/8 and 1/10 off-road cars • Quick and instant droop check • 70~140mm range • Use on ready-to-race car • Wear resistant • Precise laser engraved scale • CNC-machined from aluminum • Black coated . Professional droop gauge to check the drop of the suspension downtravel in range 70~140mm. Great for quick and instant droop check directly on ready-to-race car with no other...

CHASSIS BALANCING SIMPLE TOOL (2 PCS.)

HUDY QUICK-TWEAK STATION + ALU CARRY CASE Having the proper tweak is one of the most important factors that influences a car’s overall performance; a badly-tweaked car has a very negative impact on a car's handling. Checking and correcting tweak is very important; pro racers check for tweak a number of times after each run. The HUDY Quick-Tweak Station allows you to quickly...

HUDY QUICK-TWEAK STATION + ALU CARRY CASE

HUDY Tweak Board is a very handy and useful tool for making sure that the chassis and top deck are completely straight after tightening down the top deck screws. The tweak board is used by all the professional drivers between runs to achieve a perfectly straight car without any unwanted mechanical tweak. To remove unwanted tweak takes only a seconds using HUDY Tweak Board...

Replacement for Quick Tweak Station 107904

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

Set Up Alu TRIANGLE

Set Up Alu TRIANGLE for Setup System HUDY 109301

Upside Measure Platte 1:8 Onroad for Setup System 108005 / 108001

Complete Set of Setup Tools + Carrying Bag - For 1/8 Onroad Car This set includes: 107701 - Chassis Droop Gauge Support Blocks 20mm for 1/8 - LW(2) 107711 - Chassis Droop Gauge -3 to 10 mm for 1/8, 1/10 107716 - Ultra-Fine Chassis Ride Height Gauge 3.8-8.0mm 107880 - Chassis Balancing Tool (2) 107903 - Tweak Station for 1/8 & 1/10 On-road Cars (without Alu Carry Case) 108005...

ALU NUT FOR SET-UP TRIANGLE (4)

CNC-machined premium-quality aluminum set-up wheels for 1/8 on-road cars allow for perfectly precise and repeatable set-up adjustment and tweak correction. Eliminates set-up errors inherent in using standard on-road tires. Precision-machined to exacting tolerances, each alu set-up wheel in a set is perfectly matched. Suspension set-up, ride height setting and checking tweak...

Size: 570x450mm Thickness: 10mm Weight: 1970g Suitable for: 1/8 offroad (also truggy!) Suitable measuring sticker: 108213 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

PLASTIC SET-UP BOARD DECAL Size: 420x330mm Suitable for: 1/8 onroad (no GT!) For HUDY board: 108200

PLASTIC SET-UP BOARD DECAL Size: 562x449mm Suitable for: 1/8 offroad (also truggy) For HUDY board: 108202

Size: 390x290mm Thickness: 10mm Weight: 860g Suitable for: 1/10 onroad + 1/12 Suitable measuring sticker: 108360 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 390x290mm Thickness: 10mm Weight: 860g Suitable for: 1/10 onroad + 1/12 Suitable measuring sticker: 108360 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 390x290mm Thickness: 10mm Weight: 860g Suitable for: 1/10 onroad + 1/12 Suitable measuring sticker: 108360 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 390x290mm Thickness: 10mm Weight: 860g Suitable for: 1/10 onroad + 1/12 Suitable measuring sticker: 108360 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 550x340mm Thickness: 10mm Weight: 1420g Suitable for: 1/8 onroad (no GT!) Suitable measuring sticker: 108560 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved. Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all...

Size: 550x340mm Thickness: 10mm Weight: 1420g Suitable for: 1/8 onroad (no GT!) Suitable measuring sticker: 108560 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 550x340mm Thickness: 10mm Weight: 1420g Suitable for: 1/8 onroad (no GT!) Suitable measuring sticker: 108560 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved

Size: 550x340mm Thickness: 10mm Weight: 1420g Suitable for: 1/8 onroad (no GT!) Suitable measuring sticker: 108560 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 550x340mm Thickness: 10mm Weight: 1420g Suitable for: 1/8 onroad (no GT!) Suitable measuring sticker: 108560 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

PLASTIC SET-UP BOARD DECAL Size: 545x331mm Suitable for: 1/8 onroad For HUDY board: 1085 01 / 108502 / 108503 / 108504 / 108505

Size: 390x335mm Thickness: 10mm Weight: 980g Suitable for: 1/10 offroad buggy Suitable measuring sticker: 108660 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 390x335mm Thickness: 10mm Weight: 980g Suitable for: 1/10 offroad buggy Suitable measuring sticker: 108660 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 390x335mm Thickness: 10mm Weight: 980g Suitable for: 1/10 offroad buggy Suitable measuring sticker: 108660 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 390x335mm Thickness: 10mm Weight: 980g Suitable for: 1/10 offroad buggy Suitable measuring sticker: 108660 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 390x335mm Thickness: 10mm Weight: 980g Suitable for: 1/10 offroad buggy Suitable measuring sticker: 108660 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

PLASTIC SET-UP BOARD DECAL Size: 386x331mm Suitable for: 1/10 offroad For HUDY board: 108601

Size: 550x405mm Thickness: 10mm Weight: 1640g Suitable for: 1/8 offroad + GT (no truggy!) Suitable measuring sticker: 108760 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 550x405mm Thickness: 10mm Weight: 1640g Suitable for: 1/8 offroad + GT (no truggy!) Suitable measuring sticker: 108760 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 550x405mm Thickness: 10mm Weight: 1640g Suitable for: 1/8 offroad + GT (no truggy!) Suitable measuring sticker: 108760 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

Size: 550x405mm Thickness: 10mm Weight: 1640g Suitable for: 1/8 offroad + GT (no truggy!) Suitable measuring sticker: 108760 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

PLASTIC SET-UP BOARD DECAL Size: 545x399mm Suitable for: 1/8 offroad + GT For HUDY board: 108701

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

Upside Measure Platte 1:8 Buggy , replacement for Setup System 108805 / 108801

Upside Measure Platte 1:8 Truggy for Setup System 108805 / 108801

Complete Set of Setup Tools + Carrying Bag - For 1/8 Offroad Cars This set includes: 107704 - Chassis Droop Gauge Support Blocks 30mm 1/8 Off-Road - LW (2) 107717 - Chassis Droop Gauge 0 to -13 mm for 1/8 Off-Road 107742 - Ride Height Gauge (20-30mm) 108801 - Universal Exclusive Set-up System for 1/8 Off-Road Cars 108860 - Alu Nut for 1/8 Off-Road System (4) 199241 - Set-Up...

ALU SET-UP WHEEL FOR 1/8 OFF-ROAD (4) Outer diameter: ca. 11,3 cm

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

Aluminum shim fits on the rear wheel axle, and the set-up system leans against the shim. For use with XRAY XB4 or any off-road car on which the set-up system cannot be inserted on the non-threaded part. The set-up system will then sit properly on the threaded area of rear wheel axles only. Set of 2.

Upside Measure Plate for 1/10 Off-Road Cars

COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/10 OFFROAD CARS (2WD & 4WD Buggy - like XRAY XB2 and XB4) The set contains: 107701 - CHASSIS DROOP GAUGE SUPPORT BLOCKS (20 MM) 107763 - Adjustable RIDE HEIGHT GAUGE 108901 - UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 OFFROAD CARS 199241 - SET-UP BAG FOR 1/10 OFFROAD CARS - EXCLUSIVE EDITION

ALU NUT FOR 1/10 OFF-ROAD SET-UP SYSTEM (4)

ALU SET-UP WHEEL FOR 1/10 OFFROAD BUGGY

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

HUDY 109325 - Alu 1/10 Formula Set-Up Wheel Axle Adapter

UPSIDE MEASURE PLATE FOR 1/10 TOURING CARS

COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/10 TOURING CARS The set contains: 107702 - CHASSIS DROOP GAUGE SUPPORT BLOCKS (10 MM) FOR 1/10 (2) 107714 - ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM 107716 - ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE 107880 - CHASSIS BALANCING SIMPLE TOOL (2 PCS.) 109301 - UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 TOURING CARS 109360 - ALU NUT...

ALU NUT FOR 1/10 TOURING SET-UP SYSTEM (4)

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

Alu Set Up Wheels 1/10 & 1/12 Adapter

COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/10 & 1/12 PAN CARS The set contains: 107713 - ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE 2-15mm 107715 - RIDE HEIGHT GAUGE BEVELED 1-15mm 107718 - RIDE HEIGHT GAUGE 2.6-5.6mm 107880 - CHASSIS BALANCING SIMPLE TOOL (2 PCS.) 109401 - UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 & 1/12 PAN CARS 107904 - QUICK-TWEAK STATION 199221 -...

ALU NUT M3 FOR 1/10 & 1/12 PAN CAR SET-UP SYSTEM (2)

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...